Dear all and Mr. Bradley,
I used Type 93 to obtain TSI_S7 (inside surface temperature of ceiling) of
last time step as the input of my Equation. Therefore, I need to store 1
input for 1 timestep (these are the two parameters in Type93). My idea is
that I get the result of Type56 (TSI_S7 temperature) and use it as input1
to Type93. Then, I use the output from Type93 as the temperature that I use
in my equation. However, after running, it always exists the ERROR as
follows:
*** Fatal Error at time : 0.000000
Generated by Unit : 44
Generated by Type : 93
TRNSYS Message 103 : The TRNSYS TYPE checking routine has found an
inconsistency in the specified component between the input file and the
information expected by the Type
Reported information : An illegal number of INPUTS has been specified
for this component. Please check the component configuration. 1 INPUTS are
required and 2 were specified.
Attached is Lst File.
However, There are 2 Inputs for Type 93. One links to TSI_S7 (inside
surface temperature of ceiling), another is Noname. How should I deal with
2nd Input Noname?
How could I deal with this ERROR problem?
Many thanks in advance!
Br.
yang wang
2014-05-23 21:01 GMT+02:00 王洋 <wanghongyang1767 at gmail.com>:
> Dear all and Mr. Bradley,
>
> I used Type 93 to obtain TSI_S7 (inside surface temperature of ceiling) of
> last time step as the input of my Equation. Therefore, I need to store 1
> input for 1 timestep (these are the two parameters in Type93). My idea is
> that I get the result of Type56 (TSI_S7 temperature) and use it as input1
> to Type93. Then, I use the output from Type93 as the temperature that I use
> in my equation. However, after running, it always exists the ERROR as
> follows:
>
> *** Fatal Error at time : 0.000000
> Generated by Unit : 44
> Generated by Type : 93
> TRNSYS Message 103 : The TRNSYS TYPE checking routine has found an
> inconsistency in the specified component between the input file and the
> information expected by the Type
> Reported information : An illegal number of INPUTS has been specified
> for this component. Please check the component configuration. 1 INPUTS are
> required and 2 were specified.
>
> Attached is Lst File.
>
> However, There are 2 Inputs for Type 93. One links to TSI_S7 (inside
> surface temperature of ceiling), another is Noname. How should I deal
> with 2nd Input Noname?
>
> How could I deal with this ERROR problem?
>
> Many thanks in advance!
>
> Br.
>
> yang wang
>
>
>
> 2014-05-23 19:00 GMT+02:00 <trnsys-users-request at cae.wisc.edu>:
>
>> Send TRNSYS-users mailing list submissions to
>> trnsys-users at cae.wisc.edu
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>> or, via email, send a message with subject or body 'help' to
>> trnsys-users-request at cae.wisc.edu
>>
>> You can reach the person managing the list at
>> trnsys-users-owner at cae.wisc.edu
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of TRNSYS-users digest..."
>>
>> Today's Topics:
>>
>> 1. Re: problem with type 752e (David BRADLEY)
>>
>>
>> ---------- 已转发邮件 ----------
>> From: David BRADLEY <d.bradley at tess-inc.com>
>> To: Nidal Abdalla <nidalabdalla at yahoo.com>, "TRNSYS users mailing list
>> at the Solar Energy Lab, UW-Madison" <trnsys-users at cae.wisc.edu>
>> Cc:
>> Date: Fri, 23 May 2014 11:31:05 -0500
>> Subject: Re: [TRNSYS-users] problem with type 752e
>> Nidal,
>> My apologies for the delay in getting back to you. This is a known bug
>> with one of the modes of Type752. The fix is in the next scheduled release.
>> If you need the fix immediately, please contact your distributor and we can
>> get it to you through them.
>> Kind regards,
>> David
>>
>>
>>
>> On 5/18/2014 18:44, Nidal Abdalla wrote:
>>
>> Dear all
>>
>> I am trying use of type 752e to control the humidity ratio with type 56
>> (in TRNSYS 17). But I couldn't find Absolute Humidity Ratio in the input
>> tab. It is replaced with "Not Used". Moreover an error occur when I run tpf
>> file as: "trnsys message 142 for type 752: a three litter unit code was
>> set for an input number beyond the range reserve for this type". I changed
>> humidity mode to 1, but the problem still found.
>> Any one can help me?
>>
>> regards
>>
>> Nidal
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>> --
>> ***************************
>> David BRADLEY
>> Principal
>> Thermal Energy Systems Specialists, LLC
>> 22 North Carroll Street - suite 370
>> Madison, WI 53703 USA
>>
>> P:+1.608.274.2577
>> F:+1.608.278.1475d.bradley at tess-inc.com
>> http://www.tess-inc.comhttp://www.trnsys.com
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140526/b60ebc88/attachment-0004.htm>
-------------- next part --------------
TRNSYS - the TRaNsient SYstem Simulation program
The Solar Energy Lab at the University of Wisconsin - Madison, USA
Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France
Transsolar Energietechnik GmBH, Stuttgart, Germany
Thermal Energy System Specialists, Madison Wisconsin, USA
Release 16.01.0003
Listing file for: "V:\Gr_Biomasse\Pr_Laufend\102239_FOSBOS_2009\8 Wang\program\TRNSYS\ReferenceTceilingasWinter_holiday_heat recovery cold Tout_May23rd2014\BuildingProject12.dck"
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The TRNSYS Executable (TRNExe.exe) and main DLL (TRNDll.dll) are located in "C:\Programme\TRNSYS16_1\Exe"
*** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal errors.
*** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal errors found.
*** Evaluating the EQUATIONs and CONSTANTs to determine their initial values.
*** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin processing the remainder of the TRNSYS input file.
VERSION 16
*******************************************************************************
*** TRNSYS input file (deck) generated by TrnsysStudio
*** on Freitag, Mai 23, 2014 at 20:50
*** from TrnsysStudio project: V:\Gr_Biomasse\Pr_Laufend\102239_FOSBOS_2009\8 Wang\program\TRNSYS\ReferenceTceilingasWinter_holiday_heat recovery cold Tout_May23rd2014\BuildingProject12.tpf
***
*** If you edit this file, use the File/Import TRNSYS Input File function in
*** TrnsysStudio to update the project.
***
*** If you have problems, questions or suggestions please contact your local
*** TRNSYS distributor or mailto:software at cstb.fr
***
*******************************************************************************
*******************************************************************************
*** Units
*******************************************************************************
*******************************************************************************
*** Control cards
*******************************************************************************
* START, STOP and STEP
CONSTANTS 3
START=0
STOP=8760
STEP=0.1
* User defined CONSTANTS
! Start time End time Time step
SIMULATION 0.0000000000000000E+00 8.7600000000000000E+03 1.0000000000000001E-01
! Integration Convergence
TOLERANCES 1.0000000000000002E-03 1.0000000000000002E-03
! Max iterations Max warnings Trace limit
LIMITS 30 30 31
! TRNSYS numerical integration solver method
DFQ 1
! TRNSYS output file width, number of characters
WIDTH 72
! NOLIST statement
LIST
! MAP statement
! Solver statement Minimum relaxation factor Maximum relaxation factor
SOLVER 0
1.000000000000000
1.000000000000000
! Nan DEBUG statement
NAN_CHECK 0
! Overwrite DEBUG statement
OVERWRITE_CHECK 0
! disable time report
TIME_REPORT 0
! EQUATION SOLVER statement
EQUATION SOLVING METHOD 0
* EQUATIONS "Turn"
*
EQUATIONS 5
TURN = 345
AA_N = 180 + TURN
AA_S = TURN
AA_E = -90 + TURN
AA_W = 90 + TURN
*$UNIT_NAME Turn
*$LAYER Main
*$POSITION 49 61
*------------------------------------------------------------------------------
* EQUATIONS "Radiation"
*
EQUATIONS 18
AISZ = [109,10]
AISA = [109,11]
IT_H = Max([109,12],0)
IB_H = Max([109,13],0)
ID_H = [109,14]
AI_H = [109,16]
IT_N = [109,18]
AI_N = [109,22]
IB_N = [109,19] * LT(AI_N,90)
IT_S = [109,24]
IB_S = [109,25]
AI_S = [109,28]
IT_E = [109,30]
IB_E = [109,31]
AI_E = [109,34]
IT_W = [109,36]
IB_W = [109,37]
AI_W = [109,40]
*$UNIT_NAME Radiation
*$LAYER Main
*$POSITION 195 125
*------------------------------------------------------------------------------
* EQUATIONS "Shading+Light"
*
EQUATIONS 2
! 24
S_SOUTH = [202,1]
! 27
BRIGHT = [200,1]
*$UNIT_NAME Shading+Light
*$LAYER Controls
*$POSITION 664 722
*------------------------------------------------------------------------------
* Model "Weather data" (Type 109)
*
UNIT 109 TYPE 109 data
*$UNIT_NAME Weather data
*$MODEL .\Weather Data Reading and Processing\Standard Format\TMY2\Type109-TMY2.tmf
*$POSITION 95 200
*$LAYER Main #
PARAMETERS 4
! 1 Data Reader Mode
! 2 Logical unit
! 3 Sky model for diffuse radiation
! 4 Tracking mode
2.0000000000000000E+00 3.0000000000000000E+01 4.0000000000000000E+00 1.0000000000000000E+00
INPUTS 9
! [unconnected] Ground reflectance
! [unconnected] Slope of surface-1
! [unconnected] Azimuth of surface-1
! [unconnected] Slope of surface-2
! [unconnected] Azimuth of surface-2
! [unconnected] Slope of surface-3
! [unconnected] Azimuth of surface-3
! [unconnected] Slope of surface-4
! [unconnected] Azimuth of surface-4
CONST CONST CONST CONST CONST
CONST CONST CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000001E-01 9.0000000000000000E+01 5.2500000000000000E+02 9.0000000000000000E+01 3.4500000000000000E+02
9.0000000000000000E+01 2.5500000000000000E+02 9.0000000000000000E+01 4.3500000000000000E+02
*** External files
ASSIGN U:\work\TRNSYS Weather\Weather\Meteonorm\Europe\DE-Muenchen-Airp-108700.tm2 30
*|? Weather data file |1000
*------------------------------------------------------------------------------
* Model "Psychrometrics" (Type 33)
*
UNIT 331 TYPE 33
*$UNIT_NAME Psychrometrics
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Relative Humidity Known\Type33e.tmf
*$POSITION 204 325
*$LAYER Main #
PARAMETERS 3
! 1 Psychrometrics mode
! 2 Wet bulb mode
! 3 Error mode
2.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00
INPUTS 3
! Weather data:Ambient temperature ->Dry bulb temp.
! Weather data:relative humidity ->Percent relative humidity
! [unconnected] Pressure
109,1 109,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 5.0000000000000000E+01 1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Sky temp" (Type 69)
*
UNIT 69 TYPE 69 temp
*$UNIT_NAME Sky temp
*$MODEL .\Physical Phenomena\Sky Temperature\calculate cloudiness factor\Type69b.tmf
*$POSITION 354 273
*$LAYER Main # #
PARAMETERS 2
! 1 mode for cloudiness factor
! 2 height over sea level
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 4
! Psychrometrics:Dry bulb temperature ->Ambient temperature
! Psychrometrics:Dew point temperature. ->Dew point temperature at ambient conditions
! Weather data:beam radiation on horitonzal ->Beam radiation on the horizontal
! Weather data:sky diffuse radiation on horizontal ->Diffuse radiation on the horizontal
331,7 331,8 109,13 109,14
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "Light Thresholds"
*
EQUATIONS 2
Toth_L_on = -3.6*120
Eoth_L_off = -3.6*200
*$UNIT_NAME Light Thresholds
*$LAYER Controls
*$POSITION 461 530
*------------------------------------------------------------------------------
* Model "Lights" (Type 2)
*
UNIT 200 TYPE 2
*$UNIT_NAME Lights
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\generic\Solver 0 (Successive Substitution) Control Strategy\Type2d.tmf
*$POSITION 566 541
*$LAYER Controls #
*$# NOTE: This controller can only be used with Solver 0 (Successive substitution)
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
PARAMETERS 2
! 1 No. of oscillations
! 2 High limit cut-out
5.0000000000000000E+00 4.0000000000000000E+04
INPUTS 6
! [unconnected] Upper input value
! Radiation:IT_H ->Lower input value
! [unconnected] Monitoring value
! Lights:Output control function ->Input control function
! Light Thresholds:Toth_L_on ->Upper dead band
! Light Thresholds:Eoth_L_off ->Lower dead band
CONST IT_H CONST 200,1 TOTH_L_ON
EOTH_L_OFF
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Shading S" (Type 2)
*
UNIT 202 TYPE 2 S
*$UNIT_NAME Shading S
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\generic\Solver 0 (Successive Substitution) Control Strategy\Type2d.tmf
*$POSITION 346 754
*$LAYER Controls #
*$# NOTE: This controller can only be used with Solver 0 (Successive substitution)
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
PARAMETERS 2
! 1 No. of oscillations
! 2 High limit cut-out
5.0000000000000000E+00 5.0000000000000000E+03
INPUTS 6
! Radiation:IT_S ->Upper input value
! [unconnected] Lower input value
! [unconnected] Monitoring value
! Shading S:Output control function ->Input control function
! [unconnected] Upper dead band
! [unconnected] Lower dead band
IT_S CONST CONST 202,1 CONST
CONST
*** INITIAL INPUT VALUES
1.5000000000000000E+01 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0800000000000000E+03
3.6000000000000000E+02
*------------------------------------------------------------------------------
* Model "Building" (Type 56)
*
UNIT 56 TYPE 56
*$UNIT_NAME Building
*$MODEL .\Loads and Structures\Multi-Zone Building\With Standard Output Files\Type56a.tmf
*$POSITION 737 594
*$LAYER Main # #
*$#
PARAMETERS 6
! 1 Logical unit for building description file (.bui)
! 2 Star network calculation switch
! 3 Weighting factor for operative temperature
! 4 Logical unit for monthly summary
! 5 Logical unit for hourly temperatures
! 6 Logical unit for hourly loads
3.1000000000000000E+01 1.0000000000000000E+00 5.0000000000000000E-01 3.2000000000000000E+01 3.3000000000000000E+01
3.4000000000000000E+01
INPUTS 31
! Psychrometrics:Dry bulb temperature -> 1- TAMB
! Psychrometrics:Percent relative humidity -> 2- RELHUMAMB
! Sky temp:Fictive sky temperature -> 3- TSKY
! Radiation:IT_N -> 4- IT_NORTH
! Radiation:IT_S -> 5- IT_SOUTH
! Radiation:IT_E -> 6- IT_EAST
! Radiation:IT_W -> 7- IT_WEST
! Radiation:IT_H -> 8- IT_HORIZONTAL
! Radiation:IB_N -> 9- IB_NORTH
! Radiation:IB_S -> 10- IB_SOUTH
! Radiation:IB_E -> 11- IB_EAST
! Radiation:IB_W -> 12- IB_WEST
! Radiation:IB_H -> 13- IB_HORIZONTAL
! Radiation:AI_N -> 14- AI_NORTH
! Radiation:AI_S -> 15- AI_SOUTH
! Radiation:AI_E -> 16- AI_EAST
! Radiation:AI_W -> 17- AI_WEST
! Radiation:AI_H -> 18- AI_HORIZONTAL
! [unconnected] 19- CNAT_1
! [unconnected] 20- T_COOL_ON
! [unconnected] 21- S_NORTH
! S_South:Shading_South -> 22- S_SOUTH
! [unconnected] 23- S_EAST
! [unconnected] 24- S_WEST
! Shading+Light:BRIGHT -> 25- BRIGHT
! winter heating:heating -> 26- WINTER
! [unconnected] 27- SUMMER
! Tcool:Tcool -> 28- TCOOL
! Vent Rate:dayvent -> 29- DAYVECH
! People Occupancy:peopleoccupancy -> 30- PEOPLEOCCUPANCY
! Vent Temp:tempnightvent -> 31- TNIGHTVENT
331,7 331,6 69,1 IT_N IT_S
IT_E IT_W IT_H IB_N IB_S
IB_E IB_W IB_H AI_N AI_S
AI_E AI_W AI_H CONST CONST
CONST SHADING_SOUTH CONST CONST BRIGHT
HEATING CONST TCOOL DAYVENT PEOPLEOCCUPANCY
TEMPNIGHTVENT
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00
*** External files
ASSIGN BuildingProject12.bui 31
*|? Building description file (*.bui) |1000
ASSIGN T56_std-Output.sum 32
*|? Monthly Summary File |1000
ASSIGN T56_std-temp.prn 33
*|? Hourly Temperatures |1000
ASSIGN T56_std-q.prn 34
*|? Hourly Loads |1000
*------------------------------------------------------------------------------
* Model "Temperature" (Type 65)
*
UNIT 25 TYPE 65
*$UNIT_NAME Temperature
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf
*$POSITION 1143 605
*$LAYER Main # #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical unit for output file
! 11 Output file units
! 12 Output file delimiter
6.0000000000000000E+00 9.0000000000000000E+00 -1.0000000000000000E+01 3.6000000000000000E+01 -1.0000000000000000E+01
3.6000000000000000E+01 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 15
! Building: 1- TAIR_ROOM228 ->Left axis variable-1
! Type91:Cold-side outlet temperature ->Left axis variable-2
! Weather data:Ambient temperature ->Left axis variable-3
! Type91:Heat transfer rate ->Left axis variable-4
! Vent Rate:dayvent ->Left axis variable-5
! Vent Temp:tempnightvent ->Left axis variable-6
! [unconnected] Right axis variable-1
! Building: 13- TSI_S6 ->Right axis variable-2
! Building: 4- QVENT_ROOM228 ->Right axis variable-3
! Building: 6- QHEAT_ROOM228 ->Right axis variable-4
! Building: 7- QCOOL_ROOM228 ->Right axis variable-5
! Weather data:total radiation on horizontal ->Right axis variable-6
! Weather data:beam radiation on horitonzal ->Right axis variable-7
! Building: 14- TSI_S7 ->Right axis variable-8
! [unconnected] Right axis variable-9
56,1 26,3 109,1 26,5 DAYVENT
TEMPNIGHTVENT CONST 56,13 56,4 56,6
56,7 109,12 109,13 56,14 CONST
*** INITIAL INPUT VALUES
Tair_room Top_room Tamb Tamb_ trn Vent
Rate Vent Temp Tceil _in Tnorthinwall
QVENT_ROOM228 QHEAT_ROOM228 QCOOL_ROOM 228 TSI_S 7 QSENS_ROOM228
LABELS 3
Temperatures [deg C]
Energy demand [kJ]
Temperatures
*------------------------------------------------------------------------------
* Model "winter" (Type 14)
*
UNIT 13 TYPE 14
*$UNIT_NAME winter
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 1041 509
*$LAYER Main #
PARAMETERS 12
! 1 Initial value of time
! 2 Initial value of function
! 3 Time at point-1
! 4 Value at point -1
! 5 Time at point-2
! 6 Value at point -2
! 7 Time at point-3
! 8 Value at point -3
! 9 Time at point-4
! 10 Value at point -4
! 11 Time at point-5
! 12 Value at point -5
0.0000000000000000E+00 1.0000000000000000E+00 2.1600000000000000E+03 1.0000000000000000E+00 2.1600000000000000E+03
0.0000000000000000E+00 6.5520000000000000E+03 0.0000000000000000E+00 6.5520000000000000E+03 1.0000000000000000E+00
8.7600000000000000E+03 1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "MaytoSep" (Type 14)
*
UNIT 14 TYPE 14
*$UNIT_NAME MaytoSep
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 1002 50
*$LAYER Main #
PARAMETERS 12
! 1 Initial value of time
! 2 Initial value of function
! 3 Time at point-1
! 4 Value at point -1
! 5 Time at point-2
! 6 Value at point -2
! 7 Time at point-3
! 8 Value at point -3
! 9 Time at point-4
! 10 Value at point -4
! 11 Time at point-5
! 12 Value at point -5
0.0000000000000000E+00 0.0000000000000000E+00 2.8800000000000000E+03 0.0000000000000000E+00 2.8800000000000000E+03
1.0000000000000000E+00 6.5520000000000000E+03 1.0000000000000000E+00 6.5520000000000000E+03 0.0000000000000000E+00
8.7600000000000000E+03 0.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "Tcool"
*
EQUATIONS 3
summer = ge(time,2162)*lt(time,6552)
winter = 1-summer
Tcool = 35-9*(summer*[23,2]*[22,2]*nonholiday)
*$UNIT_NAME Tcool
*$LAYER Main
*$POSITION 839 434
*------------------------------------------------------------------------------
* Model "Type24" (Type 24)
*
UNIT 16 TYPE 24
*$UNIT_NAME Type24
*$MODEL .\Utility\Integrators\Quantity Integrator\Type24.tmf
*$POSITION 1033 719
*$LAYER Main #
PARAMETERS 2
! 1 Integration period
! 2 Relative or absolute start time
8.7600000000000000E+03 0.0000000000000000E+00
INPUTS 1
! Building: 3- QINF_ROOM228 ->Input to be integrated
56,3
*** INITIAL INPUT VALUES
0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type9e" (Type 9)
*
UNIT 17 TYPE 9
*$UNIT_NAME Type9e
*$MODEL .\Utility\Data Readers\Generic Data Files\Expert Mode\Free Format\Type9e.tmf
*$POSITION 371 829
*$LAYER Weather - Data Files #
PARAMETERS 54
! 1 Mode
! 2 Header Lines to Skip
! 3 No. of values to read
! 4 Time interval of data
! 5 Interpolate or not-1
! 6 Multiplication factor-1
! 7 Addition factor-1
! 8 Average or instantaneous value-1
! 9 Interpolate or not-2
! 10 Multiplication factor-2
! 11 Addition factor-2
! 12 Average or instantaneous value-2
! 13 Interpolate or not-3
! 14 Multiplication factor-3
! 15 Addition factor-3
! 16 Average or instantaneous value-3
! 17 Interpolate or not-4
! 18 Multiplication factor-4
! 19 Addition factor-4
! 20 Average or instantaneous value-4
! 21 Interpolate or not-5
! 22 Multiplication factor-5
! 23 Addition factor-5
! 24 Average or instantaneous value-5
! 25 Interpolate or not-6
! 26 Multiplication factor-6
! 27 Addition factor-6
! 28 Average or instantaneous value-6
! 29 Interpolate or not-7
! 30 Multiplication factor-7
! 31 Addition factor-7
! 32 Average or instantaneous value-7
! 33 Interpolate or not-8
! 34 Multiplication factor-8
! 35 Addition factor-8
! 36 Average or instantaneous value-8
! 37 Interpolate or not-9
! 38 Multiplication factor-9
! 39 Addition factor-9
! 40 Average or instantaneous value-9
! 41 Interpolate or not-10
! 42 Multiplication factor-10
! 43 Addition factor-10
! 44 Average or instantaneous value-10
! 45 Interpolate or not-11
! 46 Multiplication factor-11
! 47 Addition factor-11
! 48 Average or instantaneous value-11
! 49 Interpolate or not-12
! 50 Multiplication factor-12
! 51 Addition factor-12
! 52 Average or instantaneous value-12
! 53 Logical unit for input file
! 54 Free format mode
3.0000000000000000E+00 0.0000000000000000E+00 1.2000000000000000E+01 1.0000000000000000E+00 1.0000000000000000E+00
1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00
1.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 3.5000000000000000E+01 -1.0000000000000000E+00
*** External files
ASSIGN U:\Sim\FOS\weather\TRY\muenchen.yea 35
*|? Input file name |1000
*------------------------------------------------------------------------------
* Model "Temperature-2" (Type 65)
*
UNIT 18 TYPE 65
*$UNIT_NAME Temperature-2
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf
*$POSITION 279 850
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical unit for output file
! 11 Output file units
! 12 Output file delimiter
2.0000000000000000E+00 5.0000000000000000E+00 -1.6000000000000000E+01 1.0000000000000000E+02 0.0000000000000000E+00
1.0000000000000000E+03 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 7
! Type9e:Output 5 ->Left axis variable-1
! Type9e:Output 6 ->Left axis variable-2
! Type9e:Output 7 ->Right axis variable-1
! Type9e:Output 8 ->Right axis variable-2
! Equa-2:beam_h ->Right axis variable-3
! Equa-2:diffuse_h ->Right axis variable-4
! Equa-2:glo_hor ->Right axis variable-5
17,5 17,6 17,7 17,8 BEAM_H
DIFFUSE_H GLO_HOR
*** INITIAL INPUT VALUES
Tair_ambient RHamb IT_S IT_H beam
diffuse global
LABELS 3
Temperatures [deg C]
Energy demand [kJ]
Temperatures
*------------------------------------------------------------------------------
* EQUATIONS "Equa"
*
EQUATIONS 3
IT_hor = max(IT_horabs,0)
IT_South = 3.6*[17,7]
IT_horabs = [17,8]*3.6
*$UNIT_NAME Equa
*$LAYER Main
*$POSITION 496 829
*------------------------------------------------------------------------------
* EQUATIONS "Equa-2"
*
EQUATIONS 3
beam_h = [109,13]/3.6
diffuse_h = [109,14]/3.6
glo_hor = [109,12]/3.6
*$UNIT_NAME Equa-2
*$LAYER Main
*$POSITION 59 509
*------------------------------------------------------------------------------
* Model "Workdays" (Type 14)
*
UNIT 22 TYPE 14
*$UNIT_NAME Workdays
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 806 338
*$LAYER Main #
PARAMETERS 10
! 1 Initial value of time
! 2 Initial value of function
! 3 Time at point-1
! 4 Value at point -1
! 5 Time at point-2
! 6 Value at point -2
! 7 Time at point-3
! 8 Value at point -3
! 9 Time at point-4
! 10 Value at point -4
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.2000000000000000E+02
1.0000000000000000E+00 1.2000000000000000E+02 0.0000000000000000E+00 1.6800000000000000E+02 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "School Daytime" (Type 14)
*
UNIT 23 TYPE 14 Daytime
*$UNIT_NAME School Daytime
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 948 338
*$LAYER Main #
PARAMETERS 12
! 1 Initial value of time
! 2 Initial value of function
! 3 Time at point-1
! 4 Value at point -1
! 5 Time at point-2
! 6 Value at point -2
! 7 Time at point-3
! 8 Value at point -3
! 9 Time at point-4
! 10 Value at point -4
! 11 Time at point-5
! 12 Value at point -5
0.0000000000000000E+00 0.0000000000000000E+00 7.0000000000000000E+00 0.0000000000000000E+00 7.0000000000000000E+00
1.0000000000000000E+00 1.7000000000000000E+01 1.0000000000000000E+00 1.7000000000000000E+01 0.0000000000000000E+00
2.4000000000000000E+01 0.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "winter heating"
*
EQUATIONS 1
heating = [23,2]*[22,2]*[13,2]*nonholiday
*$UNIT_NAME winter heating
*$LAYER Main
*$POSITION 923 520
*------------------------------------------------------------------------------
* Model "Type91" (Type 91)
*
UNIT 26 TYPE 91
*$UNIT_NAME Type91
*$MODEL .\Heat Exchangers\Constant Effectiveness\Type91.tmf
*$POSITION 403 434
*$LAYER Main #
PARAMETERS 3
! 1 Heat exchanger effectiveness
! 2 Specific heat of hot side fluid
! 3 Specific heat of cold side fluid
8.0000000000000004E-01 1.0120000000000000E+00 1.0120000000000000E+00
INPUTS 4
! Building: 1- TAIR_ROOM228 ->Hot side inlet temperature
! [unconnected] Hot side flow rate
! Psychrometrics:Dry bulb temperature ->Cold side inlet temperature
! [unconnected] Cold side flow rate
56,1 CONST 331,7 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "Type65c" (Type 65)
*
UNIT 27 TYPE 65
*$UNIT_NAME Type65c
*$MODEL .\Output\Online Plotter\Online Plotter With File\No Units\Type65c.tmf
*$POSITION 940 744
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical Unit for output file
! 11 Output file units
! 12 Output file delimiter
6.0000000000000000E+00 1.0000000000000000E+01 -1.0000000000000000E+01 3.0000000000000000E+01 -5.0000000000000000E+03
5.0000000000000000E+03 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 3.6000000000000000E+01
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 16
! Building: 1- TAIR_ROOM228 ->Left axis variable-1
! Type91:Heat transfer rate ->Left axis variable-2
! Psychrometrics:Dry bulb temperature ->Left axis variable-3
! [unconnected] Left axis variable-4
! [unconnected] Left axis variable-5
! [unconnected] Left axis variable-6
! Building: 2- QSENS_ROOM228 ->Right axis variable-1
! Building: 3- QINF_ROOM228 ->Right axis variable-2
! Building: 4- QVENT_ROOM228 ->Right axis variable-3
! Building: 6- QHEAT_ROOM228 ->Right axis variable-4
! Building: 7- QCOOL_ROOM228 ->Right axis variable-5
! [unconnected] Right axis variable-6
! [unconnected] Right axis variable-7
! [unconnected] Right axis variable-8
! [unconnected] Right axis variable-9
! [unconnected] Right axis variable-10
56,1 26,5 331,7 CONST CONST
CONST 56,2 56,3 56,4 56,6
56,7 CONST CONST CONST CONST
CONST
*** INITIAL INPUT VALUES
Tair_room Top_room Tamb Tamb_ trn label
label QSENS Qinf Qvent Qheat
Qcool total beam label label
label
LABELS 3
Temperatures [deg C]
Energy demand [kJ]
Graph 1
*** External files
ASSIGN V:\Gr_Biomasse\Pr_Laufend\102239_FOSBOS_2009\8 Wang\program\TRNSYS\ReferenceTceilingasWinter_holiday_heat recovery cold Tout_May23rd2014\BuildingProject12.plt 36
*|? What file should the online print to? |1000
*------------------------------------------------------------------------------
* Model "holidays1" (Type 14)
*
UNIT 28 TYPE 14
*$UNIT_NAME holidays1
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 1060 242
*$LAYER Main #
PARAMETERS 34
! 1 Initial value of time
! 2 Initial value of function
! 3 Time at point-1
! 4 Value at point -1
! 5 Time at point-2
! 6 Value at point -2
! 7 Time at point-3
! 8 Value at point -3
! 9 Time at point-4
! 10 Value at point -4
! 11 Time at point-5
! 12 Value at point -5
! 13 Time at point-6
! 14 Value at point -6
! 15 Time at point-7
! 16 Value at point -7
! 17 Time at point-8
! 18 Value at point -8
! 19 Time at point-9
! 20 Value at point -9
! 21 Time at point-10
! 22 Value at point -10
! 23 Time at point-11
! 24 Value at point -11
! 25 Time at point-12
! 26 Value at point -12
! 27 Time at point-13
! 28 Value at point -13
! 29 Time at point-14
! 30 Value at point -14
! 31 Time at point-15
! 32 Value at point -15
! 33 Time at point-16
! 34 Value at point -16
0.0000000000000000E+00 1.0000000000000000E+00 1.6800000000000000E+02 1.0000000000000000E+00 1.6800000000000000E+02
0.0000000000000000E+00 1.5130000000000000E+03 0.0000000000000000E+00 1.5130000000000000E+03 1.0000000000000000E+00
1.6800000000000000E+03 1.0000000000000000E+00 1.6800000000000000E+03 0.0000000000000000E+00 2.5440000000000000E+03
0.0000000000000000E+00 2.5440000000000000E+03 1.0000000000000000E+00 2.8800000000000000E+03 1.0000000000000000E+00
2.8800000000000000E+03 0.0000000000000000E+00 3.9360000000000000E+03 0.0000000000000000E+00 3.9360000000000000E+03
1.0000000000000000E+00 3.9360000000000000E+03 1.0000000000000000E+00 4.2480000000000000E+03 1.0000000000000000E+00
4.2480000000000000E+03 0.0000000000000000E+00 8.7600000000000000E+03 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "holidays2" (Type 14)
*
UNIT 29 TYPE 14
*$UNIT_NAME holidays2
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 1145 242
*$LAYER Main #
PARAMETERS 26
! 1 Initial value of time
! 2 Initial value of function
! 3 Time at point-1
! 4 Value at point -1
! 5 Time at point-2
! 6 Value at point -2
! 7 Time at point-3
! 8 Value at point -3
! 9 Time at point-4
! 10 Value at point -4
! 11 Time at point-5
! 12 Value at point -5
! 13 Time at point-6
! 14 Value at point -6
! 15 Time at point-7
! 16 Value at point -7
! 17 Time at point-8
! 18 Value at point -8
! 19 Time at point-9
! 20 Value at point -9
! 21 Time at point-10
! 22 Value at point -10
! 23 Time at point-11
! 24 Value at point -11
! 25 Time at point-12
! 26 Value at point -12
0.0000000000000000E+00 0.0000000000000000E+00 5.0400000000000000E+03 0.0000000000000000E+00 5.0400000000000000E+03
1.0000000000000000E+00 6.1200000000000000E+03 1.0000000000000000E+00 6.1200000000000000E+03 0.0000000000000000E+00
7.2240000000000000E+03 0.0000000000000000E+00 7.2240000000000000E+03 1.0000000000000000E+00 7.4400000000000000E+03
1.0000000000000000E+00 7.4400000000000000E+03 0.0000000000000000E+00 8.5680000000000000E+03 0.0000000000000000E+00
8.5680000000000000E+03 1.0000000000000000E+00 8.7600000000000000E+03 1.0000000000000000E+00 8.7600000000000000E+03
0.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "non holiday"
*
EQUATIONS 1
nonholiday = 1-([29,1]+[28,1])
*$UNIT_NAME non holiday
*$LAYER Main
*$POSITION 1112 337
*------------------------------------------------------------------------------
* Model "Day Occupancy" (Type 14)
*
UNIT 31 TYPE 14 Occupancy
*$UNIT_NAME Day Occupancy
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 896 40
*$LAYER Main #
PARAMETERS 36
! 1 Initial value of time
! 2 Initial value of function
! 3 Time at point-1
! 4 Value at point -1
! 5 Time at point-2
! 6 Value at point -2
! 7 Time at point-3
! 8 Value at point -3
! 9 Time at point-4
! 10 Value at point -4
! 11 Time at point-5
! 12 Value at point -5
! 13 Time at point-6
! 14 Value at point -6
! 15 Time at point-7
! 16 Value at point -7
! 17 Time at point-8
! 18 Value at point -8
! 19 Time at point-9
! 20 Value at point -9
! 21 Time at point-10
! 22 Value at point -10
! 23 Time at point-11
! 24 Value at point -11
! 25 Time at point-12
! 26 Value at point -12
! 27 Time at point-13
! 28 Value at point -13
! 29 Time at point-14
! 30 Value at point -14
! 31 Time at point-15
! 32 Value at point -15
! 33 Time at point-16
! 34 Value at point -16
! 35 Time at point-17
! 36 Value at point -17
0.0000000000000000E+00 0.0000000000000000E+00 8.0000000000000000E+00 0.0000000000000000E+00 8.0000000000000000E+00
1.0000000000000000E+00 9.5000000000000000E+00 1.0000000000000000E+00 9.5000000000000000E+00 0.0000000000000000E+00
9.7500000000000000E+00 0.0000000000000000E+00 9.7500000000000000E+00 1.0000000000000000E+00 1.1250000000000000E+01
1.0000000000000000E+00 1.1250000000000000E+01 0.0000000000000000E+00 1.1500000000000000E+01 0.0000000000000000E+00
1.1500000000000000E+01 1.0000000000000000E+00 1.3000000000000000E+01 1.0000000000000000E+00 1.3000000000000000E+01
0.0000000000000000E+00 1.3750000000000000E+01 0.0000000000000000E+00 1.3750000000000000E+01 1.0000000000000000E+00
1.6000000000000000E+01 1.0000000000000000E+00 1.6000000000000000E+01 0.0000000000000000E+00 2.4000000000000000E+01
0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Workdays-2" (Type 14)
*
UNIT 32 TYPE 14
*$UNIT_NAME Workdays-2
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 800 40
*$LAYER Main #
PARAMETERS 10
! 1 Initial value of time
! 2 Initial value of function
! 3 Time at point-1
! 4 Value at point -1
! 5 Time at point-2
! 6 Value at point -2
! 7 Time at point-3
! 8 Value at point -3
! 9 Time at point-4
! 10 Value at point -4
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.2000000000000000E+02
1.0000000000000000E+00 1.2000000000000000E+02 0.0000000000000000E+00 1.6800000000000000E+02 0.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "Occupancy"
*
EQUATIONS 1
occupancy = [32,1]*[31,1]
*$UNIT_NAME Occupancy
*$LAYER Main
*$POSITION 862 189
*------------------------------------------------------------------------------
* EQUATIONS "Vent Rate"
*
EQUATIONS 2
dayvent = (2.75*occupancy)*[36,1]*[23,1]*nonholiday+1.3*[37,1]*[14,1]
winterdayvent = (2.38*occupancy+0.37)*[36,1]*[23,1]*nonholiday*(1-[14,1])
*$UNIT_NAME Vent Rate
*$LAYER Main
*$POSITION 961 221
*------------------------------------------------------------------------------
* EQUATIONS "People Occupancy"
*
EQUATIONS 1
peopleoccupancy = occupancy*nonholiday
*$UNIT_NAME People Occupancy
*$LAYER Main
*$POSITION 785 210
*------------------------------------------------------------------------------
* Model "Workdays-3" (Type 14)
*
UNIT 36 TYPE 14
*$UNIT_NAME Workdays-3
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 1056 82
*$LAYER Main #
PARAMETERS 10
! 1 Initial value of time
! 2 Initial value of function
! 3 Time at point-1
! 4 Value at point -1
! 5 Time at point-2
! 6 Value at point -2
! 7 Time at point-3
! 8 Value at point -3
! 9 Time at point-4
! 10 Value at point -4
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 1.0000000000000000E+00 1.2000000000000000E+02
1.0000000000000000E+00 1.2000000000000000E+02 0.0000000000000000E+00 1.6800000000000000E+02 0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Night Vent" (Type 14)
*
UNIT 37 TYPE 14 Vent
*$UNIT_NAME Night Vent
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 1116 82
*$LAYER Main #
PARAMETERS 12
! 1 Initial value of time
! 2 Initial value of function
! 3 Time at point-1
! 4 Value at point -1
! 5 Time at point-2
! 6 Value at point -2
! 7 Time at point-3
! 8 Value at point -3
! 9 Time at point-4
! 10 Value at point -4
! 11 Time at point-5
! 12 Value at point -5
0.0000000000000000E+00 1.0000000000000000E+00 6.5000000000000000E+00 1.0000000000000000E+00 6.5000000000000000E+00
0.0000000000000000E+00 2.3000000000000000E+01 0.0000000000000000E+00 2.3000000000000000E+01 1.0000000000000000E+00
2.4000000000000000E+01 1.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "Vent Temp"
*
EQUATIONS 2
tempnightvent = Tvent*[13,1]*[23,1]*[32,1]*nonholiday+19*(1-[13,1])*[23,1]*[32,1]*nonholiday+[331,7]*[14,1]*[37,1]
Tvent = 19
*$UNIT_NAME Vent Temp
*$LAYER Main
*$POSITION 580 61
*------------------------------------------------------------------------------
* EQUATIONS "Qairconditioning"
*
EQUATIONS 1
Qairconditioning = winterdayvent
*$UNIT_NAME Qairconditioning
*$LAYER Main
*$POSITION 1155 424
*------------------------------------------------------------------------------
* Model "sum " (Type 28)
*
UNIT 41 TYPE 28
*$UNIT_NAME sum
*$MODEL .\Output\Simulation Summary\Results to External File\Without Energy Balance\Type28b.tmf
*$POSITION 1136 840
*$LAYER Main #
PARAMETERS 25
! 1 Summary interval
! 2 Summary start time
! 3 Summary stop time
! 4 Logical unit for the output file
! 5 Output mode
! 6 Operation code-1
! 7 Operation code-2
! 8 Operation code-3
! 9 Operation code-4
! 10 Operation code-5
! 11 Operation code-6
! 12 Operation code-7
! 13 Operation code-8
! 14 Operation code-9
! 15 Operation code-10
! 16 Operation code-11
! 17 Operation code-12
! 18 Operation code-13
! 19 Operation code-14
! 20 Operation code-15
! 21 Operation code-16
! 22 Operation code-17
! 23 Operation code-18
! 24 Operation code-19
! 25 Operation code-20
7.3000000000000000E+02 0.0000000000000000E+00 8.7600000000000000E+03 3.4300000000000000E+02 1.0000000000000000E+00
-1.1000000000000000E+01 -4.0000000000000000E+00 -1.2000000000000000E+01 -4.0000000000000000E+00 -1.3000000000000000E+01
-4.0000000000000000E+00 -1.4000000000000000E+01 -4.0000000000000000E+00 -1.5000000000000000E+01 -4.0000000000000000E+00
-1.6000000000000000E+01 -4.0000000000000000E+00 -1.7000000000000000E+01 -4.0000000000000000E+00 -1.8000000000000000E+01
-4.0000000000000000E+00 -1.9000000000000000E+01 -4.0000000000000000E+00 -2.0000000000000000E+01 -4.0000000000000000E+00
INPUTS 10
! Building: 23- DQAIR_ROOM228 ->Summary input-1
! Building: 24- QINF_ROOM228_#2 ->Summary input-2
! Building: 25- QVENT_ROOM228_#2 ->Summary input-3
! Building: 26- QHEAT_ROOM228_#2 ->Summary input-4
! Building: 27- QCOOL_ROOM228_#2 ->Summary input-5
! Building: 28- QLATG_ROOM228 ->Summary input-6
! Building: 29- QGCONV_ROOM228 ->Summary input-7
! Building: 30- QGRAD_ROOM228 ->Summary input-8
! Building: 31- QTWG_ROOM228 ->Summary input-9
! Building: 32- QTSABS_ROOM228 ->Summary input-10
56,23 56,24 56,25 56,26 56,27
56,28 56,29 56,30 56,31 56,32
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
LABELS 10
DQAIR
QINF
QVENT
QHEAT
QCOOL
QLATG
QGCONV
QGRAD
QTWG
QTSABS
*** External files
ASSIGN sum.sum 343
*|? File for the summary results |1000
*------------------------------------------------------------------------------
* Model "MarchtoNov" (Type 14)
*
UNIT 40 TYPE 14
*$UNIT_NAME MarchtoNov
*$MODEL .\Utility\Forcing Functions\General\Type14h.tmf
*$POSITION 559 797
*$LAYER Main #
PARAMETERS 12
! 1 Initial value of time
! 2 Initial value of function
! 3 Time at point-1
! 4 Value at point -1
! 5 Time at point-2
! 6 Value at point -2
! 7 Time at point-3
! 8 Value at point -3
! 9 Time at point-4
! 10 Value at point -4
! 11 Time at point-5
! 12 Value at point -5
0.0000000000000000E+00 0.0000000000000000E+00 1.4160000000000000E+03 0.0000000000000000E+00 1.4160000000000000E+03
1.0000000000000000E+00 8.0160000000000000E+03 1.0000000000000000E+00 8.0160000000000000E+03 0.0000000000000000E+00
8.7600000000000000E+03 0.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "S_South"
*
EQUATIONS 1
Shading_South = summerday*S_SOUTH
*$UNIT_NAME S_South
*$LAYER Main
*$POSITION 737 797
*------------------------------------------------------------------------------
* EQUATIONS "SummerDay"
*
EQUATIONS 1
summerday = lt(23,[44,2])
*$UNIT_NAME SummerDay
*$LAYER Main
*$POSITION 600 904
*------------------------------------------------------------------------------
* Model "Type93" (Type 93)
*
UNIT 44 TYPE 93
*$UNIT_NAME Type93
*$MODEL .\Utility\Input Value Recall\Type93.tmf
*$POSITION 777 910
*$LAYER Main #
PARAMETERS 2
! 1 Number of inputs to be stored
! 2 Number of timesteps to be stored
1.0000000000000000E+00 2.0000000000000000E+00
INPUTS 2
! Building: 14- TSI_S7 ->Input value
! [unconnected] Noname
56,14 CONST
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00
*------------------------------------------------------------------------------
END
TRANSIENT SIMULATION STARTING AT TIME = 0.0000000000000000E+00
STOPPING AT TIME = 8.7600000000000000E+03
TIMESTEP = 1 / 10
DIFFERENTIAL EQUATION ERROR TOLERANCE = 1.0000000000000002E-03
ALGEBRAIC CONVERGENCE TOLERANCE = 1.0000000000000002E-03
DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from TRNDll.dll: Type14, Type24, Type9, Type65, Type91, Type28, Type93, Type56, Type69, Type109, Type2, Type33
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "Type157_demo_debug.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type200.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type280.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type340.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "type370.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 199 : TRNSYS found at least one user DLL in the UserLib directory. (Note: Only DLL's including Types that are used in the simulation are loaded)
Reported information : 0 user DLLs were loaded after searching in "C:\Programme\TRNSYS16_1\UserLib\DebugDLLs"
*** Notice at time : 0.000000
Generated by Unit : 56
Generated by Type : 56
Message : TRNFLOW multi zone air flow model integrated
*** Notice at time : 0.000000
Generated by Unit : 56
Generated by Type : 56
Message : Active layers and internal window calculations integrated
*** Notice at time : 0.000000
Generated by Unit : 56
Generated by Type : 56
Message : Star network calculation: every iteration step of TRNSYS
*** Fatal Error at time : 0.000000
Generated by Unit : 44
Generated by Type : 93
TRNSYS Message 103 : The TRNSYS TYPE checking routine has found an inconsistency in the specified component between the input file and the information expected by the Type
Reported information : An illegal number of INPUTS has been specified for this component. Please check the component configuration. 1 INPUTS are required and 2 were specified.
==========================================================================================
TYPE109 TIME REPORT: (for debugging purpose)
------------------------------------------------------------------------------------------
time_report_unit: 6
time_filter: .8760E+07 [ms]
==========================================================================================
Level0 Level1 Level2 Level3 Level4 Counter DTime[ms] TTime[ms]
==========================================================================================
zwischenzeit 1 : 0.000000000000000E+000
zwischenzeit 2 : 0.000000000000000E+000
zwischenzeit 3 : 0.000000000000000E+000
zwischenzeit 4 : 0.000000000000000E+000
zwischenzeit 5 : 0.000000000000000E+000
zwischenzeit 6 : 0.000000000000000E+000
zwischenzeit 7 : 0.000000000000000E+000
zwischenzeit 8 : 0.000000000000000E+000
zwischenzeit 9 : 0.000000000000000E+000
zwischenzeit 10 : 0.000000000000000E+000
itest : 0
Summe : 0.000000000000000E+000
==========================================================================================
TYPE56 TIME REPORT: (for debugging purpose)
------------------------------------------------------------------------------------------
time_report_unit: 6
time_filter: .8760E+07 [ms]
==========================================================================================
Level0 Level1 Level2 Level3 Level4 Counter DTime[ms] TTime[ms]
==========================================================================================
*********************************************************************************************************
The Following UNIT Numbers, TYPE Numbers, and Logical Units Were Used in the Supplied TRNSYS Input File:
13 2 4
14 9 6
16 14 9
17 24 30
18 28 31
22 33 32
23 56 33
25 65 34
26 69 35
27 91 36
28 93 343
29 109 344
31 345
32 346
36 347
37 348
40 349
41 350
44 351
56 352
69 353
109
200
202
331
*********************************************************************************************************
Total TRNSYS Calculation Time: 5.5900 Seconds