[TRNSYS-users] Type 194 plugin problem

[David BRADLEY]

Santeri,
   When you select "add parameters" from the drop-down menu, eight 
fields should appear below the pulldown, each with a number in it. I 
think that by default the values are all set to -9999. Click in each 
field and type in the values from your manufacturer's data sheet, then 
press calculate. I would recommend writing down the five calculated 
results in case they do not transfer back to the proforma automatically.
Kind regards,
  David



On 9/5/2012 04:19, Santeri Siren wrote:
> Dear Trnsys users,
>
> I have a problem using the 194 plugin to calculate the five parameters.
>
> When I start the plugin and select "add parameters" the application 
> automatically anters a value for every parameter. And these values are 
> NOT the same that in my type 194 component.
>
> It seems that I can only use one of the pre-existing PV modules for 
> the "required information". Do you know how I can get the application 
> to use the parameters, of a PV panel that I have chosen, in the 
> "required information" box.
>
> Best regards,
>
> Santeri
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120905/84942c3a/attachment-0001.htm>