[TRNSYS-users] GenOpt could not be found

[mcdowell at tess-inc.com]

It is unlikely that you have installed the GenOpt program in the
C:Trnsys17Optimization directory. You need to set this directory to the
one that you had GenOpt install its files into. 

The main TRNSYS directory is the where the TRNSYS files are located and
not where your project file is saved. I would guess that yours should be
set to C:Trnsys17. 

All of these are covered in the TrnOpt manual. I suggest that you work
through the example project first before starting your own optimization.


Regards, 

Tim 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI 53703
608-274-2577

On 2016-04-14 22:15, pshtony at gmail.com wrote: 

> Hello Users, 
> 
> I'm using TRNSYS 17 and recently, I try to use genopt(TRNOPT) in the optimization library. But I don't know what is wrong since the last week. 
> 
> Using the TRNOPT component, I was set some parameters to optimize my template. And then, at the 'setting' tab, in the TRNOPT17(TRNSYS - GenOpt link program), I also designate the three kind of file location 
> 
> 1. directory where the GenOpt Folder is located : C:Trnsys17Optimization 
> 
> 2. Location of Java Files : C:Program Files (x86)Javajre1.8.0_77bin 
> 
> 3. Main TRNSYS directory : C:UsersSEUNGHOONDesktopRnDDST_ModelDSTvolumePracticeTRNSYSprojetsprojectHR37FLSBCIgfunction 
> (my simulation studio file is here in this 37FLSBCIgfunction folder) 
> 
> And I did all I need (select input file as ~.dck, variables, and specify variables and select optimization method also) 
> 
> But If I click the 'Run Optimization' , I can see this error message. "GenOpt could not be found. Please check the directory in settings". 
> 
> Did I do something wrong?? Please give an advice. 
> 
> Best regard, 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20160415/76ca8d35/attachment.htm>