[TRNSYS-users] Data generated using TRNSYS

metkell yebiyo metkell at yahoo.com
Fri Mar 28 06:55:50 PDT 2014


Dear TRNSYS users,

Does anyone know how to get hold of the raw data generated by TRNSYS. Say you have a model of GSHP, once you run the model it will generate COP, flow and return temperatures etc. Now how would you get hold of or transfer the raw data you are seeing on the graph please?



Regards,
Metkel

Metkel Yebiyo BEng (Hons), MSc
CEREB PhD Researcher - Ground Source Heat Pumps 
Room T615 
Department of Urban Engineering 
Faculty of Engineering, Science and the Built Environment
London South Bank University, 
103 Borough Road,
London SE1 0AA
Tel: +44 (0)20 7815 7639
E: yebiyom at lsbu.ac.uk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140328/59c78489/attachment-0004.htm>


More information about the TRNSYS-users mailing list