<div dir="ltr">Hi everyone,<div><br></div><div>i am trying to make an new plastic material to use in TRNbuild by using LBNL window software 7.4 and in software edited required data (see attached file) and transfer DOE-2 format file to TRNSbuild, A builtin TRNSbuild glass materail named (single,5.8) is 4 mm thick and i am preparing Polyethylene with 0.1mm thickness.. i am not sure where i am making mistake so that glass heat </div><div><br></div><div>loss is higher then polyethylene material eventhough TRNSYS build shows u-value for glass = 5.8 and polyethylene = 6.7. </div><div> </div><div>can i get any help who have experience to make new window by using Window software. </div><div><br></div><div><br></div><div>Best regards</div><div><br></div><div>Adnan</div></div>