[TRNSYS-users] Heating-cooling activated while inside temperature limits

[Maarten Sourbron]

Dear TRNSYS users,

We encounter a problem that, using the heating and cooling function in a simple building zone, the results show heating or cooling at hours where the air node temperature is within the imposed 20-23 °C limits.  Heating and cooling power are set to unlimited, the building zone has 1 exterior wall with a window, concrete floor and ceiling and lightweight internal walls.
TRNSYS17, Trnbuild 2.0
(see attached file e.g. hour 12, 14, 66, 68, 70, 83)

Any suggestions?

Maarten Sourbron
Université Laval
Québec, Canada
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150603/8c42fc7f/attachment.htm>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: testsetpoints.txt
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150603/8c42fc7f/attachment.txt>