[TRNSYS-users] PID controller parameters setting

何磊 swjtuhl822 at 126.com
Tue Sep 23 20:01:04 PDT 2014


Hi everyone,
I have encountered some problems when the PID controller(type23) was used for controling the outlet air temperature of cooling coil.


The fluid flow rate of cooling coil is conected with a outlet of flow diverter(type11), the fluid flow rate of cooling coil is determined by the control signal of the flow diverter. It is in order to model a cooling cooling with a bypass in fluid side.


Then, the PID control is used for keeping the outlet air temperature (Controlled variable) of cooling coil at a setpoint, the control signal is the fluid proportion of the flow diverter. 


But no matter how to adjust the parameters of PID, the outlet air temperature oscillation cann't be eliminated.


so, I have two questions about this simulation.


1)How to determine the parameters of PID controller, sunch as Gain constant, Integral time and Derivative time, to avoid  Controlled variable oscillation ? 


2)is there some regular between the simulation time step and the parameters ? 


If anyone has experience in this respect, could please tell me how to choose the simulation time step and the PID parameters ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140924/986a275a/attachment-0001.htm>


More information about the TRNSYS-users mailing list