[TRNSYS-users] help in Tansys3d and sketchup

[David BRADLEY]

Shahen,
   Just to be entirely clear, the steps you should follow at that point are:

1. open TRNBuild
2. select File: Import Trnsys3D file...
3. click the arrow button in the field in the upper left of the window 
and browse to find untitled.idf (click ok)
4. click the radio button at the right hand side of the window to 
indicate whether the building is in the northern or southern hemisphere.
5. click the button next to "import"

when I try your file, I am able to import it. If you aren't, I would 
recommend that you look at the permissions on your \Trnsys17 directory 
and make sure that you have administrator level access to the entire 
directory. I wonder if there is a DLL being called that won't run due to 
a file permissions problem.
Kind regards,
  David




On 11/11/2013 09:53, Shahen Fakhraldin wrote:
> Dear Ciarán and Muhammud,
> Thanks for quick response,
> Ciarán I did exactly what did you do, but after "Open IDF & Create 
> project !"  nothing happening!
> by the way I am using Window 8(32bit)
> Regards,
> Shahen
> /
>
> /
>
>
> On Monday, November 11, 2013 3:41 PM, Flynn Ciaran 
> <ciaran.flynn at aalto.fi> wrote:
> Maybe one thing: did you import the idf file by going to:
> File > New > 3D Building Project (multizone) > Next > Next > "Open IDF 
> & Create project !" ?
> (that's what I did to get your file up and running...)
> Regards,
> Ciarán
> *From:*trnsys-users-bounces at cae.wisc.edu 
> [mailto:trnsys-users-bounces at cae.wisc.edu] *On Behalf Of *Shahen 
> Fakhraldin
> *Sent:* 11. marraskuuta 2013 17:08
> *To:* trnsys-users at cae.wisc.edu
> *Subject:* [TRNSYS-users] help in Tansys3d and sketchup
> Hi all,
> As a beginner to TRNSYS, I'm trying to understand how can I draw a 3d 
> produce a multizone building by following the tutorial "t3d.pdf". 
> However, at the end when I tried to import the IDF file in the 
> simulation studio nothing generated and I'm not getting the automatic 
> generated project. I repeated the process many times, even with 
> onezone (just the first floor), but no results. What I'm doing wrong?
> I would be grateful for any help and you can find the IDF file in the 
> attachment
> (I am using TRNSYS17 with Sketchup 8 pro)
> Shahen Fakhraldin
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131111/212c104e/attachment-0001.htm>