[TRNSYS-users] Flowrate Control

[Amani ZRIBA]

Dear TRNSYS users, 
In my model ( a solar wood dryer) , i have a diverter connected to a heat exchanger water/air.
I want to control the flowrate at outlet 1 of the diverter to maintain the heat exchanger cold-side temperature at a desired value. I tried with the PID controller but the problem lies in the components connections.
Please help me through this problem.  Best regards. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130628/629ea26d/attachment-0004.htm>