Dear all,
I have a problem with Type 11.
My problem is the follow:
in the listing file I read a fatal error in the unit 28, but I haven't any
indications for this.
I attach the listing file and the messages that I read because I hope that
someone can help me.
Thanks.
Regards
Michela.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120710/400974c0/attachment-0005.htm>
-------------- next part --------------
TRNSYS - the TRaNsient SYstem Simulation program
The Solar Energy Lab at the University of Wisconsin - Madison, USA
Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France
Transsolar Energietechnik GmBH, Stuttgart, Germany
Thermal Energy System Specialists, Madison Wisconsin, USA
Release 16.00.0038
Listing file for: "C:\Users\michela\Desktop\materiale trnsys originario\PROVA CON IMPIANTO\Wizard3.dck"
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The TRNSYS Executable (TRNExe.exe) and main DLL (TRNDll.dll) are located in "C:\Program Files (x86)\Trnsys16\Exe"
*** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal errors.
*** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal errors found.
*** Evaluating the EQUATIONs and CONSTANTs to determine their initial values.
*** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin processing the remainder of the TRNSYS input file.
VERSION 16
*******************************************************************************
*** TRNSYS input file (deck) generated by TrnsysStudio
*** on marted?, luglio 10, 2012 at 12:53
*** from TrnsysStudio project: C:\Users\michela\Desktop\materiale trnsys originario\PROVA CON IMPIANTO\prova finale_04_07.TPF
***
*** If you edit this file, use the File/Import TRNSYS Input File function in
*** TrnsysStudio to update the project.
***
*** If you have problems, questions or suggestions please contact your local
*** TRNSYS distributor or mailto:iisibat at cstb.fr
***
*******************************************************************************
*******************************************************************************
*** Units
*******************************************************************************
*******************************************************************************
*** Control cards
*******************************************************************************
* START, STOP and STEP
CONSTANTS 3
START=0
STOP=8760
STEP=1
* User defined CONSTANTS
! Start time End time Time step
SIMULATION 0.0000000000000000E+00 8.7600000000000000E+03 1.0000000000000000E+00
! Integration Convergence
TOLERANCES 1.0000000000000002E-03 1.0000000000000002E-03
! Max iterations Max warnings Trace limit
LIMITS 30 30 31
! TRNSYS numerical integration solver method
DFQ 1
! TRNSYS output file width, number of characters
WIDTH 72
! NOLIST statement
LIST
! MAP statement
! Solver statement Minimum relaxation factor Maximum relaxation factor
SOLVER 0
1.000000000000000
1.000000000000000
! Nan DEBUG statement
NAN_CHECK 0
! Overwrite DEBUG statement
OVERWRITE_CHECK 0
! EQUATION SOLVER statement
EQUATION SOLVING METHOD 0
* EQUATIONS "Turn"
*
EQUATIONS 5
TURN = 45
AA_N = 180 + TURN
AA_S = TURN
AA_E = -90 + TURN
AA_W = 90 + TURN
*$UNIT_NAME Turn
*$LAYER Main
*$POSITION 49 61
*------------------------------------------------------------------------------
* EQUATIONS "Radiation"
*
EQUATIONS 18
AISZ = [109,10]
AISA = [109,11]
IT_H = Max([109,12],0)
IB_H = Max([109,13],0)
ID_H = [109,14]
AI_H = [109,16]
IT_N = [109,18]
AI_N = [109,22]
IB_N = [109,19] * LT(AI_N,90)
IT_S = [109,24]
IB_S = [109,25]
AI_S = [109,28]
IT_E = [109,30]
IB_E = [109,31]
AI_E = [109,34]
IT_W = [109,36]
IB_W = [109,37]
AI_W = [109,40]
*$UNIT_NAME Radiation
*$LAYER Main
*$POSITION 195 125
*------------------------------------------------------------------------------
* EQUATIONS "Shading+Light"
*
EQUATIONS 1
! 27
BRIGHT = [200,1]
*$UNIT_NAME Shading+Light
*$LAYER Controls
*$POSITION 338 488
*------------------------------------------------------------------------------
* Model "Weather data" (Type 109)
*
UNIT 109 TYPE 109 Weather data
*$UNIT_NAME Weather data
*$MODEL .\Weather Data Reading and Processing\Standard Format\TMY2\Type109-TMY2.tmf
*$POSITION 95 200
*$LAYER Main #
PARAMETERS 4
! 1 Data Reader Mode
! 2 Logical unit
! 3 Sky model for diffuse radiation
! 4 Tracking mode
2.0000000000000000E+00 3.0000000000000000E+01 4.0000000000000000E+00 1.0000000000000000E+00
INPUTS 9
! [unconnected] Ground reflectance
! [unconnected] Slope of surface-1
! Turn:AA_N ->Azimuth of surface-1
! [unconnected] Slope of surface-2
! Turn:AA_S ->Azimuth of surface-2
! [unconnected] Slope of surface-3
! Turn:AA_E ->Azimuth of surface-3
! [unconnected] Slope of surface-4
! Turn:AA_W ->Azimuth of surface-4
CONST CONST AA_N CONST AA_S
CONST AA_E CONST AA_W
*** INITIAL INPUT VALUES
2.0000000000000001E-01 9.0000000000000000E+01 2.2500000000000000E+02 9.0000000000000000E+01 4.5000000000000000E+01
9.0000000000000000E+01 -4.5000000000000000E+01 9.0000000000000000E+01 1.3500000000000000E+02
*** External files
ASSIGN C:\Users\michela\Desktop\File_meteo\IT-PERUGIA2007.tm2 30
*|? Weather data file |1000
*------------------------------------------------------------------------------
* Model "Psychrometrics" (Type 33)
*
UNIT 331 TYPE 33 Psychrometrics
*$UNIT_NAME Psychrometrics
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Relative Humidity Known\Type33e.tmf
*$POSITION 204 325
*$LAYER Main #
PARAMETERS 3
! 1 Psychrometrics mode
! 2 Wet bulb mode
! 3 Error mode
2.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+00
INPUTS 3
! Weather data:Ambient temperature ->Dry bulb temp.
! Weather data:relative humidity ->Percent relative humidity
! [unconnected] Pressure
109,1 109,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 5.0000000000000000E+01 1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Sky temp" (Type 69)
*
UNIT 69 TYPE 69 Sky temp
*$UNIT_NAME Sky temp
*$MODEL .\Physical Phenomena\Sky Temperature\read in cloudiness factor\Type69a.tmf
*$POSITION 353 273
*$LAYER Main # #
PARAMETERS 2
! 1 mode for cloudiness factor
! 2 height over sea level
1.0000000000000000E+00 0.0000000000000000E+00
INPUTS 5
! Psychrometrics:Dry bulb temperature ->Ambient temperature
! Psychrometrics:Dew point temperature. ->Dew point temperature at ambient conditions
! Weather data:beam radiation on horitonzal ->Beam radiation on the horizontal
! Weather data:sky diffuse radiation on horizontal ->Diffuse radiation on the horizontal
! [unconnected] Cloudiness factor - sky
331,7 331,8 109,13 109,14 CONST
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
*------------------------------------------------------------------------------
* EQUATIONS "Light Thresholds"
*
EQUATIONS 2
Toth_L_on = -3.6*120
Eoth_L_off = -3.6*200
*$UNIT_NAME Light Thresholds
*$LAYER Controls
*$POSITION 184 477
*------------------------------------------------------------------------------
* Model "Lights" (Type 2)
*
UNIT 200 TYPE 2 Lights
*$UNIT_NAME Lights
*$MODEL .\Controllers\Differential Controller w_ Hysteresis\generic\Solver 0 (Successive Substitution) Control Strategy\Type2d.tmf
*$POSITION 296 648
*$LAYER Controls #
*$# NOTE: This controller can only be used with Solver 0 (Successive substitution)
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
*$#
PARAMETERS 2
! 1 No. of oscillations
! 2 High limit cut-out
5.0000000000000000E+00 4.0000000000000000E+04
INPUTS 6
! [unconnected] Upper input value
! Radiation:IT_H ->Lower input value
! [unconnected] Monitoring value
! Lights:Output control function ->Input control function
! Light Thresholds:Toth_L_on ->Upper dead band
! Light Thresholds:Eoth_L_off ->Lower dead band
CONST IT_H CONST 200,1 TOTH_L_ON
EOTH_L_OFF
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Building" (Type 56)
*
UNIT 56 TYPE 56 Building
*$UNIT_NAME Building
*$MODEL .\Loads and Structures\Multi-Zone Building\With Standard Output Files\Type56a.tmf
*$POSITION 758 594
*$LAYER Main # #
*$#
PARAMETERS 6
! 1 Logical unit for building description file (.bui)
! 2 Star network calculation switch
! 3 Weighting factor for operative temperature
! 4 Logical unit for monthly summary
! 5 Logical unit for hourly temperatures
! 6 Logical unit for hourly loads
3.1000000000000000E+01 1.0000000000000000E+00 5.0000000000000000E-01 3.2000000000000000E+01 3.3000000000000000E+01
3.4000000000000000E+01
INPUTS 62
! Psychrometrics:Dry bulb temperature -> 1- TAMB (AMBIENT TEMPERATURE)
! Psychrometrics:Percent relative humidity -> 2- ARELHUM (RELATIVE AMBIENT HUMIDITY)
! Sky temp:Fictive sky temperature -> 3- TSKY (FIKTIVE SKY TEMPERATURE)
! Radiation:IT_N -> 4- ITNORTH (INCIDENT RADIATION FOR ORIENTATION NORTH)
! Radiation:IT_S -> 5- ITSOUTH (INCIDENT RADIATION FOR ORIENTATION SOUTH)
! Radiation:IT_E -> 6- ITEAST (INCIDENT RADIATION FOR ORIENTATION EAST)
! Radiation:IT_W -> 7- ITWEST (INCIDENT RADIATION FOR ORIENTATION WEST)
! Radiation:IT_H -> 8- ITHORIZONT (INCIDENT RADIATION FOR ORIENTATION HORIZONT)
! Radiation:IB_N -> 9- IBNORTH (INCIDENT BEAM RADIATION FOR ORIENTATION NORTH)
! Radiation:IB_S -> 10- IBSOUTH (INCIDENT BEAM RADIATION FOR ORIENTATION SOUTH)
! Radiation:IB_E -> 11- IBEAST (INCIDENT BEAM RADIATION FOR ORIENTATION EAST)
! Radiation:IB_W -> 12- IBWEST (INCIDENT BEAM RADIATION FOR ORIENTATION WEST)
! Radiation:IB_H -> 13- IBHORIZONT (INCIDENT BEAM RADIATION FOR ORIENTATION HORIZONT)
! Radiation:AI_N -> 14- AINORTH (ANGLE OF INCIDENCE FOR ORIENTATION NORTH)
! Radiation:AI_S -> 15- AISOUTH (ANGLE OF INCIDENCE FOR ORIENTATION SOUTH)
! Radiation:AI_E -> 16- AIEAST (ANGLE OF INCIDENCE FOR ORIENTATION EAST)
! Radiation:AI_W -> 17- AIWEST (ANGLE OF INCIDENCE FOR ORIENTATION WEST)
! Radiation:AI_H -> 18- AIHORIZONT (ANGLE OF INCIDENCE FOR ORIENTATION HORIZONT)
! Shading+Light:BRIGHT -> 38- BRIGHT (INPUT)
! [unconnected] 20- CONT_NAT_2 (INPUT)
! [unconnected] 21- CONT_NAT_3 (INPUT)
! [unconnected] 22- CONT_NAT_4 (INPUT)
! [unconnected] 23- CONT_NAT_5 (INPUT)
! [unconnected] 24- CONT_NAT_6 (INPUT)
! [unconnected] 25- CONT_NAT_7 (INPUT)
! [unconnected] 26- CONT_NAT_8 (INPUT)
! [unconnected] 27- CONT_NAT_9 (INPUT)
! [unconnected] 34- S_NORTH (INPUT)
! [unconnected] 35- S_SOUTH (INPUT)
! [unconnected] 36- S_EAST (INPUT)
! [unconnected] 37- S_WEST (INPUT)
! [unconnected] 32- CONT_NAT_1 (INPUT)
! [unconnected] 33- T_COOL_ON (INPUT)
! [unconnected] 34- S_NORTH (INPUT)
! [unconnected] 35- S_SOUTH (INPUT)
! [unconnected] 36- S_EAST (INPUT)
! [unconnected] 37- S_WEST (INPUT)
! [unconnected] 38- BRIGHT (INPUT)
! TYPE11f:Temperature at outlet 2 -> 39- TEMP1 (INPUT)
! TYPE11f-2:Temperature at outlet 2 -> 40- TEMP2 (INPUT)
! TYPE11f-3:Temperature at outlet 2 -> 41- TEMP3 (INPUT)
! TYPE11f-4:Temperature at outlet 2 -> 42- TEMP4 (INPUT)
! TYPE11f-5:Temperature at outlet 2 -> 43- TEMP5 (INPUT)
! TYPE11f-6:Temperature at outlet 2 -> 44- TEMP6 (INPUT)
! TYPE11f-7:Temperature at outlet 2 -> 45- TEMP7 (INPUT)
! TYPE11f-8:Temperature at outlet 2 -> 46- TEMP8 (INPUT)
! TYPE11f-9:Temperature at outlet 2 -> 47- TEMP9 (INPUT)
! TYPE11f-10:Temperature at outlet 2 -> 48- TEMP10 (INPUT)
! TYPE11f-11:Temperature at outlet 2 -> 49- TEMP11 (INPUT)
! TYPE11f-12:Temperature at outlet 2 -> 50- TEMP12 (INPUT)
! TYPE11f:Flow rate at outlet 2 -> 51- PORTATA1 (INPUT)
! TYPE11f-2:Flow rate at outlet 2 -> 52- PORTATA2 (INPUT)
! TYPE11f-3:Flow rate at outlet 2 -> 53- PORTATA3 (INPUT)
! TYPE11f-4:Flow rate at outlet 2 -> 54- PORTATA4 (INPUT)
! TYPE11f-5:Flow rate at outlet 2 -> 55- PORTATA5 (INPUT)
! TYPE11f-6:Flow rate at outlet 2 -> 56- PORTATA6 (INPUT)
! TYPE11f-7:Flow rate at outlet 2 -> 57- PORTATA7 (INPUT)
! TYPE11f-8:Flow rate at outlet 2 -> 58- PORTATA8 (INPUT)
! TYPE11f-9:Flow rate at outlet 2 -> 59- PORTATA9 (INPUT)
! TYPE11f-10:Flow rate at outlet 2 -> 60- PORTATA10 (INPUT)
! TYPE11f-11:Flow rate at outlet 2 -> 61- PORTATA11 (INPUT)
! TYPE11f-12:Flow rate at outlet 2 -> 62- PORTATA12 (INPUT)
331,7 331,6 69,1 IT_N IT_S
IT_E IT_W IT_H IB_N IB_S
IB_E IB_W IB_H AI_N AI_S
AI_E AI_W AI_H BRIGHT CONST
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST
CONST CONST CONST CONST CONST
CONST CONST CONST 12,3 13,3
14,3 15,3 16,3 17,3 18,3
19,3 20,3 21,3 22,3 23,3
12,4 13,4 14,4 15,4 16,4
17,4 18,4 19,4 20,4 21,4
22,4 23,4
*** INITIAL INPUT VALUES
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00 0.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
*** External files
ASSIGN edificio tesi con pavimenti radianti.bui 31
*|? Building description file (*.bui) |1000
ASSIGN T56_std-Output.sum 32
*|? Monthly Summary File |1000
ASSIGN T56_std-temp.prn 33
*|? Hourly Temperatures |1000
ASSIGN T56_std-q.prn 34
*|? Hourly Loads |1000
*------------------------------------------------------------------------------
* Model "Temperature" (Type 65)
*
UNIT 25 TYPE 65 Temperature
*$UNIT_NAME Temperature
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf
*$POSITION 1057 594
*$LAYER Main # #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical unit for output file
! 11 Output file units
! 12 Output file delimiter
1.0000000000000000E+01 4.0000000000000000E+00 0.0000000000000000E+00 4.5000000000000000E+01 0.0000000000000000E+00
4.5000000000000000E+01 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 14
! Building: 1- (air temperature of zone) TAIR 1 ->Left axis variable-1
! Building: 2- (air temperature of zone) TAIR 2 ->Left axis variable-2
! Building: 3- (air temperature of zone) TAIR 3 ->Left axis variable-3
! Building: 4- (air temperature of zone) TAIR 4 ->Left axis variable-4
! Building: 5- (air temperature of zone) TAIR 5 ->Left axis variable-5
! Building: 6- (air temperature of zone) TAIR 6 ->Left axis variable-6
! Building: 7- (air temperature of zone) TAIR 7 ->Left axis variable-7
! Building: 8- (air temperature of zone) TAIR 8 ->Left axis variable-8
! Building: 9- (air temperature of zone) TAIR 9 ->Left axis variable-9
! Building: 10- (air temperature of zone) TAIR 10 ->Left axis variable-10
! Building: 11- (air temperature of zone) TAIR 11 ->Right axis variable-1
! Building: 12- (air temperature of zone) TAIR 12 ->Right axis variable-2
! Building: 13- (air temperature of zone) TAIR 13 ->Right axis variable-3
! Building: 14- (air temperature of zone) TAIR 14 ->Right axis variable-4
56,1 56,2 56,3 56,4 56,5
56,6 56,7 56,8 56,9 56,10
56,11 56,12 56,13 56,14
*** INITIAL INPUT VALUES
appart7 appart3 garage appar t1 appart4
appart2 vanoscale appart9 appar t5 appart6
appart8 appart10 appart11 appar t12
LABELS 3
Temperatures [deg C]
Temperatures [deg C]
Temperatures
*------------------------------------------------------------------------------
* Model "TYPE11f" (Type 11)
*
UNIT 12 TYPE 11 TYPE11f
*$UNIT_NAME TYPE11f
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\TYPE11f.tmf
*$POSITION 470 72
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! Type668:Outlet load temperature ->Inlet temperature
! Type668:Load flow rate ->Inlet flow rate
! [unconnected] Control signal
26,3 26,4 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "TYPE11f-2" (Type 11)
*
UNIT 13 TYPE 11 TYPE11f-2
*$UNIT_NAME TYPE11f-2
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\TYPE11f.tmf
*$POSITION 620 40
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! TYPE11f:Temperature at outlet 1 ->Inlet temperature
! TYPE11f:Flow rate at outlet 1 ->Inlet flow rate
! [unconnected] Control signal
12,1 12,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "TYPE11f-3" (Type 11)
*
UNIT 14 TYPE 11 TYPE11f-3
*$UNIT_NAME TYPE11f-3
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\TYPE11f.tmf
*$POSITION 620 136
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! TYPE11f-2:Temperature at outlet 1 ->Inlet temperature
! TYPE11f-2:Flow rate at outlet 1 ->Inlet flow rate
! [unconnected] Control signal
13,1 13,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "TYPE11f-4" (Type 11)
*
UNIT 15 TYPE 11 TYPE11f-4
*$UNIT_NAME TYPE11f-4
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\TYPE11f.tmf
*$POSITION 620 221
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! TYPE11f-3:Temperature at outlet 1 ->Inlet temperature
! TYPE11f-3:Flow rate at outlet 1 ->Inlet flow rate
! [unconnected] Control signal
14,1 14,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "TYPE11f-5" (Type 11)
*
UNIT 16 TYPE 11 TYPE11f-5
*$UNIT_NAME TYPE11f-5
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\TYPE11f.tmf
*$POSITION 609 328
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! TYPE11f-4:Temperature at outlet 1 ->Inlet temperature
! TYPE11f-4:Flow rate at outlet 1 ->Inlet flow rate
! [unconnected] Control signal
15,1 15,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "TYPE11f-6" (Type 11)
*
UNIT 17 TYPE 11 TYPE11f-6
*$UNIT_NAME TYPE11f-6
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\TYPE11f.tmf
*$POSITION 609 413
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! TYPE11f-5:Temperature at outlet 1 ->Inlet temperature
! TYPE11f-5:Flow rate at outlet 1 ->Inlet flow rate
! [unconnected] Control signal
16,1 16,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "TYPE11f-7" (Type 11)
*
UNIT 18 TYPE 11 TYPE11f-7
*$UNIT_NAME TYPE11f-7
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\TYPE11f.tmf
*$POSITION 620 498
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! TYPE11f-6:Temperature at outlet 1 ->Inlet temperature
! TYPE11f-6:Flow rate at outlet 1 ->Inlet flow rate
! [unconnected] Control signal
17,1 17,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "TYPE11f-8" (Type 11)
*
UNIT 19 TYPE 11 TYPE11f-8
*$UNIT_NAME TYPE11f-8
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\TYPE11f.tmf
*$POSITION 609 573
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! TYPE11f-7:Temperature at outlet 1 ->Inlet temperature
! TYPE11f-7:Flow rate at outlet 1 ->Inlet flow rate
! [unconnected] Control signal
18,1 18,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "TYPE11f-9" (Type 11)
*
UNIT 20 TYPE 11 TYPE11f-9
*$UNIT_NAME TYPE11f-9
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\TYPE11f.tmf
*$POSITION 609 658
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! TYPE11f-8:Temperature at outlet 1 ->Inlet temperature
! TYPE11f-8:Flow rate at outlet 1 ->Inlet flow rate
! [unconnected] Control signal
19,1 19,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "TYPE11f-10" (Type 11)
*
UNIT 21 TYPE 11 TYPE11f-10
*$UNIT_NAME TYPE11f-10
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\TYPE11f.tmf
*$POSITION 609 733
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! TYPE11f-9:Temperature at outlet 1 ->Inlet temperature
! TYPE11f-9:Flow rate at outlet 1 ->Inlet flow rate
! [unconnected] Control signal
20,1 20,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "TYPE11f-11" (Type 11)
*
UNIT 22 TYPE 11 TYPE11f-11
*$UNIT_NAME TYPE11f-11
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\TYPE11f.tmf
*$POSITION 609 808
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! TYPE11f-10:Temperature at outlet 1 ->Inlet temperature
! TYPE11f-10:Flow rate at outlet 1 ->Inlet flow rate
! [unconnected] Control signal
21,1 21,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "TYPE11f-12" (Type 11)
*
UNIT 23 TYPE 11 TYPE11f-12
*$UNIT_NAME TYPE11f-12
*$MODEL .\Hydronics\Flow Diverter\Other Fluids\TYPE11f.tmf
*$POSITION 609 882
*$LAYER Water Loop #
PARAMETERS 1
! 1 Controlled flow diverter mode
2.0000000000000000E+00
INPUTS 3
! TYPE11f-11:Temperature at outlet 1 ->Inlet temperature
! TYPE11f-11:Flow rate at outlet 1 ->Inlet flow rate
! [unconnected] Control signal
22,1 22,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 5.0000000000000000E-01
*------------------------------------------------------------------------------
* Model "Type557a" (Type 557)
*
UNIT 24 TYPE 557 Type557a
*$UNIT_NAME Type557a
*$MODEL .\GHP Library (TESS)\Ground Heat Exchangers\Vertical U-Tubes\Standard\Type557a.tmf
*$POSITION 89 935
*$LAYER Main #
PARAMETERS 44
! 1 Storage volume
! 2 Borehole depth
! 3 Header depth
! 4 Number of boreholes
! 5 Borehole radius
! 6 No. of boreholes in series
! 7 Number of radial regions
! 8 Number of vertical regions
! 9 Storage thermal conductivity
! 10 Storage heat capacity
! 11 Negative of u-tubes/bore
! 12 Outer radius of u-tube pipe
! 13 Inner radius of u-tube pipe
! 14 Center-to-center half distance
! 15 Fill thermal conductivity
! 16 Pipe thermal conductivity
! 17 Gap thermal conductivity
! 18 Gap thickness
! 19 Reference borehole flow rate
! 20 Reference temperature
! 21 Pipe to pipe heat transfer
! 22 Fluid specific heat
! 23 Fluid density
! 24 Insulation indicator
! 25 Insulation height fraction
! 26 Insulation thickness
! 27 Insulation thermal conductivity
! 28 Number of simulation years
! 29 Maximum storage temperature
! 30 Initial surface temperature
! 31 Initial thermal gradient
! 32 Number of preheating years
! 33 Maximum preheat temperature
! 34 Minimum preheat temperature
! 35 Preheat phase delay
! 36 Average air temperature
! 37 Amplitude of air temperature
! 38 Air temperature phase delay
! 39 Number of ground layers
! 40 Thermal conductivity of layer
! 41 Heat capacity of layer
! 42 Thickness of layer
! 43 Not used (printing 1)
! 44 Not used (printing 2)
2.9700000000000000E+04 1.0000000000000000E+02 1.5000000000000000E+00 7.0000000000000000E+00 1.2000000000000001E-01
1.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+01 4.6799999999999997E+00 2.0160000000000000E+03
-1.0000000000000000E+00 3.2000000000000008E-02 2.9000000000000005E-02 5.0000000000000010E-02 4.6799999999999997E+00
1.5122000000000000E+00 5.0400000000000000E+00 0.0000000000000000E+00 6.1303999999999996E+02 3.0000000000000000E+01
0.0000000000000000E+00 4.1899999999999995E+00 1.0000000000000000E+03 0.0000000000000000E+00 5.0000000000000000E-01
2.5400000000000006E-02 1.0000000000000000E+00 1.0000000000000000E+00 1.0000000000000000E+02 2.0000000000000000E+01
0.0000000000000000E+00 0.0000000000000000E+00 3.0000000000000000E+01 1.0000000000000000E+01 9.0000000000000000E+01
2.0000000000000000E+01 1.5000000000000000E+01 2.4000000000000000E+02 1.0000000000000000E+00 4.6799999999999997E+00
2.0160000000000000E+03 1.0000000000000000E+03 0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 5
! Type668:Outlet source temperature ->Inlet fluid temperature
! Type668:Source flow rate ->Inlet flowrate (total)
! Weather data:Ambient temperature ->Temperature on top of storage
! Weather data:Ambient temperature ->Air temperature
! [unconnected] Circulation switch
26,1 26,2 109,1 109,1 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 0.0000000000000000E+00 2.0000000000000000E+01 2.0000000000000000E+01 1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type668" (Type 668)
*
UNIT 26 TYPE 668 Type668
*$UNIT_NAME Type668
*$MODEL .\HVAC Library (TESS)\Water-to-Water Heat Pump\Type668.tmf
*$POSITION 449 764
*$LAYER Main #
PARAMETERS 9
! 1 Source specific heat
! 2 Load specific heat
! 3 Logical unit number for cooling data file
! 4 Number of source temperatures - cooling
! 5 Number of load temperatures - cooling
! 6 Logical unit for heating data
! 7 Number of source temps. - heating
! 8 Number of load temps. - heating
! 9 Number of identical heat pumps
4.1899999999999995E+00 4.1899999999999995E+00 3.5000000000000000E+01 6.0000000000000000E+00 4.0000000000000000E+00
3.6000000000000000E+01 5.0000000000000000E+00 4.0000000000000000E+00 1.0000000000000000E+00
INPUTS 6
! Type3b:Outlet fluid temperature ->Inlet source temperature
! Type3b:Outlet flow rate ->Source flow rate
! Type3b-2:Outlet fluid temperature ->Inlet load temperature
! Type3b-2:Outlet flow rate ->Load flow rate
! [unconnected] Cooling control signal
! [unconnected] Heating control signal
27,1 27,2 39,1 39,2 CONST
CONST
*** INITIAL INPUT VALUES
4.0000000000000000E+01 1.2000000000000000E+04 2.0000000000000000E+01 1.2000000000000000E+04 1.0000000000000000E+00
0.0000000000000000E+00
*** External files
ASSIGN C:\Program Files (x86)\Trnsys16\Tess Models\SampleCatalogData\Water-to-WaterHeatPump\Samp_C.Dat 35
*|? Which file contains the cooling performance data? |1000
ASSIGN C:\Users\michela\Desktop\Materiale per 2a tesi\materiale trnsys\file heating pompa di calore.txt 36
*|? Which file contains the heating performance data? |1000
*------------------------------------------------------------------------------
* Model "Type3b" (Type 3)
*
UNIT 27 TYPE 3 Type3b
*$UNIT_NAME Type3b
*$MODEL .\Hydronics\Pumps\Single Speed\Type3b.tmf
*$POSITION 95 776
*$LAYER Water Loop #
PARAMETERS 5
! 1 Maximum flow rate
! 2 Fluid specific heat
! 3 Maximum power
! 4 Conversion coefficient
! 5 Power coefficient
1.0000000000000000E+02 4.1899999999999995E+00 6.0000000000000000E+01 5.0000000000000010E-02 5.0000000000000000E-01
INPUTS 3
! Type557a:Outlet temperature ->Inlet fluid temperature
! Type557a:Outlet flow rate (total) ->Inlet mass flow rate
! [unconnected] Control signal
24,1 24,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "TYPE11h" (Type 11)
*
UNIT 28 TYPE 11 TYPE11h
*$UNIT_NAME TYPE11h
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\TYPE11h.tmf
*$POSITION 846 40
*$LAYER Water Loop #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! Building: 15- (fluid outlet temperature...) TOFL 10 ->Temperature at inlet 1
! [unconnected] Flow rate at inlet 1
! [unconnected] Temperature at inlet 2
! [unconnected] Flow rate at inlet 2
56,15 CONST CONST CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "TYPE11h-2" (Type 11)
*
UNIT 29 TYPE 11 TYPE11h-2
*$UNIT_NAME TYPE11h-2
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\TYPE11h.tmf
*$POSITION 846 125
*$LAYER Water Loop #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! TYPE11h:Outlet temperature ->Temperature at inlet 1
! TYPE11h:Outlet flow rate ->Flow rate at inlet 1
! Building: 16- (fluid outlet temperature...) TOFL 14 ->Temperature at inlet 2
! [unconnected] Flow rate at inlet 2
28,1 28,2 56,16 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "TYPE11h-3" (Type 11)
*
UNIT 30 TYPE 11 TYPE11h-3
*$UNIT_NAME TYPE11h-3
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\TYPE11h.tmf
*$POSITION 846 221
*$LAYER Water Loop #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! TYPE11h-2:Outlet temperature ->Temperature at inlet 1
! TYPE11h-2:Outlet flow rate ->Flow rate at inlet 1
! Building: 17- (fluid outlet temperature...) TOFL 19 ->Temperature at inlet 2
! [unconnected] Flow rate at inlet 2
29,1 29,2 56,17 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "TYPE11h-4" (Type 11)
*
UNIT 31 TYPE 11 TYPE11h-4
*$UNIT_NAME TYPE11h-4
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\TYPE11h.tmf
*$POSITION 846 306
*$LAYER Water Loop #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! TYPE11h-3:Outlet temperature ->Temperature at inlet 1
! TYPE11h-3:Outlet flow rate ->Flow rate at inlet 1
! Building: 18- (fluid outlet temperature...) TOFL 53 ->Temperature at inlet 2
! [unconnected] Flow rate at inlet 2
30,1 30,2 56,18 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "TYPE11h-5" (Type 11)
*
UNIT 32 TYPE 11 TYPE11h-5
*$UNIT_NAME TYPE11h-5
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\TYPE11h.tmf
*$POSITION 846 381
*$LAYER Water Loop #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! TYPE11h-4:Outlet temperature ->Temperature at inlet 1
! TYPE11h-4:Outlet flow rate ->Flow rate at inlet 1
! Building: 19- (fluid outlet temperature...) TOFL 58 ->Temperature at inlet 2
! [unconnected] Flow rate at inlet 2
31,1 31,2 56,19 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "TYPE11h-6" (Type 11)
*
UNIT 33 TYPE 11 TYPE11h-6
*$UNIT_NAME TYPE11h-6
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\TYPE11h.tmf
*$POSITION 846 456
*$LAYER Water Loop #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! TYPE11h-5:Outlet temperature ->Temperature at inlet 1
! TYPE11h-5:Outlet flow rate ->Flow rate at inlet 1
! Building: 20- (fluid outlet temperature...) TOFL 69 ->Temperature at inlet 2
! [unconnected] Flow rate at inlet 2
32,1 32,2 56,20 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "TYPE11h-7" (Type 11)
*
UNIT 34 TYPE 11 TYPE11h-7
*$UNIT_NAME TYPE11h-7
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\TYPE11h.tmf
*$POSITION 846 530
*$LAYER Water Loop #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! TYPE11h-6:Outlet temperature ->Temperature at inlet 1
! TYPE11h-6:Outlet flow rate ->Flow rate at inlet 1
! Building: 22- (fluid outlet temperature...) TOFL 44 ->Temperature at inlet 2
! [unconnected] Flow rate at inlet 2
33,1 33,2 56,22 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "TYPE11h-8" (Type 11)
*
UNIT 35 TYPE 11 TYPE11h-8
*$UNIT_NAME TYPE11h-8
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\TYPE11h.tmf
*$POSITION 846 626
*$LAYER Water Loop #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! TYPE11h-7:Outlet temperature ->Temperature at inlet 1
! TYPE11h-7:Outlet flow rate ->Flow rate at inlet 1
! Building: 23- (fluid outlet temperature...) TOFL 133 ->Temperature at inlet 2
! [unconnected] Flow rate at inlet 2
34,1 34,2 56,23 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "TYPE11h-9" (Type 11)
*
UNIT 36 TYPE 11 TYPE11h-9
*$UNIT_NAME TYPE11h-9
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\TYPE11h.tmf
*$POSITION 846 701
*$LAYER Water Loop #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! TYPE11h-8:Outlet temperature ->Temperature at inlet 1
! TYPE11h-8:Outlet flow rate ->Flow rate at inlet 1
! Building: 24- (fluid outlet temperature...) TOFL 54 ->Temperature at inlet 2
! [unconnected] Flow rate at inlet 2
35,1 35,2 56,24 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "TYPE11h-10" (Type 11)
*
UNIT 37 TYPE 11 TYPE11h-10
*$UNIT_NAME TYPE11h-10
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\TYPE11h.tmf
*$POSITION 846 776
*$LAYER Water Loop #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! TYPE11h-9:Outlet temperature ->Temperature at inlet 1
! TYPE11h-9:Outlet flow rate ->Flow rate at inlet 1
! Building: 25- (fluid outlet temperature...) TOFL 169 ->Temperature at inlet 2
! [unconnected] Flow rate at inlet 2
36,1 36,2 56,25 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "TYPE11h-11" (Type 11)
*
UNIT 38 TYPE 11 TYPE11h-11
*$UNIT_NAME TYPE11h-11
*$MODEL .\Hydronics\Tee-Piece\Other Fluids\TYPE11h.tmf
*$POSITION 846 850
*$LAYER Water Loop #
PARAMETERS 1
! 1 Tee piece mode
1.0000000000000000E+00
INPUTS 4
! TYPE11h-10:Outlet temperature ->Temperature at inlet 1
! TYPE11h-10:Outlet flow rate ->Flow rate at inlet 1
! Building: 26- (fluid outlet temperature...) TOFL 155 ->Temperature at inlet 2
! [unconnected] Flow rate at inlet 2
37,1 37,2 56,26 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 2.0000000000000000E+01 1.0000000000000000E+02
*------------------------------------------------------------------------------
* Model "Type3b-2" (Type 3)
*
UNIT 39 TYPE 3 Type3b-2
*$UNIT_NAME Type3b-2
*$MODEL .\Hydronics\Pumps\Single Speed\Type3b.tmf
*$POSITION 746 957
*$LAYER Water Loop #
PARAMETERS 5
! 1 Maximum flow rate
! 2 Fluid specific heat
! 3 Maximum power
! 4 Conversion coefficient
! 5 Power coefficient
1.0000000000000000E+02 4.1899999999999995E+00 6.0000000000000000E+01 5.0000000000000010E-02 5.0000000000000000E-01
INPUTS 3
! TYPE11h-11:Outlet temperature ->Inlet fluid temperature
! TYPE11h-11:Outlet flow rate ->Inlet mass flow rate
! [unconnected] Control signal
38,1 38,2 CONST
*** INITIAL INPUT VALUES
2.0000000000000000E+01 1.0000000000000000E+02 1.0000000000000000E+00
*------------------------------------------------------------------------------
* Model "Type65d" (Type 65)
*
UNIT 40 TYPE 65 Type65d
*$UNIT_NAME Type65d
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf
*$POSITION 354 914
*$LAYER Main #
PARAMETERS 12
! 1 Nb. of left-axis variables
! 2 Nb. of right-axis variables
! 3 Left axis minimum
! 4 Left axis maximum
! 5 Right axis minimum
! 6 Right axis maximum
! 7 Number of plots per simulation
! 8 X-axis gridpoints
! 9 Shut off Online w/o removing
! 10 Logical unit for output file
! 11 Output file units
! 12 Output file delimiter
1.0000000000000000E+00 1.0000000000000000E+00 0.0000000000000000E+00 2.5000000000000000E+01 0.0000000000000000E+00
2.5000000000000000E+01 1.0000000000000000E+00 1.2000000000000000E+01 0.0000000000000000E+00 -1.0000000000000000E+00
0.0000000000000000E+00 0.0000000000000000E+00
INPUTS 2
! Type557a:Average storage temperature ->Left axis variable
! Type668:Coefficient of Performance (C.O.P) ->Right axis variable
24,3 26,8
*** INITIAL INPUT VALUES
Temperatura media
LABELS 3
Temperatures
Heat transfer rates
Graph 1
*------------------------------------------------------------------------------
END
TRANSIENT SIMULATION STARTING AT TIME = 0.0000000000000000E+00
STOPPING AT TIME = 8.7600000000000000E+03
TIMESTEP = 1 / 1
DIFFERENTIAL EQUATION ERROR TOLERANCE = 1.0000000000000002E-03
ALGEBRAIC CONVERGENCE TOLERANCE = 1.0000000000000002E-03
DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from TRNDll.dll: Type11, Type65, Type3, Type56, Type69, Type109, Type2, Type33
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSApplicationsLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSControlsLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from "TESSGHPLibrary_ReleaseVersion202.dll": Type557
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSGreenBuildingLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : The following Types were loaded from "TESSHVACLibrary_ReleaseVersion202.dll": Type668
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSSolarLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSStorageLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
Message : "TESSUtilityLibrary_ReleaseVersion202.dll" was found but did not contain any components from the input file.
*** Notice at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 199 : TRNSYS found at least one user DLL in the UserLib directory. (Note: Only DLL's including Types that are used in the simulation are loaded)
Reported information : 2 user DLLs were loaded after searching in "C:\Program Files (x86)\Trnsys16\UserLib"
infiletest 1 0.78E+02 0.78E+02
dataread 1 0.94E+02 0.94E+02
------------------------------------------------------------------------------------------
type109 2 0.17E+03 0.17E+03
==========================================================================================
==========================================================================================
*** Notice at time : 0.000000
Generated by Unit : 56
Generated by Type : 56
Message : TRNFLOW multi zone air flow model integrated
*** Notice at time : 0.000000
Generated by Unit : 56
Generated by Type : 56
Message : Active layers and internal window calculations integrated
*** Notice at time : 0.000000
Generated by Unit : 56
Generated by Type : 56
Message : No internal humidity calculations are performed and no condensation warnings are printed. if any of the outputs ntype 9,10,11,26,29,40,41,47,48 or 49 is specified The humidity calculations, using an internal timestep, will be switched on and condensation checks are performed
*** The TRNSYS components will be called in the following order:
Unit # 109 Type # 109
Unit # 331 Type # 33
Unit # 69 Type # 69
Unit # 200 Type # 2
Unit # 56 Type # 56
Unit # 12 Type # 11
Unit # 13 Type # 11
Unit # 14 Type # 11
Unit # 15 Type # 11
Unit # 16 Type # 11
Unit # 17 Type # 11
Unit # 18 Type # 11
Unit # 19 Type # 11
Unit # 20 Type # 11
Unit # 21 Type # 11
Unit # 22 Type # 11
Unit # 23 Type # 11
Unit # 24 Type # 557
Unit # 26 Type # 668
Unit # 27 Type # 3
Unit # 28 Type # 11
Unit # 29 Type # 11
Unit # 30 Type # 11
Unit # 31 Type # 11
Unit # 32 Type # 11
Unit # 33 Type # 11
Unit # 34 Type # 11
Unit # 35 Type # 11
Unit # 36 Type # 11
Unit # 37 Type # 11
Unit # 38 Type # 11
Unit # 39 Type # 3
Unit # 25 Type # 65
Unit # 40 Type # 65
!Values of Entering Load Temperatures in Degrees Celsius
!Values of Entering Source Temperatures in Degrees Celsius
!Total Cooling(kW)and Power(kW) at -3.89/7.22
!Total Cooling(kW)and Power(kW) at -3.89/12.78
!Total Cooling(kW)and Power(kW) at -3.89/18.33
!Total Cooling(kW)and Power(kW) at -3.89/23.89
!Total Cooling(kW)and Power(kW) at -3.89/29.44
!Total Cooling(kW)and Power(kW) at -3.89/37.78
!Total Cooling(kW)and Power(kW) at 7.22/7.22
!Total Cooling(kW)and Power(kW) at 7.22/12.78
!Total Cooling(kW)and Power(kW) at 7.22/18.33
!Total Cooling(kW)and Power(kW) at 7.22/23.89
!Total Cooling(kW)and Power(kW) at 7.22/29.44
!Total Cooling(kW)and Power(kW) at 7.22/37.78
!Total Cooling(kW)and Power(kW) at 12.78/7.22
!Total Cooling(kW)and Power(kW) at 12.78/12.78
!Total Cooling(kW)and Power(kW) at 12.78/18.33
!Total Cooling(kW)and Power(kW) at 12.78/23.89
!Total Cooling(kW)and Power(kW) at 12.78/29.44
!Total Cooling(kW)and Power(kW) at 12.78/37.78
!Total Cooling(kW)and Power(kW) at 18.33/7.22
!Total Cooling(kW)and Power(kW) at 18.33/12.78
!Total Cooling(kW)and Power(kW) at 18.33/18.33
!Total Cooling(kW)and Power(kW) at 18.33/23.89
!Total Cooling(kW)and Power(kW) at 18.33/29.44
!Total Cooling(kW)and Power(kW) at 18.33/37.78
*** Fatal Error at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Specific fluid mass flow of active layer in surface 44 below minimum value of 4.38 below minimum value of
==========================================================================================
TYPE109 TIME REPORT: (for debugging purpose)
------------------------------------------------------------------------------------------
time_report_unit: 6
time_filter: .8760E+07 [ms]
==========================================================================================
Level0 Level1 Level2 Level3 Level4 Counter DTime[ms] TTime[ms]
==========================================================================================
====================================================================================================
TYPE109 TIME REPORT: (summary) sorted by total time
====================================================================================================
Level0 Level1 Level2 Level3 Level4 Counter TTime[ms] [%]
====================================================================================================
type109 5 0.17E+03 100.00
----------------------------------------------------------------------------------------------------
dataread 1 0.94E+02 54.55
infiletest 1 0.78E+02 45.45
input_init 1 0.00E+00 0.00
inip 1 0.00E+00 0.00
update_time_sun_radiation 3 0.00E+00 0.00
akimaip 39 0.00E+00 0.00
rad_proc 3 0.00E+00 0.00
beamdifftotal 0 0.00E+00 0.00
calc_every_step 3 0.00E+00 0.00
no_radiation 3 0.00E+00 0.00
sloped_surfaces 0 0.00E+00 0.00
suncalc 0 0.00E+00 0.00
====================================================================================================
====================================================================================================
TYPE109 TIME REPORT: (summary) sorted by counter
====================================================================================================
akimaip 39 0.00E+00
type109 5 0.17E+03
rad_proc 3 0.00E+00
update_time_sun_radiation 3 0.00E+00
no_radiation 3 0.00E+00
calc_every_step 3 0.00E+00
input_init 1 0.00E+00
inip 1 0.00E+00
infiletest 1 0.78E+02
dataread 1 0.94E+02
beamdifftotal 0 0.00E+00
sloped_surfaces 0 0.00E+00
suncalc 0 0.00E+00
====================================================================================================
====================================================================================================
TYPE109 TIME REPORT: (summary) sorted by stack level
====================================================================================================
type109 5 0.17E+03
----------------------------------------------------------------------------------------------------
inip 1 0.00E+00
input_init 1 0.00E+00
infiletest 1 0.78E+02
dataread 1 0.94E+02
update_time_sun_radiation 3 0.00E+00
akimaip 39 0.00E+00
rad_proc 3 0.00E+00
beamdifftotal 0 0.00E+00
calc_every_step 3 0.00E+00
no_radiation 3 0.00E+00
sloped_surfaces 0 0.00E+00
suncalc 0 0.00E+00
====================================================================================================
zwischenzeit 1 : 667.683000000000
zwischenzeit 2 : 0.000000000000000E+000
zwischenzeit 3 : 0.000000000000000E+000
zwischenzeit 4 : 0.000000000000000E+000
zwischenzeit 5 : 0.000000000000000E+000
zwischenzeit 6 : 0.000000000000000E+000
zwischenzeit 7 : 0.000000000000000E+000
zwischenzeit 8 : 0.000000000000000E+000
zwischenzeit 9 : 0.000000000000000E+000
zwischenzeit 10 : 0.000000000000000E+000
itest : 4
Summe : 667.683000000000
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 1 did not always sum up to unity. normalized values were used for these timesteps!
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 2 did not always sum up to unity. normalized values were used for these timesteps!
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 3 equal zero occurred. Direct solar radiaton is treated as diffuse radiation!
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 4 did not always sum up to unity. normalized values were used for these timesteps!
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 5 did not always sum up to unity. normalized values were used for these timesteps!
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 6 did not always sum up to unity. normalized values were used for these timesteps!
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 7 did not always sum up to unity. normalized values were used for these timesteps!
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 8 did not always sum up to unity. normalized values were used for these timesteps!
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 9 did not always sum up to unity. normalized values were used for these timesteps!
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 10 did not always sum up to unity. normalized values were used for these timesteps!
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 11 did not always sum up to unity. normalized values were used for these timesteps!
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 12 did not always sum up to unity. normalized values were used for these timesteps!
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 13 did not always sum up to unity. normalized values were used for these timesteps!
*** Notice at time : 1.000000
Generated by Unit : 56
Generated by Type : 56
Message : Geometrical distribution factors for direct solar (GEOSURF) in zone 14 did not always sum up to unity. normalized values were used for these timesteps!
==========================================================================================
TYPE56 TIME REPORT: (for debugging purpose)
------------------------------------------------------------------------------------------
time_report_unit: 6
time_filter: .8760E+07 [ms]
==========================================================================================
Level0 Level1 Level2 Level3 Level4 Counter DTime[ms] TTime[ms]
==========================================================================================
====================================================================================================
TYPE56 TIME REPORT: (summary) sorted by total time
====================================================================================================
Level0 Level1 Level2 Level3 Level4 Counter TTime[ms] [%]
====================================================================================================
type56 6 0.78E+02 100.00
----------------------------------------------------------------------------------------------------
starnetwork 5 0.47E+02 60.00
setup 1 0.16E+02 20.00
INIGLASDATA 1 0.16E+02 20.00
lastcall 1 0.16E+02 20.00
dwindow 156 0.16E+02 20.00
timeva 2 0.00E+00 0.00
regul 0 0.00E+00 0.00
invpar 2 0.00E+00 0.00
outputs 4 0.00E+00 0.00
inidwin 1 0.00E+00 0.00
tabsdwin 312 0.00E+00 0.00
calrdf 5 0.00E+00 0.00
diffeqint 0 0.00E+00 0.00
comfort 0 0.00E+00 0.00
qikft4 11 0.00E+00 0.00
edge 156 0.00E+00 0.00
lambda 978 0.00E+00 0.00
CALHTC 5 0.00E+00 0.00
humcalc 2 0.00E+00 0.00
ak_up 1001 0.00E+00 0.00
STANDOUT 4 0.00E+00 0.00
BALANCES 4 0.00E+00 0.00
COMISOUT 0 0.00E+00 0.00
====================================================================================================
====================================================================================================
TYPE56 TIME REPORT: (summary) sorted by counter
====================================================================================================
ak_up 1001 0.00E+00
lambda 978 0.00E+00
tabsdwin 312 0.00E+00
edge 156 0.00E+00
dwindow 156 0.16E+02
qikft4 11 0.00E+00
type56 6 0.78E+02
calrdf 5 0.00E+00
CALHTC 5 0.00E+00
starnetwork 5 0.47E+02
STANDOUT 4 0.00E+00
BALANCES 4 0.00E+00
outputs 4 0.00E+00
humcalc 2 0.00E+00
invpar 2 0.00E+00
timeva 2 0.00E+00
lastcall 1 0.16E+02
inidwin 1 0.00E+00
INIGLASDATA 1 0.16E+02
setup 1 0.16E+02
regul 0 0.00E+00
diffeqint 0 0.00E+00
comfort 0 0.00E+00
COMISOUT 0 0.00E+00
====================================================================================================
====================================================================================================
TYPE56 TIME REPORT: (summary) sorted by stack level
====================================================================================================
type56 6 0.78E+02
----------------------------------------------------------------------------------------------------
setup 1 0.16E+02
starnetwork 5 0.47E+02
timeva 2 0.00E+00
regul 0 0.00E+00
humcalc 2 0.00E+00
outputs 4 0.00E+00
lastcall 1 0.16E+02
invpar 2 0.00E+00
calrdf 5 0.00E+00
inidwin 1 0.00E+00
tabsdwin 312 0.00E+00
dwindow 156 0.16E+02
diffeqint 0 0.00E+00
comfort 0 0.00E+00
qikft4 11 0.00E+00
edge 156 0.00E+00
lambda 978 0.00E+00
CALHTC 5 0.00E+00
INIGLASDATA 1 0.16E+02
ak_up 1001 0.00E+00
STANDOUT 4 0.00E+00
BALANCES 4 0.00E+00
COMISOUT 0 0.00E+00
====================================================================================================
*********************************************************************************************************
The Following UNIT Numbers, TYPE Numbers, and Logical Units Were Used in the Supplied TRNSYS Input File:
12 2 4
13 3 6
14 11 9
15 33 30
16 56 31
17 65 32
18 69 33
19 109 34
20 557 35
21 668 36
22 37
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
56
69
109
200
331
*********************************************************************************************************
Total TRNSYS Calculation Time: 6.5700 Seconds
TRNSYS Time Breakdown by Unit Number
Unit 109: 0.180000 Seconds
Unit 331: 0.000000 Seconds
Unit 69: 0.000000 Seconds
Unit 200: 0.000000 Seconds
Unit 56: 2.330000 Seconds
Unit 25: 0.000000 Seconds
Unit 12: 0.000000 Seconds
Unit 13: 0.000000 Seconds
Unit 14: 0.000000 Seconds
Unit 15: 0.000000 Seconds
Unit 16: 0.000000 Seconds
Unit 17: 0.000000 Seconds
Unit 18: 0.000000 Seconds
Unit 19: 0.000000 Seconds
Unit 20: 0.000000 Seconds
Unit 21: 0.000000 Seconds
Unit 22: 0.000000 Seconds
Unit 23: 0.000000 Seconds
Unit 24: 0.000000 Seconds
Unit 26: 0.030000 Seconds
Unit 27: 0.000000 Seconds
Unit 28: 0.000000 Seconds
Unit 29: 0.000000 Seconds
Unit 30: 0.000000 Seconds
Unit 31: 0.000000 Seconds
Unit 32: 0.000000 Seconds
Unit 33: 0.000000 Seconds
Unit 34: 0.000000 Seconds
Unit 35: 0.000000 Seconds
Unit 36: 0.000000 Seconds
Unit 37: 0.000000 Seconds
Unit 38: 0.000000 Seconds
Unit 39: 0.000000 Seconds
Unit 40: 0.000000 Seconds
TRNSYS Time Breakdown by Type Number
Type 2: 0.000000 Seconds
Type 3: 0.000000 Seconds
Type 11: 0.000000 Seconds
Type 33: 0.000000 Seconds
Type 56: 2.330000 Seconds
Type 65: 0.000000 Seconds
Type 69: 0.000000 Seconds
Type 109: 0.180000 Seconds
Type 557: 0.000000 Seconds
Type 668: 0.030000 Seconds
Total Calculation Time Inside of the Types: 2.5400 Seconds
TRNSYS Iterative Call Breakdown by Unit Number
Unit 109: 4 Calls
Unit 331: 4 Calls
Unit 69: 4 Calls
Unit 200: 5 Calls
Unit 56: 5 Calls
Unit 25: 3 Calls
Unit 12: 4 Calls
Unit 13: 4 Calls
Unit 14: 4 Calls
Unit 15: 4 Calls
Unit 16: 4 Calls
Unit 17: 4 Calls
Unit 18: 4 Calls
Unit 19: 4 Calls
Unit 20: 4 Calls
Unit 21: 4 Calls
Unit 22: 4 Calls
Unit 23: 4 Calls
Unit 24: 4 Calls
Unit 26: 4 Calls
Unit 27: 4 Calls
Unit 28: 4 Calls
Unit 29: 4 Calls
Unit 30: 4 Calls
Unit 31: 4 Calls
Unit 32: 4 Calls
Unit 33: 4 Calls
Unit 34: 4 Calls
Unit 35: 4 Calls
Unit 36: 4 Calls
Unit 37: 4 Calls
Unit 38: 4 Calls
Unit 39: 4 Calls
Unit 40: 3 Calls
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Simulation log.JPG
Type: image/jpeg
Size: 193848 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120710/400974c0/attachment-0003.jpe>