[TRNSYS-users] whole number of simulation start time

[Simon Binnemans]

Dear Trnsys user,

When I start a simulation and I do not set the simulation start time to a whole number (not hour 1 but hour 1.1 for example) I get very strange simulation results.
Attached I did a basic simulation where you can see the problem by comparing the simulation results with a start time of 0 hour and a start time of 0.1 hour for example.

Does anyone know if it is always necessary to set the simulation start hour to a whole number?


Thank you for your help,
Simon Binnemans

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120625/8c7687b1/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: STARTTIMETEST.rar
Type: application/octet-stream
Size: 61541 bytes
Desc: STARTTIMETEST.rar
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120625/8c7687b1/attachment-0001.obj>