[TRNSYS-users] Example "SDHW" - how to set max. "temperature to load"?

[Pavel Adam]

Hello,

I am trying the example "SDHW" and I do not understand how the divertor
(type 11) works.

I would expect that when the "set point temperature" is set at 45°C, then
the "outlet temperature" from the "tee piece" should be max. 45°C. But it
is not so ... the temperature reaches to the 80 °C.

Can you help me, please? How can I set max. temperature on the outlet from
the "tank" ("temperature to load").

Thank you very much.

Best regards
Pavel Adam
Brno University of Technology
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130213/a412ccf6/attachment-0005.htm>