[TRNSYS-users] Radiant floor with Trnsys 3D

[David BRADLEY]

Rémi,
   I am not sure that I entirely understand your configuration. I would 
have approached this as a single zone (not three adjacent zones) having 
its floor cut up into three parts. Each floor will be imported into 
TRNBuild individually and can then be treated as separate radiant floors.
Kind regards,
  David


On 11/12/2013 07:18, Rémi Marconot wrote:
>
> Hello Trnsys users,
>
> By using Trnsys 3D with Google Sketchup, I would like to simulate a 
> 3 radiant floors system for a 800m² room. That is why I have created 
> with Google Sketchup, 3 adjacent zones which make the entire floor in 
> order to have 3 different active layers in TrnBuild. However when I am 
> running the simulation, an error says that  "adjacent wall not found".
>
> How can I solve this problem or is there another solution to create 
> several active layers in a same surface to divide my radiant floor ?
>
> Thank you for any kind of help in advance.
>
> Rémi
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131115/d60d48f1/attachment-0004.htm>