[TRNSYS-users] Problems with Simulation Studio and Type 56

[marcello.caciolo at cofelyaxima-gdfsuez.com]

Dear Jean,

Thank you for your answer. Finally , I solved the problem by changing some input names. Indeed, there were input names exceeding 20 characters. Once changed these names and updated the file, the problems seem to be resolved.

If there is someone of TrnSolar in this list, could he/she confirm that TRNBUILD does not support variable names longer than 20 characters? If yes, would it be possible in a next release to check this and give an error if there are variable names longer than 20 characters?

Thank you.

Best regards,
Marcello Caciolo
Responsable Outils et Méthodes d'Analyse Energétique
[cid:image001.jpg at 01CE9F1B.2C179740]

Cellule Efficacité Energétique et Environnementale - Pôle Projets et Réalisations
46 Boulevard de la Prairie au Duc
BP 40119 - 44201 Nantes Cedex 02
Tél.: +33 02 40 41 06 57
marcello.caciolo at cofelyaxima-gdfsuez.com<mailto:prenom.nom at aximaseitha-gdfsuez.com>
P Pensez à l'environnement avant d'imprimer ce message



De : trnsys-users-bounces at cae.wisc.edu [mailto:trnsys-users-bounces at cae.wisc.edu] De la part de jeannieboef at gmail.com
Envoyé : mercredi 21 août 2013 18:39
À : TRNSYS users mailing list at the Solar Energy Lab, UW-Madison
Cc : <trnsys-users at cae.wisc.edu>
Objet : Re: [TRNSYS-users] Problems with Simulation Studio and Type 56

I've had this. Tried all sorts of text file edditing to get rid of "phantom" inputs to no avail. At some point I re-outputed the idf and re-imported the outputted idf to remake the bui file. Can't remember the exact combo, but at some point the problem dissappeared. Studio was remembering stuff that wasn't even there...or so it seemed.
Mit freundlichen Grüßen- Sent from my iPhone (excuse the brevity)

i. A.
Jean Marais
b.i.g. bechtold
Tel.   +49 30 6706662-23

On 21.08.2013, at 17:44, <marcello.caciolo at cofelyaxima-gdfsuez.com<mailto:marcello.caciolo at cofelyaxima-gdfsuez.com>> wrote:
Dear TRNSYS users,

I am working on a large project with 20 thermal zones and 14 orientations. After creating a building with TRNBUILD, I have a total of 318 inputs, including inputs for orientations, heat gains and HVAC.

When using the generated b17 file in Simulation Studio, updating inputs and connecting some of them, I noticed some strange behavior: sometimes, without any apparent reason, I reopen the connection list and some inputs are duplicated, once connected (in black) and once, at the correct place, not connected (in blue). I attach an image explaining well what I mean.

Have you already found this kind of behavior? Is there any way to fix it?

Thank you for your help!

Best regards,
Marcello Caciolo
Responsable Outils et Méthodes d'Analyse Energétique
<image001.jpg>

Cellule Efficacité Energétique et Environnementale - Pôle Projets et Réalisations
46 Boulevard de la Prairie au Duc
BP 40119 - 44201 Nantes Cedex 02
Tél.: +33 02 40 41 06 57
marcello.caciolo at cofelyaxima-gdfsuez.com<mailto:marcello.caciolo at cofelyaxima-gdfsuez.com>
P Pensez à l'environnement avant d'imprimer ce message

<Error example.doc>
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu<mailto:TRNSYS-users at cae.wisc.edu>
https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130822/483a2d06/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 4267 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20130822/483a2d06/attachment-0001.jpg>