[TRNSYS-users] error gentrn.dll

[David BRADLEY]

Sihem,
   You might try opening TRNBuild directly 
(..\Trnsys17\Building\TRNBuild.exe) and then select "Open" from the 
"File" menu and find the *.b17 file used by your project. Simply resave 
the *.b17 file with the newer version of TRNBuild, then try the 
simulation again.
Kind regards,
  David


On 1/30/2014 10:37, TASCA-GUERNOUTI Sihem - CEREMA/DTerOuest/DVT/BATEN 
wrote:
> Dear TRNSYS-Users,
> I got a building model that was created with the trnsys17-00-0019 
> release. I simulate this building with 17-01-0025 release. I have the 
> following error message:
> "Wrong version of gentrn.dll was used. TYPE 56 expects version 
> 189.000, but TRNBuild used gentrn.dll version 162.000was loaded."
>  Does someone know how to fix this problem?
> Thank you in advance for your answer!
> Sihem
>
>
> Le 16/01/2014 19:08, TASCA-GUERNOUTI Sihem - 
> CEREMA/DTerOuest/DVT/BATEN a écrit :
>> Hi,
>> Thanks for answers. Just to understand the process, I tested with a 
>> simple example:
>>
>>     * 1 zone in the Type 56, I changed   the input type for occupant 
>> internal gains  to "Input "
>>     * in type 155:
>>           o  I read a fictive daily schedule which represents the 
>> number of present per hour (attached file: profil.txt), then I did a 
>> loop: for i=1:24 { trnoutputs(i)=y(i) } (I put "calling mode = 10")
>>     * In simulation studio I connect the output from Type 155 to the 
>> input for Type 56.
>> * I print the type 155 outputs (attached file: Type25a.txt).The file 
>> contains 24 values equal to 1 (the first is 0). These values does not 
>> match to the given schedule.
>> Could you help me to understand this result?
>> Thanks,
>> Sihem
>> PS: As a reminder, I use stochastic models, in matlab to calculate 
>> the annual states of occupants/hour. I need to use this output as an 
>> input in trnsys for occupancy gains calculation.
>>
>>
>>
>>
>> Le 10/01/2014 18:20, "> Adam Rysanek (par Internet, dépôt 
>> trnsys-users-bounces at cae.wisc.edu)" a écrit :
>>> Dear Sihem,
>>>
>>> I have had the exact same scenario in the past (stochastic occupancy 
>>> from Type 155 for simulation in Type 56).
>>>
>>> Step 1: In TRNBUILD, for each building zone (or for all zones), you 
>>> change the input type for occupant internal gains from "Constant" or 
>>> "Schedule" to "Input". This assigns a new input variable to the Type 
>>> 56 component in TRNSYS.
>>> Step 2: In Simulation Studio, connect the corresponding output from 
>>> Type 155 to the new input you created for Type 56.
>>> Step 3: Repeat for all other required zones.
>>>
>>> As I wrote this, I just saw David Bradley's response, which is helpful.
>>> Regards,
>>> Adam
>>>
>>> ------
>>>
>>> Adam Rysanek, BASc, MScE, PhD
>>> Research Associate
>>>
>>> Energy Efficient Cities initiative | EECi
>>> Department of Engineering
>>> Trumpington Street
>>> University of Cambridge
>>> Cambridge CB2 1PZ
>>> United Kingdom
>>>
>>> Mobile: +44 750 332 3100
>>> Office: +44 1223 766 968
>>> E-mail: amr63 at cam.ac.uk
>>>
>>>
>>> From: TASCA-GUERNOUTI Sihem - CEREMA/DTerOuest/DVT/BATEN 
>>> <Sihem.Tasca-guernouti at developpement-durable.gouv.fr 
>>> <mailto:Sihem.Tasca-guernouti at developpement-durable.gouv.fr>>
>>> Organization: CEREMA/DTerOuest/DVT/BATEN
>>> Reply-To: "TRNSYS users mailing list at the Solar Energy Lab, 
>>> UW-Madison" <trnsys-users at cae.wisc.edu 
>>> <mailto:trnsys-users at cae.wisc.edu>>
>>> Date: Fri, 10 Jan 2014 18:00:16 +0100
>>> To: <trnsys-users at cae.wisc.edu <mailto:trnsys-users at cae.wisc.edu>>
>>> Subject: [TRNSYS-users] Type 155-yearly schedules
>>>
>>> Hi,
>>> I'm modelling a building using type 56 and the occupancy schedule 
>>> with matlab (stochastic model for occupancy). The occupancy vary 
>>> through the year for each zone and each occupant.
>>> I get the number of occupants per zone from TRNSYS to calculate the 
>>> probabilities of presencein Type 155. The yearly  occupancy schedule 
>>> (8760 values) is an output of Type 155. Is there any way for 
>>> including this schedule in Trsnys as an input?
>>> Thanks for any advice you can give.
>>> Best regards
>>> Sihem
>>> -- 
>>>
>>> _______________________________________________ TRNSYS-users mailing 
>>> list TRNSYS-users at cae.wisc.edu <mailto:TRNSYS-users at cae.wisc.edu> 
>>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>>
>>>
>>> _______________________________________________
>>> TRNSYS-users mailing list
>>> TRNSYS-users at cae.wisc.edu
>>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20140203/a1f07284/attachment-0004.htm>