[TRNSYS-users] Creating new compoment, system cannot find the file specified, Intel Visual Fortran

[David BRADLEY]

Wenye,
   The *.dsp file can be ignored. The method that I would recommend is 
to open the IVF solution (compile project) found in 
..\Trnsys17\Compilers\IvfCXE2011\IvfCXE2011.sln. One of the three 
projects in the solution is called MyType. Right click on the MyType 
project in the solution explorer on the right. Select "Add: Existing 
Item" from the context menu and add the *.for file that was exported 
from the Studio. When you build or rebuild the project a file called 
MyType.dll will be created and will contain your component. Make sure 
that you are compiling in the appropriate mode (debug or release) to 
match the TRNDll (probably release). You can check which mode TRNDll is 
in by running a simulation and looking at the early notices written in 
the *.log file.
Kind regards,
  David


On 11/5/2014 18:30, Wenye Lin wrote:
>
> Hi, there:
>
> I got some problem in creating a new component by TRNSYS17. When I 
> exported a new component as Fortran, it showed that "the system cannot 
> find the file specified".
>
> I do install Intel Visual Fortran XE2015 and Microsoft Visual Studio 
> 2010 (shell) in my computer. I checked the files created by TRNSYS, 
> there were a .for file, and a .dsp file which I guessed can be opened 
> by Visual Fortran. However, when I tried to open the .dsp file by 
> Visual Fortran manually, the Visual Fortran cannot read the .dsp file. 
> How to cope with the problem?
>
> P.S.
>
> I checked the Fortran environment in TRNSYS17 
> (File\Setting\Directories\Fortran environment), and the Fortran 
> environment was "C:\Program Files\...\Common\dfdev.exe". It seemed 
> that the installation path of my Visual Fortran was not installed in 
> the path. (According to the TRNSYS17 documentation 01 Getting 
> start, Visual Fortran should be installed in the path). Then I tried 
> to change the environment to the actual path where my Visual Fortran 
> was installed, however, I could not fine the so call "dfdev.exe" file.
>
> Could you give me some advices about the disturbing problem?
>
> William Lin
> PhD candidate; Tel: (+61)0452462323
> Sustainable Buildings Research Centre (*SBRC*)
> Innovation Campus, University of Wollongong, NSW, 2500
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20141106/d9fb94da/attachment-0002.htm>