[TRNSYS-users] Relative humidity gets 100% easily

Tung Nguyen Huy nguyenhuytung.cxd1 at gmail.com
Wed Nov 5 06:33:22 PST 2014


Dear alls,

I'm running the simulation for a terraced building. After setting all the
parameters, I run the simulation. Unfortunately, my results are very bad.
The relative humidity is nearly 100% and the indoor temperature is lower
than the outdoor temperature. I tried to increase the ventilation up to 15
ACH per hour, but it seems not much change. I also changed the capacitance
humidity model to 10 (for typical room) but it doesn't improve much.

Is there anyone facing the same problems with me. Please share and help me
deal with this.

Thank you so much!!!!

Best regrads,

-- 
Nguyen Huy TUNG

-----------------------------
Lecturer in Civil Engineering Department
Construction Technical College number 1
Trung Van, Tu Liem, Ha Noi, Vietnam
Mobile: +84.934.353.344
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20141105/045954ae/attachment-0003.htm>


More information about the TRNSYS-users mailing list