[TRNSYS-users] wall transmittance

[Jing Hong]

Francesca,

If you are just going to make a simple calculation, you may try TYPE 9 as
data input, insert equation for calculation and add a printer to get output.

Jing

On Mon, Apr 20, 2015 at 9:33 AM, Francesca Pagliaro <
francesca.pagl at gmail.com> wrote:

> Hello Trnsys users, I’m trying to solve an inverse problem related to wall
> transmittance. Is it possible to calculate the transmittance of a wall
> setting in Trnsys only the external  and internal input such as heat flux,
> temperature, area, on the two sides of the wall? If yes, how?
>
> Thanks
>
>
> Best regards
>
>
> Francesca
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
>


-- 
Doctoral Student

University of Wisconsin-Milwaukee
School of Architecture and Urban Planning
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150420/7b2abbc9/attachment-0003.htm>