[TRNSYS-users] hybrid pv/wind syteme

[David BRADLEY]

Mr. Mounir,
   There is not really enough information in the picture to determine 
whether or not you have connected the components correctly. I would 
recommend that you contact your distributor for assistance.
Regards,
  David

PS one hint that I can give you is that you do not need to use two 
instances of Type109; you can send the outputs of a single Type109 to as 
many components as you need.

On 5/3/2013 12:18, ihab mounir wrote:
> dear all
> I never use trnsys and I want to simulate a hybrid pv/wind systeme to 
> power a residential house with electricity .
> i put in the simulink studio the components wich attached in the 
> picture above (take a look  at the attached picture)
> I know that this is not correct , I need your help to put the correct 
> components and get the correct linked beetween the components
>
> thank you all
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130506/36838f62/attachment-0004.htm>