[TRNSYS-users] Fw: Ground heat exchanger .

[mcdowell at tess-inc.com]

Mahhamad Matareh - 

Obviously asking the same question over and over is not getting you any
help. If you think about what you are trying to simulation, look at the
available example file, and come up with some questions to ask to help
you better understand how to model this in TRNSYS rather than just
asking people to give you a model, you might have better luck getting
help. 

Regards, 

Tim 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N Carroll St, Suite 370
Madison, WI 53703
608-274-2577

On 2015-11-30 13:00, MOHAMMAD MATARNEH wrote: 

> On Monday, November 30, 2015 8:47 PM, MOHAMMAD MATARNEH <mmatarneh at yahoo.com> wrote:
> 
> Dear all ; 
> 
> i will appreciate it if anyone send me trnsys simple model for GHP (vertical ground heat exchanger) . 
> 
> I tried the model in Tess library but its not that useful 
> 
> please help me. 
> 
> best regards. 
> Eng.mohamad 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org [1]
 

Links:
------
[1]
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151130/0139f5da/attachment-0002.htm>