[TRNSYS-users] Fw: Ground heat exchanger .

[C K Lee]

Hello, Mahhamad Matareh.

The model provided in the TESS library (Type557) for the vertical ground 
heat exchanger is already an easy-to-use one which is based on the DST 
model from Hellstrom.  If you are not satisfied with it, you probably 
need to develop it by yourself.

Best Regards
C K Lee

On 2015-12-01 05:21, mcdowell at tess-inc.com wrote:
> Mahhamad Matareh -
> 
> Obviously asking the same question over and over is not getting you
> any help. If you think about what you are trying to simulation, look
> at the available example file, and come up with some questions to ask
> to help you better understand how to model this in TRNSYS rather than
> just asking people to give you a model, you might have better luck
> getting help.
> 
> Regards,
> 
> Tim
> 
> ---
> Timothy P. McDowell
> Executive Vice President
> Thermal Energy System Specialists, LLC
> 22 N Carroll St, Suite 370
> Madison, WI 53703
> 608-274-2577
> 
> On 2015-11-30 13:00, MOHAMMAD MATARNEH wrote:
> 
>> On Monday, November 30, 2015 8:47 PM, MOHAMMAD MATARNEH
>> <mmatarneh at yahoo.com> wrote:
>> 
>> Dear all ;
>> 
>> i will appreciate it if anyone send me trnsys simple model for GHP
>> (vertical ground heat exchanger) .
>> 
>> I tried the model in Tess library but its not that useful
>> 
>> please help me.
>> 
>> best regards.
>> Eng.mohamad
>> 
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
>> 
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>> [1]
> 
> 
> Links:
> ------
> [1] 
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org