[TRNSYS-users] Heating-cooling activated while inside temperature limits

[David BRADLEY]

Maarten,
   Please send the project files to your distributor so that they can 
have a look. There are so many different ways that the reporting and 
models could be set up that would explain what you are seeing that it is 
not possible to guess just from looking at the output file.

   As a side note (I don't think it is related) we highly recommend 
setting your computer to use the "." as the decimal separator and the 
"," as the thousands separator when running TRNSYS. TRNSYS uses the "," 
to separate values and the "." only in numbers.
kind regards,
  David


On 6/3/2015 8:24 AM, Maarten Sourbron wrote:
>
> Dear TRNSYS users,
>
> We encounter a problem that, using the heating and cooling function in 
> a simple building zone, the results show heating or cooling at hours 
> where the air node temperature is within the imposed 20-23 °C limits.  
> Heating and cooling power are set to unlimited, the building zone has 
> 1 exterior wall with a window, concrete floor and ceiling and 
> lightweight internal walls.
>
> TRNSYS17, Trnbuild 2.0
>
> (see attached file e.g. hour 12, 14, 66, 68, 70, 83)
>
> Any suggestions?
>
> Maarten Sourbron
>
> Université Laval
>
> Québec, Canada
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150603/e2a5348e/attachment-0001.htm>