[TRNSYS-users] PV/wind system

[David BRADLEY]

Ahmed,
   I would recommend you start by working with the Wind-Diesel example 
(..\Trnsys17\Examples\Wind Diesel\) and the Stand Alone Power System 
example (..\Trnsys17\Examples\Stand-Alone Power System\). Both combine 
wind turbines with various backup devices. The same methods can be used 
to combine wind turbines and PV.
regards,
  David


On 3/26/2015 4:27 AM, Ahmed Alnozahy wrote:
> Dear Trnsys users,,,
>
> I want to know how I can simulate hybrid renewable energy system 
> consists of Photovoltaic (PV) and wind turbine in Trnsys Studio.
> The important issue how I can connect the components together (i.e. 
> which output from one component should connect to the input of the 
> other component).
>
> Best regards
> *Ahmed Elnaem Elnozahy
> *
> PhD Student
> Energy Resources Engineering (ERE) Department
> Egypt-Japan University of Science and Technology (E-JUST), Egypt
> *Mobil: 002-01147160726**
> E-mail : ahmedalnozahy at yahoo.com*
> ahmed.elnozahy at ejust .edu.eg
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150326/150fa55e/attachment-0002.htm>