[TRNSYS-users] TRNSYS storage heater

David BRADLEY d.bradley at tess-inc.com
Mon Jul 7 10:19:32 PDT 2014


Mark,
   There is a "lumped capacitance" model (Type963) in the TESS Loads and 
Structures Library (a TRNSYS add-on) that might suit as a model of a 
storage heater.
Kind regards,
  David


On 7/4/2014 04:03, Azzopardi, Mark wrote:
> Hi,
>
> Is anyone aware of a way to model a storage heater as a source of heat 
> input into a building model?
> I am very new to using TRNSYS but a standard heating model (type 121) 
> I think can be used to model its output but fails to capture the 
> storage element. I want to be able to analyse the input power to the 
> storage heater also but in the correct time frame which obviously 
> without the storage element to the heater any input power would be 
> instantaneous with the heaters output.
> Hopefully my question is clear and I would appreciate any help.
>
> Thank you & best regards.
> *Mark Azzopardi*
> _mark.azzopardi at aecom.com_ <mailto:Andrew.Phinn at aecom.com>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140707/0cf2517e/attachment-0002.htm>


More information about the TRNSYS-users mailing list