[TRNSYS-users] Adjacent surfaces not recognized with 3d plugin
Alexandre J. Freire
ajfreire at fe.up.pt
Mon Jun 30 08:32:14 PDT 2014
Dear users,
Id like to know how to solve the following issue:
For some reason many adjacent walls are not recognized when loading the idf
file in the trnsys wizard. Ive seen the surfaces where the error Adjacent
wall not found appears and I checked:
- Object info recognizes the wall as adjacent and boundary zone is
correct
- On the matching surface recognition is OK as well
- Areas are equal
- Vertices are coincident
- The idf is written as described in the sketchup interface.
- The b17 file is the only where in those surfaces dont appear
something like : ADJ_SURF=63 : BACK
Not all adjacent surfaces had this problem but many do (62).
Could someone tell me how to make those walls getting recognized in trnsys?
Many thanks in advance,
Alexandre J. Freire
Investigador Científico / Research Engineer
Faculdade de Engenharia da Universidade do Porto
Departamento de Engenharia Mecânica
Secção de Fluidos e Calor
Rua Dr. Roberto Frias, Edif. L403
4200-465 Porto - Portugal
Tlf: +351 22 508 2264
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140630/ddc80ee5/attachment-0002.htm>
More information about the TRNSYS-users
mailing list