[TRNSYS-users] SIMULINK function for TRNSYS
saleh saadi
salehsnjsaadi404 at yahoo.com
Tue Jan 29 13:34:28 PST 2013
Dear Users,
I wanted to share my experience so far.
I have been able to create types in SIMULINK, build and compile and use them in TRNSYS.
All thanks goes to the P. Riederer, W. Keilholz, V. Ducreux who wrote a paper titled "COUPLING OF TRNSYS WITH SIMULINK – A METHOD TO AUTOMATICALLY EXPORT AND USE TRNSYS MODELS WITHIN SIMULINK AND VICE VERSA".
If any decides to go through this route, then let me know if help is needed.
thanks,
Saleh
________________________________
From: saleh saadi <salehsnjsaadi404 at yahoo.com>
To: "trnsys-users at cae.wisc.edu" <trnsys-users at cae.wisc.edu>
Sent: Friday, December 14, 2012 6:04 PM
Subject: Re: SIMULINK function for TRNSYS
No one has worked on this yet to offer advice!!!.
thanks,
Saleh
________________________________
From: saleh saadi <salehsnjsaadi404 at yahoo.com>
To: "trnsys-users at cae.wisc.edu" <trnsys-users at cae.wisc.edu>
Sent: Monday, December 10, 2012 9:11 PM
Subject: SIMULINK function for TRNSYS
TRNSYS Users,
I have developed some models in SIMULINK and planing to use some types in TRNSYS 16.
I tried using TYPE155 for the co-simulation between SIMULINK and TRNSYS via MATLAB but I found it so slow. I found an article written back in 2009 about the possibility of linking the SIMULINK models with TRNSYS TYPEs using some S functions directly without using TYPE155. Is there a way to get access to this or an example?
Your help is appreciated.
regards,
Saleh AL Saadi
PhD Student
University of Colorado Boulder
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130129/587e03a5/attachment-0001.htm>
More information about the TRNSYS-users
mailing list