[TRNSYS-users] hot water distribution

[David BRADLEY]

Eva,
   Your pump model will have one inlet and one outlet. Just after the 
pump, you can use either a combination of Type11s to divert the flow to 
the various floors (each Type11 allows for 2 outlets). If you have the 
TESS Hydronics Library, you can use Type647, which has one inlet and up 
to 100 outputs. In either case, you will probably need to use some 
equations to determine what fraction of the pump's total flow needs to 
go to each of the flow diverter's outlets.
Regards,
  David

On 7/18/2012 20:05, Eva gklezakou wrote:
> Dear Sirs,
>
> I model a building with underfloor heating which get the appropriate 
> hot water from solar collectors. The hot water is stored in a tank and 
> then it is pumped to the building. My query is how can 
> I distribute the water to each zone, I need a pump which has one inlet 
> (flow from tank) and six different outlet (flow to active layer of 
> each zone). Each zone has different need according to its size and so 
> I want to send the needed amount of water in order to control their 
> temperatures.
> Thank you.
>
> Regards,
> Eva
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120719/a680ce46/attachment-0001.htm>