[TRNSYS-users] wall transmittance

[Francesca Pagliaro]

Thank you Jing for your answer. I'm actually trying to solve an unsteady
calculation and compare the results with experimental data, therefore I'd
prefer a type where the equation is already inside.

2015-04-20 21:59 GMT+02:00 Jing Hong <hongjing.shirley at gmail.com>:

> Francesca,
>
> If you are just going to make a simple calculation, you may try TYPE 9 as
> data input, insert equation for calculation and add a printer to get output.
>
> Jing
>
> On Mon, Apr 20, 2015 at 9:33 AM, Francesca Pagliaro <
> francesca.pagl at gmail.com> wrote:
>
>> Hello Trnsys users, I’m trying to solve an inverse problem related to
>> wall transmittance. Is it possible to calculate the transmittance of a wall
>> setting in Trnsys only the external  and internal input such as heat flux,
>> temperature, area, on the two sides of the wall? If yes, how?
>>
>> Thanks
>>
>>
>> Best regards
>>
>>
>> Francesca
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at lists.onebuilding.org
>> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>>
>>
>
>
> --
> Doctoral Student
>
> University of Wisconsin-Milwaukee
> School of Architecture and Urban Planning
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150421/bb8face3/attachment-0003.htm>