[TRNSYS-users] TRNSYS-users Digest, Vol 132, Issue 9

SALAH-EDDINE BENKADDOUR salah-eddine.benkaddour at ensem.ac.ma
Wed Dec 9 02:56:40 PST 2015


Dear,

Hi,i'am doing a home in trnbuild , after that i want to add a battery in
TRNSYS  alimented with PV panel . The energy provided from the battery must
change in the end depending on the consumption of materials !!   I NEED TO
SEE HOW THIS ENERGY CAN CHAGE DEPANDING ON DIFFERENT PARAMETR

Look so easy but i'm still blocked

Best Regards



2015-12-08 21:05 GMT+00:00 <trnsys-users-request at lists.onebuilding.org>:

> Send TRNSYS-users mailing list submissions to
>         trnsys-users at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> or, via email, send a message with subject or body 'help' to
>         trnsys-users-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>         trnsys-users-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>    1. Type55 (periodic integrator) output6 (???v v)
>    2. Re: Battery in PV system (David BRADLEY)
>
>
> ---------- Message transféré ----------
> From: "吴伟伟v v" <xiaoweiweiwu at hotmail.com>
> To: "trnsys-users at lists.onebuilding.org" <
> trnsys-users at lists.onebuilding.org>
> Cc:
> Date: Tue, 8 Dec 2015 14:56:51 +0800
> Subject: [TRNSYS-users] Type55 (periodic integrator) output6
>
> Dear all,
>
>
> I got a type55 (periodic integrator) output 6’s wrong output.  I chose
> type55 to get the sum of the squares of the input to compute the penalty
> function (P71,  GENOPTuser manual). But I found that the output6 of the
> type55 is not it should be, while other results, such as the minimum value
> and the mean value are right though.
>
>
> For example, the only one input for the type55 is from 1, 2, 3, 4, 5, 6,
> ……….to 24. The simulation step is 1hr, I want to evaluation the output6
> from 8am to 16pm for everyday. The simulation time from 0 to 24 in the
> TRNSYS studio.The set of the typer55 parameter is as the following:
>
>
> Integrate or sum input: -1
>
> Relative starting hour for input    7     hr
>
> Duration for input  8     hr
>
> Cycle repeat time for input   24    hr
>
> Reset time for input      24    hr
>
> Absolute starting hour for input  0     hr
>
> Absolute stopping hour for input       24    hr
>
>
> According to my understand, the output6 of type55 should be:
>
>
> For the 8th hour: 8*8=64
>
> the 9th hour: 8*8+9*9=136
>
> the 10th hour: 8*8+9*9+10*10=236
>
> ……………….
>
> until add to 8*8+9*9+10*10+……………………+16*16
>
>
>
> But the output6 of the type55 results was: (from 8th to 16th ):
>
> 0
>
> 1
>
> 2
>
> 5
>
> 10
>
> 18
>
> 28
>
> 42
>
>
>
> May anybody help me figure out this problem? I am appreciated for your
> reply.
>
>
>
> With best regards,
>
>
>
> Yours sincerely
>
> Weiwei
>
> Chongqing University
>
>
> ---------- Message transféré ----------
> From: David BRADLEY <d.bradley at tess-inc.com>
> To: "TRNSYS users mailing list at OneBuilding.org" <
> trnsys-users at lists.onebuilding.org>, fabian.tarsetti at gmail.com
> Cc:
> Date: Tue, 8 Dec 2015 13:02:12 -0600
> Subject: Re: [TRNSYS-users] Battery in PV system
> Fabián,
>   The battery models ask you to specify the energy capacity per cell (in
> Ah) and to specify the number of cells in series and in parallel that make
> up the battery bank. Use these parameters to control the amount of
> electrical storage in your system.
> regards,
>  David
>
>
> On 12/07/2015 07:47, Fabián Daniel Tarsetti Abarca wrote:
>
> Hi, i'm doing a PV system for a Reverse Osmosis Plant. The system consist
> in a PV, Battery, inverter, regulator, pumps, etc. I have problems only in
> the amount of battery. how can put more of a battery?.
>
> Thanks for your answer.
>
> --
> *Fabián Tarsetti Abarca*
>
> *Estudiante Ingeniería Civil Mecánica UTFSM CSSJ*
>
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at lists.onebuilding.orghttp://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475d.bradley at tess-inc.com
> http://www.tess-inc.comhttp://www.trnsys.com
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20151209/8d6931f5/attachment.htm>


More information about the TRNSYS-users mailing list