[TRNSYS-users] Help to Heating District with Trnsys16.1 model

[Laura Fasciolo]

Thank you so much David for your answer!

I have another 2 questions:

1) In the case of summer operation, I have to "exchange the cold", so I
have to use a cold heat exchanger that, powered by a cold fluid, must cool
the another fluid. Which kind of heat exchanger I have to use? Which type
do you suggest me?

2) I have to simulate both the winter operation and the summer operation.
Is there a way to change the conditions of the system with its parameters
during the same simulation?

Thank you again!
Kind regards,
Laura



2015-03-25 19:07 GMT+01:00 David BRADLEY <d.bradley at tess-inc.com>:

>  Laura,
>  Type907 in the TESS CHP library has the features that you are looking for.
> kind regards,
>  David
>
>
>
> On 3/23/2015 4:55 PM, Laura Fasciolo wrote:
>
> Thank you so much David for your answer!
>
> I need a cogenerator, an engine which has a hot water flowrate and a
> certain temperature, as outputs. This is the reason why I asked for help
> with an ICE component and an heat generator.
>
> Could you help me? Can I find a type for a cogenerator, an engine which
> has a hot water flowrate and a certain temperature, as outputs? I have
> Trnsys 16.1 with TESS library.
>
>  Thank you again!
>
>  Best Regards,
> Lally
>
>
>
> 2015-03-23 21:53 GMT+01:00 David BRADLEY <d.bradley at tess-inc.com>:
>
>>  Lally,
>>  There is a diesel engine generator component available in the standard
>> TRNSYS library (Type120). There is a different model of an internal
>> combustion engine in the TESS CHP library (which is an add-on to the
>> standard package). I am not sure what (specifically) you mean by a heat
>> generator. There are quite a few TRNSYS components that simulate devices
>> that generate heat.
>> kind regards,
>>  David
>>
>>
>> On 3/23/2015 9:05 AM, Laura Fasciolo wrote:
>>
>> Hi Trnsys people! I'm trying to simulate a model of Heating District with
>> Trnsys 16.1 , in my final thesis at the university. Does somebody know some
>> Trnsys Types to simulate an ICE component and a Heat Generator?
>> Thanks to everybody!
>>
>>
>>  _______________________________________________
>> TRNSYS-users mailing listTRNSYS-users at lists.onebuilding.orghttp://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>>
>>
>> --
>> ***************************
>> David BRADLEY
>> Principal
>> Thermal Energy Systems Specialists, LLC
>> 22 North Carroll Street - suite 370
>> Madison, WI  53703 USA
>>
>> P:+1.608.274.2577
>> F:+1.608.278.1475d.bradley at tess-inc.com
>> http://www.tess-inc.comhttp://www.trnsys.com
>>
>>
>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475d.bradley at tess-inc.com
> http://www.tess-inc.comhttp://www.trnsys.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20150401/95b81708/attachment-0003.htm>