[TRNSYS-users] Type60 two or more tanks in the simulation

[SUNLIANG CAO]

Dear all,

During my simulation, I have found a problem that: when there are two or more water storage tanks (Type60) in the simulation, the setting of heat exchanger in one of the tanks will influence all the tanks.

Is there anyone who has a good solution for this problem?

Thank you very much.

Kind Regards,
Sunliang Cao 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120325/2e80104d/attachment-0005.htm>