[TRNSYS-users] Genopt and trnsys16 problem

narghes doust narghes.doust at gmail.com
Thu Feb 23 05:06:38 PST 2012


Dear all,
I have a problem in running optimization with genopt and trnsys16.
I create  .bui and  .dck that works properly, I change the parameters
value with their name in order to create the template files but once I run
genopt, it creates the .bui and .dck files changing the parameter name with
the right value, it starts running trnsyss but I have a trnsys error
message of the kind: "One error was find in the dek. Check the listing file
for more information" and then Genopt stops running. I cannot really
understand why it appens, also because if i compare both .dck
and .bui files that run properly with those generated by Genopt there is no
difference at all (just the value of the parameters). I attach below the
listing file.
Please help me!!!
Thank you
Bye
Narghes



            TRNSYS - the TRaNsient SYstem Simulation program

   The Solar Energy Lab at the University of Wisconsin - Madison, USA
Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France
           Transsolar Energietechnik GmBH, Stuttgart, Germany
        Thermal Energy System Specialists, Madison Wisconsin, USA

                           Release 16.01.0003

Listing file for: "C:\Users\Narghes\Documents\TESI DI
DOTTORATO_CARTELLE\CASI STUDIO\cubo\tmp-genopt-run-1\Simulazione_cubo.dck"

*** Notice at time        :         0.000000
    Generated by Unit     : Not applicable or not available
    Generated by Type     : Not applicable or not available
    Message               : The TRNSYS Executable (TRNExe.exe) and main DLL
(TRNDll.dll) are located in "C:\Program Files\Trnsys16_1\Exe"


 *** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal
errors.

 *** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal
errors found.

 *** Evaluating the EQUATIONs and CONSTANTs to determine their initial
values.

 *** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin
processing the remainder of the TRNSYS input file.

  VERSION        16
*******************************************************************************

*** TRNSYS input file (deck) generated by
TrnsysStudio

*** on Tuesday, February 21, 2012 at
15:18

*** from TrnsysStudio project: C:\Users\Narghes\Documents\TESI DI
DOTTORATO_CARTELLE\CASI
STUDIO\cubo\Simulazione_cubo.tpf

***

*** If you edit this file, use the File/Import TRNSYS Input File function
in

*** TrnsysStudio to update the
project.

***

*** If you have problems, questions or suggestions please contact your
local

*** TRNSYS distributor or mailto:software at cstb.fr <software at cstb.fr>

***

*******************************************************************************

*******************************************************************************

***
Units

*******************************************************************************

*******************************************************************************

*** Control
cards

*******************************************************************************

* START, STOP and
STEP


  CONSTANTS   3
     START=0
     STOP=8760
     STEP=1
* User defined
CONSTANTS

! Start time End time Time
step


  SIMULATION         0.0000000000000000E+00    8.7600000000000000E+03
1.0000000000000000E+00
! Integration
Convergence


  TOLERANCES         1.0000000000000002E-03    1.0000000000000002E-03
! Max iterations Max warnings Trace
limit


  LIMITS        30        30        31
! TRNSYS numerical integration solver
method


  DFQ   1
! TRNSYS output file width, number of
characters


  WIDTH    80
! NOLIST
statement


  LIST
! MAP
statement

! Solver statement Minimum relaxation factor Maximum relaxation
factor


  SOLVER  0
    1.000000000000000
    1.000000000000000
! Nan DEBUG
statement


  NAN_CHECK   0
! Overwrite DEBUG
statement


  OVERWRITE_CHECK   0
! disable time
report


  TIME_REPORT   0
! EQUATION SOLVER
statement


  EQUATION SOLVING METHOD         0
* Model "Type56b" (Type
56)

*


  UNIT   5     TYPE  56
*$UNIT_NAME
Type56b

*$MODEL .\Loads and Structures\Multi-Zone Building\Without Standard Output
Files\Type56b.tmf

*$POSITION 247
210

*$LAYER Main
#

*$#

       PARAMETERS   3
! 1 Logical unit for building description file
(.bui)

! 2 Star network calculation
switch

! 3 Weighting factor for operative
temperature

       3.1000000000000000E+01    0.0000000000000000E+00
5.0000000000000000E-01
       INPUTS   21
! Type15-3:Dry bulb temperature -> 1-
TAMB

! Type15-3:Humidity ratio -> 2-
RELHUMAMB

! Type69b-2:Fictive sky temperature -> 3-
TSKY

! Type15-3:Total tilted surface radiation for surface-3 -> 4-
IT_NORTH

! Type15-3:Total tilted surface radiation for surface-1 -> 5-
IT_SOUTH

! Type15-3:Total tilted surface radiation for surface-2 -> 6-
IT_EAST

! Type15-3:Total tilted surface radiation for surface-4 -> 7-
IT_WEST

! Type15-3:Total horizontal radiation -> 8-
IT_HORIZONTAL

! Type34:Incident receiver radiation -> 9-
IT_SOUTHHADED

! Type15-3:Beam radiation for surface-3 -> 10-
IB_NORTH

! Type15-3:Beam radiation for surface-1 -> 11-
IB_SOUTH

! Type15-3:Beam radiation for surface-2 -> 12-
IB_EAST

! Type15-3:Beam radiation for surface-4 -> 13-
IB_WEST

! Type15-3:Horizontal beam radiation -> 14-
IB_HORIZONTAL

! Type34:Beam radiation on receiver -> 15-
IB_SOUTHHADED

! Type15-3:Angle of incidence for surface-3 -> 16-
AI_NORTH

! Type15-3:Angle of incidence for surface-1 -> 17-
AI_SOUTH

! Type15-3:Angle of incidence for surface-2 -> 18-
AI_EAST

! Type15-3:Angle of incidence for surface-4 -> 19-
AI_WEST

! Type15-3:Angle of incidence for horizontal -> 20-
AI_HORIZONTAL

! Type34:Angle of incidence -> 21-
AI_SOUTHHADED

       15,1                      15,6
17,1                      15,26                     15,24
       15,25                     15,27
15,18                     14,1                      15,30
       15,28                     15,29
15,31                     15,19                     14,2
       15,46                     15,44
15,45                     15,47                     15,23
       14,12
*** INITIAL INPUT
VALUES

       0.0000000000000000E+00    0.0000000000000000E+00
0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00
       0.0000000000000000E+00    0.0000000000000000E+00
0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00
       0.0000000000000000E+00    0.0000000000000000E+00
0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00
       0.0000000000000000E+00    0.0000000000000000E+00
0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00
       0.0000000000000000E+00
*** External
files

  ASSIGN cubo.bui   31
*|? Building description file (*.bui)
|1000

*------------------------------------------------------------------------------

* Model "Type34" (Type
34)

*


  UNIT  14     TYPE  34
*$UNIT_NAME
Type34

*$MODEL .\Loads and Structures\Overhang and Wingwall
Shading\Type34.tmf

*$POSITION 243
370

*$LAYER Main
#

       PARAMETERS  16
! 1 Upstream component
mode

! 2 Receiver
height

! 3 Receiver
width

! 4 Overhang
projection

! 5 Overhang
gap

! 6 Overhang left
extension

! 7 Overhang right
extension

! 8 Left wingwall
projection

! 9 Left wingwall
gap

! 10 Left wingwall top
extension

! 11 Left wingwall bottom
extension

! 12 Right wingwall
projection

! 13 Right wingwall
gap

! 14 Right wingwall top
extension

! 15 Right wingwall bottom
extension

! 16 Receiver
azimuth

       0.0000000000000000E+00    1.0000000000000000E+00
0.0000000000000000E+00    1.0000000000000000E+00    0.0000000000000000E+00
       1.5000000000000000E+00    1.2000000000000000E+00
0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00
       0.0000000000000000E+00    0.0000000000000000E+00
0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00
       0.0000000000000000E+00
       INPUTS    7
! Type15-3:Solar zenith angle ->Solar zenith
angle

! Type15-3:Solar azimuth angle ->Solar azimuth
angle

! Type15-3:Total horizontal radiation ->Total horizontal
radiation

! Type15-3:Horizontal beam radiation ->Horizontal diffuse
radiation

! Type15-3:Beam radiation for surface-1 ->Beam radiation on
surface

! Type15-3:Ground reflectance ->Ground
reflectance

! Type15-3:Angle of incidence for surface-1 ->Incidence angle of direct
radiation

       15,16                     15,17
15,18                     15,19                     15,28
       15,83                     15,44
*** INITIAL INPUT
VALUES

       9.0000000000000000E+01    0.0000000000000000E+00
0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00
       2.0000000000000001E-01    0.0000000000000000E+00
*------------------------------------------------------------------------------

* Model "Type15-3" (Type
15)

*


  UNIT  15     TYPE  15
*$UNIT_NAME
Type15-3

*$MODEL .\Weather Data Reading and Processing\Standard Format\Energy+
Weather Files
(EPW)\Type15-3.tmf

*$POSITION 355
296

*$LAYER Weather - Data Files
#

       PARAMETERS  18
! 1 File
Type

! 2 Logical
unit

! 3 Tilted Surface Radiation
Mode

! 4 Ground reflectance - no
snow

! 5 Ground reflectance - snow
cover

! 6 Number of
surfaces

! 7 Tracking
mode-1

! 8 Slope of
surface-1

! 9 Azimuth of
surface-1

! 10 Tracking
mode-2

! 11 Slope of
surface-2

! 12 Azimuth of
surface-2

! 13 Tracking
mode-3

! 14 Slope of
surface-3

! 15 Azimuth of
surface-3

! 16 Tracking
mode-4

! 17 Slope of
surface-4

! 18 Azimuth of
surface-4

       3.0000000000000000E+00    3.3000000000000000E+01
3.0000000000000000E+00    2.0000000000000001E-01    7.0000000000000007E-01
       4.0000000000000000E+00    1.0000000000000000E+00
9.0000000000000000E+01    0.0000000000000000E+00    1.0000000000000000E+00
       9.0000000000000000E+01   -9.0000000000000000E+01
1.0000000000000000E+00    9.0000000000000000E+01   -1.8000000000000000E+02
       1.0000000000000000E+00    9.0000000000000000E+01
9.0000000000000000E+01
*** External
files

  ASSIGN ITA_Bergamo-Orio.al.Serio.160760_IGDG.epw   33
*|? Which file contains the Energy+ weather data?
|1000

*------------------------------------------------------------------------------

* Model "Type33e-3" (Type
33)

*


  UNIT  16     TYPE  33
*$UNIT_NAME
Type33e-3

*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry
Bulb and Relative Humidity
Known\Type33e.tmf

*$POSITION 460
197

*$LAYER Main
#

       PARAMETERS   3
! 1 Psychrometrics
mode

! 2 Wet bulb
mode

! 3 Error
mode

       2.0000000000000000E+00    1.0000000000000000E+00
2.0000000000000000E+00
       INPUTS    3
! Type15-3:Dry bulb temperature ->Dry bulb
temp.

! Type15-3:Percent relative humidity ->Percent relative
humidity

! [unconnected]
Pressure

       15,1                      15,7
CONST
*** INITIAL INPUT
VALUES

       2.2000000000000000E+01    6.0000000000000000E+01
1.0000000000000000E+00
*------------------------------------------------------------------------------

* Model "Type69b-2" (Type
69)

*


  UNIT  17     TYPE  69
*$UNIT_NAME
Type69b-2

*$MODEL .\Physical Phenomena\Sky Temperature\calculate cloudiness
factor\Type69b.tmf

*$POSITION 459
391

*$LAYER Main
#

       PARAMETERS   2
! 1 mode for cloudiness
factor

! 2 height over sea
level

       0.0000000000000000E+00    0.0000000000000000E+00
       INPUTS    4
! Type15-3:Dry bulb temperature ->Ambient
temperature

! Type33e-3:Dew point temperature. ->Dew point temperature at ambient
conditions

! Type15-3:Horizontal beam radiation ->Beam radiation on the
horizontal

! Type15-3:Sky diffuse radiation on the horizontal ->Diffuse radiation on
the
horizontal

       15,1                      16,8
15,19                     15,20
*** INITIAL INPUT
VALUES

       0.0000000000000000E+00    2.0000000000000000E+01
0.0000000000000000E+00    0.0000000000000000E+00
*------------------------------------------------------------------------------

* Model "Type65d" (Type
65)

*


  UNIT  19     TYPE  65
*$UNIT_NAME
Type65d

*$MODEL .\Output\Online Plotter\Online Plotter Without
File\Type65d.tmf

*$POSITION 653
285

*$LAYER Main
#

       PARAMETERS  12
! 1 Nb. of left-axis
variables

! 2 Nb. of right-axis
variables

! 3 Left axis
minimum

! 4 Left axis
maximum

! 5 Right axis
minimum

! 6 Right axis
maximum

! 7 Number of plots per
simulation

! 8 X-axis
gridpoints

! 9 Shut off Online w/o
removing

! 10 Logical unit for output
file

! 11 Output file
units

! 12 Output file
delimiter

       1.0000000000000000E+00    2.0000000000000000E+00
0.0000000000000000E+00    3.0000000000000000E+01    0.0000000000000000E+00
       1.0000000000000000E+03    1.0000000000000000E+00
1.2000000000000000E+01    0.0000000000000000E+00   -1.0000000000000000E+00
       0.0000000000000000E+00    0.0000000000000000E+00
       INPUTS    3
! Type56b: 1- TAIR_Z1 ->Left axis
variable

! Type56b: 2- QHEAT_Z1 ->Right axis
variable-1

! Type56b: 3- QCOOL_Z1 ->Right axis
variable-2

       5,1                       5,2
5,3
*** INITIAL INPUT
VALUES

       T_PT
Q_HEAT
Q_COOL
       LABELS  3

Temperatures

       Heat transfer
rates

       Graph
1

*------------------------------------------------------------------------------

* Model "Type28b" (Type
28)

*


  UNIT  21     TYPE  28
*$UNIT_NAME
Type28b

*$MODEL .\Output\Simulation Summary\Results to External File\Without Energy
Balance\Type28b.tmf

*$POSITION 439
402

*$LAYER Outputs
#

       PARAMETERS  22
! 1 Summary
interval

! 2 Summary start
time

! 3 Summary stop
time

! 4 Logical unit for the output
file

! 5 Output
mode

! 6 Operation
code-1

! 7 Operation
code-2

! 8 Operation
code-3

! 9 Operation
code-4

! 10 Operation
code-5

! 11 Operation
code-6

! 12 Operation
code-7

! 13 Operation
code-8

! 14 Operation
code-9

! 15 Operation
code-10

! 16 Operation
code-11

! 17 Operation
code-12

! 18 Operation
code-13

! 19 Operation
code-14

! 20 Operation
code-15

! 21 Operation
code-16

! 22 Operation
code-17

      -1.0000000000000000E+00    0.0000000000000000E+00
8.7600000000000000E+03    3.4000000000000000E+01    2.0000000000000000E+00
      -1.1000000000000000E+01   -1.2000000000000000E+01
3.0000000000000000E+00   -1.0000000000000000E+00    3.6000000000000000E+03
       2.0000000000000000E+00   -4.0000000000000000E+00
-1.1000000000000000E+01   -1.0000000000000000E+00    3.6000000000000000E+03
       2.0000000000000000E+00   -4.0000000000000000E+00
-1.2000000000000000E+01   -1.0000000000000000E+00    3.6000000000000000E+03
       2.0000000000000000E+00   -4.0000000000000000E+00
       INPUTS    2
! Type56b: 2- QHEAT_Z1 ->Summary
input-1

! Type56b: 3- QCOOL_Z1 ->Summary
input-2

       5,2                       5,3
*** INITIAL INPUT
VALUES

       0.0000000000000000E+00    0.0000000000000000E+00
       LABELS  3

Qvent


Qheat


Qcool

*** External
files

  ASSIGN pippo.sum   34
*|? File for the summary results
|1000

*------------------------------------------------------------------------------

* EQUATIONS
"Parameters"

*


  EQUATIONS   2
     windowHeight = 1.0
     overhangProjection = 1.0
*$UNIT_NAME
Parameters

*$LAYER
Main

*$POSITION 152
114

*------------------------------------------------------------------------------


  END


         TRANSIENT SIMULATION     STARTING AT TIME =  0.0000000000000000E+00
                                  STOPPING AT TIME =  8.7600000000000000E+03
                                          TIMESTEP =         1 /        1
             DIFFERENTIAL EQUATION ERROR TOLERANCE =  1.0000000000000002E-03
                   ALGEBRAIC CONVERGENCE TOLERANCE =  1.0000000000000002E-03

     DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER

*** Notice at time        :         0.000000
    Generated by Unit     : Not applicable or not available
    Generated by Type     : Not applicable or not available
    Message               : The following Types were loaded from
TRNDll.dll: Type56, Type34, Type15, Type33, Type69, Type65, Type28


*** Notice at time        :         0.000000
    Generated by Unit     : Not applicable or not available
    Generated by Type     : Not applicable or not available
    Message               : "Type157_demo_release.dll" was found but did
not contain any components from the input file.


*** Notice at time        :         0.000000
    Generated by Unit     : Not applicable or not available
    Generated by Type     : Not applicable or not available
    Message               : "Type204_release.dll" was found but did not
contain any components from the input file.


*** Notice at time        :         0.000000
    Generated by Unit     : Not applicable or not available
    Generated by Type     : Not applicable or not available
    TRNSYS Message    199 : TRNSYS found at least one user DLL in the
UserLib directory. (Note: Only DLL's including Types that are used in the
simulation are loaded)
    Reported information  : 0 user DLLs were loaded after searching in
"C:\Program Files\Trnsys16_1\UserLib\ReleaseDLLs"


*** Notice at time        :         0.000000
    Generated by Unit     :     5
    Generated by Type     :    56
    Message               : TRNFLOW multi zone air flow model  integrated


*** Notice at time        :         0.000000
    Generated by Unit     :     5
    Generated by Type     :    56
    Message               : Active layers and internal window calculations
integrated


*** Notice at time        :         0.000000
    Generated by Unit     :     5
    Generated by Type     :    56
    Message               : No internal humidity calculations are
performed and no condensation warnings are printed. if any  of the outputs
ntype 9,10,11,26,29,40,41,47,48 or 49 is specified The humidity
calculations, using an internal timestep, will be switched on and
condensation checks are performed


*** Notice at time        :         0.000000
    Generated by Unit     :     5
    Generated by Type     :    56
    Message               : Star network calculation: only at simulation
start


*** Fatal Error at time   :         0.000000
    Generated by Unit     :    15
    Generated by Type     :    15
    Message               : Unable to correctly read from the supplied data
file - please check the file and re-run the simulation.


*** Notice at time        :         0.000000
    Generated by Unit     :     5
    Generated by Type     :    56
    Message               : Geometrical distribution factors for direct
solar (GEOSURF) in zone   1 equal zero occurred. Direct solar   radiaton is
treated as diffuse radiation!

==========================================================================================
TYPE56 TIME REPORT: (for debugging purpose)
------------------------------------------------------------------------------------------
time_report_unit:   6
time_filter:       .8760E+07 [ms]
==========================================================================================
Level0      Level1      Level2      Level3      Level4        Counter
DTime[ms]  TTime[ms]
==========================================================================================


*********************************************************************************************************
The Following UNIT Numbers, TYPE Numbers, and Logical Units Were Used in
the Supplied TRNSYS Input File:
                         5            15                 4
                        14            28                 6
                        15            33                 9
                        16            34                31
                        17            56                33
                        19            65                34
                        21            69                35


*********************************************************************************************************
Total TRNSYS Calculation Time:                          1.7500 Seconds
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120223/0eb125ae/attachment-0005.htm>


More information about the TRNSYS-users mailing list