[TRNSYS-users] Follow up on Type56 Inverted-Matrix Error

[Bradley Painting]

Regarding my earlier message about the Type56 Inverted Matrix error:

(Subroutine MATRIX-INVERT was called from the type 56 multizone building
model with an array size greater than 50 x 50).

It seems like switching to a smaller time step fixed the problem. I was
only using 1 hour steps and switched to half hour.

-- 

Brad Painting

Master of Science Candidate, Renewable Energy Engineering

Department of Technology & Environmental Design

Appalachian State University

Boone, NC  28608
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151109/d0419aec/attachment-0002.htm>