[TRNSYS-users] parabolic trough collectors

[David BRADLEY]

Andrés,
  That algorithm is already built into Type536; you need only change the 
appropriate parameter (collector test mode).
Best,
  David

On 1/9/2012 13:01, ? wrote:
>
> Dear Trnsys users,
>
> I am working on version 16 and I would like to convert parabolic 
> trough collector (Type 536) into a type that uses DT=Tm-Tamb insted of 
> DT=Ti-Tamb. I am looking for formulas which helps me to perform this 
> conversion. The only formulas I have found are the ones used in Solar 
> Engineering of Thermal Processes (Duffie and Beckman) but these 
> formulas are only applied to flat plate collectors. Can these formulas 
> be used in order to perform my work?
>
> I would be glad if somebody can help me.
>
> Best regards,
> Andrés Montero
> CREVER
> Grup d'Enginyeria Tèrmica Aplicada
> Departament d'Enginyeria Mecànica
> Escola Tècnica Superior Enginyeria Química
> Universitat Rovira i Virgili
> Avda. Països Catalans, 26
> 43007 - TARRAGONA (SPAIN)
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120110/59431ec9/attachment-0001.htm>