[TRNSYS-users] Battery in PV system
David BRADLEY
d.bradley at tess-inc.com
Tue Dec 8 11:02:12 PST 2015
Fabián,
The battery models ask you to specify the energy capacity per cell
(in Ah) and to specify the number of cells in series and in parallel
that make up the battery bank. Use these parameters to control the
amount of electrical storage in your system.
regards,
David
On 12/07/2015 07:47, Fabián Daniel Tarsetti Abarca wrote:
> Hi, i'm doing a PV system for a Reverse Osmosis Plant. The system
> consist in a PV, Battery, inverter, regulator, pumps, etc. I have
> problems only in the amount of battery. how can put more of a battery?.
>
> Thanks for your answer.
>
> --
> *Fabián Tarsetti Abarca*
> /Estudiante Ingeniería Civil Mecánica
> UTFSM CSSJ/
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151208/fab17258/attachment-0003.htm>
More information about the TRNSYS-users
mailing list