[TRNSYS-users] Use of Trnflow with vitual walls

[ewen raballand]

Thank you for your answer,
My coupling was'nt activated in both airnodes so I got an error.

Best regards,

Ewen

2012/6/19 Marion Hiller <hiller at transsolar.com>

> ** ** **
>
> Ewen,****
>
> ** **
>
> You may check the manual 05-MultizoneBuilding.pdf : ****
>
> ** **
>
> *5.2.4.10. Coupling between airnodes of same zone *****
>
> Since Version 17, a thermal zone may consist of more than one airnode.****
>
>  In general, these airnodes do not have a common wall. ****
>
> For defining a coupling between these airnode within the same zone, this
> regime option can be used. ****
>
> ** **
>
> Each airnode may get up to two coupling airflows from “adjacent” airnodes.
> ****
>
> (Note: “Upper” and “lower” are just names which don’t correspond to the
> actual location). ****
>
> First, the coupling has to be activated, than the airnode from which the
> air flow is coming has to be selected. ****
>
> Finally, the coupling airflow has to be defined as a constant, schedule or
> input.****
>
> ** **
>
> If you have more than one arinode in one zone an additional button in the
> regime called “coupling” is visible****
>
> In the airnode window.****
>
> You need activate this regime coupling in both airnodes. ****
>
> ** **
>
> ****Marion********
>
> ** **
>
> *Dipl.-Ing. ****Marion Hiller**** **
> **TRANSSOLAR: KlimaEngineering - Technologien für energieeffizientes
> Bauen und Nutzerkomfort in Gebäude **
> Munich - New York - Stuttgart + 49.711.67976.0
>
> **Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart
> Amtsgericht Stuttgart - HRB 23347, Steuernummer 99073/00911, USt-IdNr.:
> DE152272639*****
>
> *Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
> Dipl.Phys. Stefan Holst, Prof. Dipl.-Ing. Bleicher *
>
>  ****
>
> ** **
>  ------------------------------
>
>
> *Von:* ewen raballand [mailto:ewen.raballand at gmail.com]
> *Gesendet:* Montag, 18. Juni 2012 18:15
> *An:* **trnsys-users at cae.wisc.edu**
> *Betreff:* [TRNSYS-users] Use of Trnflow with vitual walls****
>
> ** **
>
> Dear users,
>
> I'm trying to use trnflow for a multiple airnode zone (3 airnodes). My
> problem is that i cannot define any airlink between my airnodes because
> there is no adjacent wall between them : virtual ceilings have been
> modelized. I know it's possible to define couplings between the airnodes
> but trnflow doesn't seem able to use them. Is there any solution ?
>
> Thank you for your help,
>
> Ewen
>
>   ****
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120619/a48bc396/attachment-0005.htm>