[TRNSYS-users] Question active layer in type 56

[Richard Thygesen]

Hi.
Have any of you out there had problem with controlling an active layer in type 56?
I have connected  the active layer to a GSHP system but the indoor temperature rise sharply when the controller turns the GSHP off and return to a "normal" 20°C when the GSHP starts again. Is the active layer incapable of handle a no flow situation?

Does anyone know what the problem might be?

Best regards
Richard Thygesen
Doctoral student

Mälardalen University
School of Sustainable Development of Society and Technology
Phone: +46(0)21-10 31 82
richard.thygesen at mdh.se<mailto:richard.thygesen at mdh.se>
www.mdh.se<http://www.mdh.se/>

[cid:image003.jpg at 01CD3277.711DD550]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120515/c4f5db4e/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 2447 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120515/c4f5db4e/attachment-0005.jpg>