[TRNSYS-users] Fwd: Type 28

王洋 wanghongyang1767 at gmail.com
Mon Dec 9 03:28:11 PST 2013 

Dear all,

Good Day!

I met an error when I used Type 28 as follows.

*** Fatal Error at time   :         0.100000
    Generated by Unit     :    40
    Generated by Type     :    28
    TRNSYS Message    439 : One of the output numbers specified on the
CHECK statement for this unit is beyond the maximum number of outputs
specified by this model.
    Reported information  : Not available

Please see the attached deck file of this program.

Who had some experiences to deal with this problem?

Many thanks in advance!
Br.

yang wang



2013/12/5 <trnsys-users-request at cae.wisc.edu>

> Send TRNSYS-users mailing list submissions to
>         trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>         trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>         trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>    1. Re: Workspace for TESS libraries (David BRADLEY)
>    2. Re: Workspace for TESS libraries (David BRADLEY)
>    3. Re: doors in sketchup /TRNbuild (David BRADLEY)
>    4. Re: CHILLER PERFORMANCE DATA (Jeremy Osborne)
>
>
> ---------- 已转发邮件 ----------
> From: David BRADLEY <d.bradley at tess-inc.com>
> To: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <
> trnsys-users at cae.wisc.edu>, Trnsys discussion group <
> trnsys-users at engr.wisc.edu>, "a8304506 at graduate.hku.hk" <
> a8304506 at graduate.hku.hk>
> Cc:
> Date: Wed, 04 Dec 2013 16:17:25 -0600
> Subject: Re: [TRNSYS-users] Workspace for TESS libraries
> Chun Kwong,
>   We made the decision with the release of the v17 libraries not to
> distribute those workspaces. It was hard to manage their settings and new
> versions of the compiler continue to be released and are challenging to
> manage. I would recommend that you simply use the MyType project that is
> part of the IVF11x solution. You can add as many Types to that MyType
> project as you want.
> Kind regards,
>  David
>
>
> On 12/3/2013 18:38, C K Lee wrote:
>
>> Hello.
>>
>> I have previously installed TRNSYS 17 together with the TESS libraries.
>>  However, unlike TRNSYS 16, I can't find where the workspace for the TESS
>> libraries is located.  Does anyone know? If so, please advise.  Thank you!
>>
>> Best Regards
>> LEE, Chun Kwong
>> City University of Hong Kong
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley at tess-inc.com
>
> http://www.tess-inc.com
> http://www.trnsys.com
>
>
>
>
> ---------- 已转发邮件 ----------
> From: David BRADLEY <d.bradley at tess-inc.com>
> To: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <
> trnsys-users at cae.wisc.edu>, Trnsys discussion group <
> trnsys-users at engr.wisc.edu>, "a8304506 at graduate.hku.hk" <
> a8304506 at graduate.hku.hk>
> Cc:
> Date: Wed, 04 Dec 2013 16:17:25 -0600
> Subject: Re: [TRNSYS-users] Workspace for TESS libraries
> Chun Kwong,
>   We made the decision with the release of the v17 libraries not to
> distribute those workspaces. It was hard to manage their settings and new
> versions of the compiler continue to be released and are challenging to
> manage. I would recommend that you simply use the MyType project that is
> part of the IVF11x solution. You can add as many Types to that MyType
> project as you want.
> Kind regards,
>  David
>
>
> On 12/3/2013 18:38, C K Lee wrote:
>
>> Hello.
>>
>> I have previously installed TRNSYS 17 together with the TESS libraries.
>>  However, unlike TRNSYS 16, I can't find where the workspace for the TESS
>> libraries is located.  Does anyone know? If so, please advise.  Thank you!
>>
>> Best Regards
>> LEE, Chun Kwong
>> City University of Hong Kong
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley at tess-inc.com
>
> http://www.tess-inc.com
> http://www.trnsys.com
>
>
>
>
> ---------- 已转发邮件 ----------
> From: David BRADLEY <d.bradley at tess-inc.com>
> To: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <
> trnsys-users at cae.wisc.edu>, mohamed.khabbaz at gmail.com
> Cc:
> Date: Wed, 04 Dec 2013 16:19:44 -0600
> Subject: Re: [TRNSYS-users] doors in sketchup /TRNbuild
>  Mohamed,
>   I would recommend that you treat glass doors as windows in Trnsys3D (ie
> draw them in Trnsys3D but set them to a different type of glass
> construction then your windows so that it will be easier to modify them
> later in TRNBuild). For opaque doors, the easiest thing to do is to simply
> add them in TRNBuild afterwards.
> Kind regards,
>  David
>
>
> On 12/4/2013 08:09, Mohamed Khabbaz wrote:
>
>  Hi
>
>  When I import my 3D model (.idf) from Sketchup to TRNbuild, Trnbuild does
> not know  doors and glass doors ( But TRNbuild knows windows).
>
>
> what must I make to resolve this situation?
>
> Thank you in advance.
>
> Best regards.
>
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475d.bradley at tess-inc.com
> http://www.tess-inc.comhttp://www.trnsys.com
>
>
>
> ---------- 已转发邮件 ----------
> From: "Jeremy Osborne" <jeremy.osborne at solem-consulting.com>
> To: "'LAHO DESIGN'" <lahodesign at yahoo.com>, "'TRNSYS users mailing list
> at the Solar Energy Lab, UW-Madison'" <trnsys-users at cae.wisc.edu>
> Cc:
> Date: Thu, 5 Dec 2013 11:24:29 +1100
> Subject: Re: [TRNSYS-users] CHILLER PERFORMANCE DATA
>
> Dear Laho
>
>
>
> There are usually data files in the component file (tmf) which can be
> edited for each instance the chiller is used. Please see the picture below.
> There is example files available for the chiller usually and you can click
> edit. Please see the component mathematical reference for the type you
> require for the details.
>
>
>
> What chiller kind (compression, absorption) are you modelling? What trnsys
> type are you wanting to use?
>
>
>
> These are important as the Fortran code underlying the type is important
> to understand because it times, the default method is not ideally suited
> and needed modification. We’ve edited the component to suit our needs and
> only use two data files and shown in the image before for a type 677
> chiller from the TESS extension.
>
>
>
> If you need further assistance do not hesitate to contact us.
>
>
>
>  *SOLEM Consulting Pty Ltd*
>
> Jeremy Osborne | Project Engineer BE
>
> 525 Harris St | SYDNEY NSW 2007| Australia
>
> P:  +61 2 8006 7355
>
> M: +61 421 914 516
>
> E: jeremy.osborne at solem-consulting.com
>
> W: www.solem-consulting.com
>
> Useful updates: http://www.linkedin.com/company/solem-consulting
>
>
>
> Please consider the environment before printing this email
>
>
>
> PLEASE NOTE
>
>
>
> The information contained in this e-mail may be confidential or
> privileged. Any unauthorised use or disclosure is prohibited. If you have
> received this e-mail in error, please delete it immediately and notify the
> sender by return email. Thank you. To the extent permitted by law, Solem
> Consulting does not represent, warrant and/or guarantee the integrity of
> this communication has been maintained nor the communication is free of
> error, virus, interception or interference.
>
>
>
>
>
>
>
> *From:* LAHO DESIGN [mailto:lahodesign at yahoo.com]
> *Sent:* Wednesday, 4 December 2013 9:15 PM
> *To:* TRNSYS-users at cae.wisc.edu
> *Subject:* [TRNSYS-users] CHILLER PERFORMANCE DATA
>
>
>
> HOW CAN I MODIFY THE FILE WHICH CONTAINS THE CHILLER PART LOAD PERFORMANCE
> DATA?
>
>
>
> THANKS
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131209/27b4d889/attachment-0004.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 8823 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131209/27b4d889/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BuildingProject12.lst
Type: application/octet-stream
Size: 733972 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20131209/27b4d889/attachment-0004.obj>

More information about the TRNSYS-users mailing list