[TRNSYS-users] Data generated using TRNSYS

[David BRADLEY]

Metkell,
   The plotter (Type65) is just plotting the outputs of other components 
that are being passed to it as its inputs. If you want to have a file 
written out at the end of your simulation containing the values that 
were plotted then you can either use a printer component such as Type25 
or you can replace the Type65 with the version of Type65 that 
automatically creates an output file containing the plotted numbers 
(Type65c)
David



On 3/28/2014 08:55, metkell yebiyo wrote:
> Dear TRNSYS users,
>
> Does anyone know how to get hold of the raw data generated by TRNSYS. 
> Say you have a model of GSHP, once you run the model it will generate 
> COP, flow and return temperatures etc. Now how would you get hold of 
> or transfer the raw data you are seeing on the graph please?
>
>
>
> Regards,
> Metkel
>
> Metkel Yebiyo BEng (Hons), MSc
> CEREB PhD Researcher - Ground Source Heat Pumps
> Room T615
> Department of Urban Engineering
> Faculty of Engineering, Science and the Built Environment
> London South Bank University,
> 103 Borough Road,
> London SE1 0AA
> Tel: +44 (0)20 7815 7639
> E: yebiyom at lsbu.ac.uk <mailto:yebiyom at lsbu.ac.uk>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140328/730f26a1/attachment-0004.htm>