<div>Dear all,</div>
<div>I have a problem in running optimization with genopt and trnsys16.</div>
<div>I create  .bui and  .dck that works properly, I change the parameters value with their name in order to create the template files but once I run genopt, it creates the .bui and .dck files changing the parameter name with the right value, it starts running trnsyss but I have a trnsys error message of the kind: "One error was find in the dek. Check the listing file for more information" and then Genopt stops running. I cannot really understand why it appens, also because if i compare both .dck and .bui files that run properly with those generated by Genopt there is no difference at all (just the value of the parameters). I attach below the listing file.</div>

<div>Please help me!!!</div>
<div>Thank you</div>
<div>Bye</div>
<div>Narghes</div>
<div> </div>
<p><br>            TRNSYS - the TRaNsient SYstem Simulation program</p>
<p>   The Solar Energy Lab at the University of Wisconsin - Madison, USA<br>Le Centre Scientifique et Technique du Batiment, Sophia Antipolis, France<br>           Transsolar Energietechnik GmBH, Stuttgart, Germany<br>        Thermal Energy System Specialists, Madison Wisconsin, USA</p>

<p>                           Release 16.01.0003</p>
<p>Listing file for: "C:\Users\Narghes\Documents\TESI DI DOTTORATO_CARTELLE\CASI STUDIO\cubo\tmp-genopt-run-1\Simulazione_cubo.dck"<br> <br>*** Notice at time        :         0.000000<br>    Generated by Unit     : Not applicable or not available<br>
    Generated by Type     : Not applicable or not available<br>    Message               : The TRNSYS Executable (TRNExe.exe) and main DLL (TRNDll.dll) are located in "C:\Program Files\Trnsys16_1\Exe"<br> </p>
<p> *** Pre-Processing the TRNSYS EQUATIONs and CONSTANTs to check for fatal errors.</p>
<p> *** Pre-Processing of EQUATIONs and CONSTANTs completed with no fatal errors found.</p>
<p> *** Evaluating the EQUATIONs and CONSTANTs to determine their initial values.</p>
<p> *** Finished evaluating the EQUATIONs and CONSTANTs and ready to begin processing the remainder of the TRNSYS input file.</p>
<p>  VERSION        16<br>*******************************************************************************                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
*** TRNSYS input file (deck) generated by TrnsysStudio                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  <br>
*** on Tuesday, February 21, 2012 at 15:18                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
*** from TrnsysStudio project: C:\Users\Narghes\Documents\TESI DI DOTTORATO_CARTELLE\CASI STUDIO\cubo\Simulazione_cubo.tpf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
***                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     <br>
*** If you edit this file, use the File/Import TRNSYS Input File function in                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            <br>
*** TrnsysStudio to update the project.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 <br>
***                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     <br>
*** If you have problems, questions or suggestions please contact your local                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            <br>
*** TRNSYS distributor or <a href="mailto:software@cstb.fr">mailto:software@cstb.fr</a>                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <br>
***                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     <br>
*******************************************************************************                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
*******************************************************************************                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
*** Units                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
*******************************************************************************                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
*******************************************************************************                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
*** Control cards                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <br>
*******************************************************************************                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
* START, STOP and STEP                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  </p>

<p>  CONSTANTS   3<br>     START=0<br>     STOP=8760<br>     STEP=1<br>* User defined CONSTANTS                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
! Start time End time Time step                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          </p>

<p>  SIMULATION         0.0000000000000000E+00    8.7600000000000000E+03    1.0000000000000000E+00<br>! Integration  Convergence                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     </p>

<p>  TOLERANCES         1.0000000000000002E-03    1.0000000000000002E-03<br>! Max iterations Max warnings Trace limit                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            </p>

<p>  LIMITS        30        30        31<br>! TRNSYS numerical integration solver method                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  </p>

<p>  DFQ   1<br>! TRNSYS output file width, number of characters                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            </p>

<p>  WIDTH    80<br>! NOLIST statement                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            </p>

<p>  LIST<br>! MAP statement                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    <br>
! Solver statement Minimum relaxation factor Maximum relaxation factor                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  </p>

<p>  SOLVER  0<br>    1.000000000000000    <br>    1.000000000000000    <br>! Nan DEBUG statement                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    </p>

<p>  NAN_CHECK   0<br>! Overwrite DEBUG statement                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         </p>

<p>  OVERWRITE_CHECK   0<br>! disable time report                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   </p>

<p>  TIME_REPORT   0<br>! EQUATION SOLVER statement                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               </p>

<p>  EQUATION SOLVING METHOD         0<br>* Model "Type56b" (Type 56)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
*                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       </p>

<p>  UNIT   5     TYPE  56                                                   <br>*$UNIT_NAME Type56b                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     <br>
*$MODEL .\Loads and Structures\Multi-Zone Building\Without Standard Output Files\Type56b.tmf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            <br>
*$POSITION 247 210                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
*$LAYER Main #                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
*$#                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     <br>
       PARAMETERS   3<br>! 1 Logical unit for building description file (.bui)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
! 2 Star network calculation switch                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  <br>
! 3 Weighting factor for operative temperature                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    <br>
       3.1000000000000000E+01    0.0000000000000000E+00    5.0000000000000000E-01<br>       INPUTS   21<br>! Type15-3:Dry bulb temperature -> 1- TAMB                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <br>
! Type15-3:Humidity ratio -> 2- RELHUMAMB                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        <br>
! Type69b-2:Fictive sky temperature -> 3- TSKY                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   <br>
! Type15-3:Total tilted surface radiation for surface-3 -> 4- IT_NORTH                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
! Type15-3:Total tilted surface radiation for surface-1 -> 5- IT_SOUTH                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
! Type15-3:Total tilted surface radiation for surface-2 -> 6- IT_EAST                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           <br>
! Type15-3:Total tilted surface radiation for surface-4 -> 7- IT_WEST                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           <br>
! Type15-3:Total horizontal radiation -> 8- IT_HORIZONTAL                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <br>
! Type34:Incident receiver radiation -> 9- IT_SOUTHHADED                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
! Type15-3:Beam radiation for surface-3 -> 10- IB_NORTH                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
! Type15-3:Beam radiation for surface-1 -> 11- IB_SOUTH                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
! Type15-3:Beam radiation for surface-2 -> 12- IB_EAST                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
! Type15-3:Beam radiation for surface-4 -> 13- IB_WEST                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
! Type15-3:Horizontal beam radiation -> 14- IB_HORIZONTAL                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <br>
! Type34:Beam radiation on receiver -> 15- IB_SOUTHHADED                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
! Type15-3:Angle of incidence for surface-3 -> 16- AI_NORTH                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     <br>
! Type15-3:Angle of incidence for surface-1 -> 17- AI_SOUTH                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     <br>
! Type15-3:Angle of incidence for surface-2 -> 18- AI_EAST                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
! Type15-3:Angle of incidence for surface-4 -> 19- AI_WEST                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
! Type15-3:Angle of incidence for horizontal -> 20- AI_HORIZONTAL                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
! Type34:Angle of incidence -> 21- AI_SOUTHHADED                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
       15,1                      15,6                      17,1                      15,26                     15,24               <br>       15,25                     15,27                     15,18                     14,1                      15,30               <br>
       15,28                     15,29                     15,31                     15,19                     14,2                <br>       15,46                     15,44                     15,45                     15,47                     15,23               <br>
       14,12               <br>*** INITIAL INPUT VALUES                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
       0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00<br>       0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00<br>
       0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00<br>       0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00<br>
       0.0000000000000000E+00<br>*** External files                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
  ASSIGN cubo.bui   31<br>*|? Building description file (*.bui) |1000                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
*------------------------------------------------------------------------------                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
* Model "Type34" (Type 34)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
*                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       </p>

<p>  UNIT  14     TYPE  34                                                   <br>*$UNIT_NAME Type34                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
*$MODEL .\Loads and Structures\Overhang and Wingwall Shading\Type34.tmf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 <br>
*$POSITION 243 370                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
*$LAYER Main #                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
       PARAMETERS  16<br>! 1 Upstream component mode                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
! 2 Receiver height                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <br>
! 3 Receiver width                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   <br>
! 4 Overhang projection                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
! 5 Overhang gap                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     <br>
! 6 Overhang left extension                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        <br>
! 7 Overhang right extension                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <br>
! 8 Left wingwall projection                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
! 9 Left wingwall gap                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
! 10 Left wingwall top extension                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     <br>
! 11 Left wingwall bottom extension                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  <br>
! 12 Right wingwall projection                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <br>
! 13 Right wingwall gap                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
! 14 Right wingwall top extension                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    <br>
! 15 Right wingwall bottom extension                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 <br>
! 16 Receiver azimuth                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
       0.0000000000000000E+00    1.0000000000000000E+00    0.0000000000000000E+00    1.0000000000000000E+00    0.0000000000000000E+00<br>       1.5000000000000000E+00    1.2000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00<br>
       0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00<br>       0.0000000000000000E+00<br>       INPUTS    7<br>! Type15-3:Solar zenith angle ->Solar zenith angle                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
! Type15-3:Solar azimuth angle ->Solar azimuth angle                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            <br>
! Type15-3:Total horizontal radiation ->Total horizontal radiation                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
! Type15-3:Horizontal beam radiation ->Horizontal diffuse radiation                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
! Type15-3:Beam radiation for surface-1 ->Beam radiation on surface                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
! Type15-3:Ground reflectance ->Ground reflectance                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
! Type15-3:Angle of incidence for surface-1 ->Incidence angle of direct radiation                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
       15,16                     15,17                     15,18                     15,19                     15,28               <br>       15,83                     15,44               <br>*** INITIAL INPUT VALUES                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
       9.0000000000000000E+01    0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00    0.0000000000000000E+00<br>       2.0000000000000001E-01    0.0000000000000000E+00<br>*------------------------------------------------------------------------------                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
* Model "Type15-3" (Type 15)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            <br>
*                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       </p>

<p>  UNIT  15     TYPE  15                                                   <br>*$UNIT_NAME Type15-3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    <br>
*$MODEL .\Weather Data Reading and Processing\Standard Format\Energy+ Weather Files (EPW)\Type15-3.tmf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  <br>
*$POSITION 355 296                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
*$LAYER Weather - Data Files #                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
       PARAMETERS  18<br>! 1 File Type                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        <br>
! 2 Logical unit                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    <br>
! 3 Tilted Surface Radiation Mode                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    <br>
! 4 Ground reflectance - no snow                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   <br>
! 5 Ground reflectance - snow cover                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
! 6 Number of surfaces                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
! 7 Tracking mode-1                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  <br>
! 8 Slope of surface-1                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
! 9 Azimuth of surface-1                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
! 10 Tracking mode-2                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 <br>
! 11 Slope of surface-2                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
! 12 Azimuth of surface-2                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
! 13 Tracking mode-3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 <br>
! 14 Slope of surface-3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
! 15 Azimuth of surface-3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
! 16 Tracking mode-4                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 <br>
! 17 Slope of surface-4                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
! 18 Azimuth of surface-4                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           <br>
       3.0000000000000000E+00    3.3000000000000000E+01    3.0000000000000000E+00    2.0000000000000001E-01    7.0000000000000007E-01<br>       4.0000000000000000E+00    1.0000000000000000E+00    9.0000000000000000E+01    0.0000000000000000E+00    1.0000000000000000E+00<br>
       9.0000000000000000E+01   -9.0000000000000000E+01    1.0000000000000000E+00    9.0000000000000000E+01   -1.8000000000000000E+02<br>       1.0000000000000000E+00    9.0000000000000000E+01    9.0000000000000000E+01<br>
*** External files                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
  ASSIGN ITA_Bergamo-Orio.al.Serio.160760_IGDG.epw   33<br>*|? Which file contains the Energy+ weather data? |1000                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 <br>
*------------------------------------------------------------------------------                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
* Model "Type33e-3" (Type 33)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           <br>
*                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       </p>

<p>  UNIT  16     TYPE  33                                                   <br>*$UNIT_NAME Type33e-3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   <br>
*$MODEL .\Physical Phenomena\Thermodynamic Properties\Psychrometrics\Dry Bulb and Relative Humidity Known\Type33e.tmf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   <br>
*$POSITION 460 197                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
*$LAYER Main #                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
       PARAMETERS   3<br>! 1 Psychrometrics mode                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
! 2 Wet bulb mode                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    <br>
! 3 Error mode                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <br>
       2.0000000000000000E+00    1.0000000000000000E+00    2.0000000000000000E+00<br>       INPUTS    3<br>! Type15-3:Dry bulb temperature ->Dry bulb temp.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 <br>
! Type15-3:Percent relative humidity ->Percent relative humidity                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 <br>
! [unconnected] Pressure                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           <br>
       15,1                      15,7                      CONST               <br>*** INITIAL INPUT VALUES                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
       2.2000000000000000E+01    6.0000000000000000E+01    1.0000000000000000E+00<br>*------------------------------------------------------------------------------                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
* Model "Type69b-2" (Type 69)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           <br>
*                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       </p>

<p>  UNIT  17     TYPE  69                                                   <br>*$UNIT_NAME Type69b-2                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   <br>
*$MODEL .\Physical Phenomena\Sky Temperature\calculate cloudiness factor\Type69b.tmf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    <br>
*$POSITION 459 391                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
*$LAYER Main #                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
       PARAMETERS   2<br>! 1 mode for cloudiness factor                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <br>
! 2 height over sea level                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            <br>
       0.0000000000000000E+00    0.0000000000000000E+00<br>       INPUTS    4<br>! Type15-3:Dry bulb temperature ->Ambient temperature                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            <br>
! Type33e-3:Dew point temperature. ->Dew point temperature at ambient conditions                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 <br>
! Type15-3:Horizontal beam radiation ->Beam radiation on the horizontal                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
! Type15-3:Sky diffuse radiation on the horizontal ->Diffuse radiation on the horizontal                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        <br>
       15,1                      16,8                      15,19                     15,20               <br>*** INITIAL INPUT VALUES                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
       0.0000000000000000E+00    2.0000000000000000E+01    0.0000000000000000E+00    0.0000000000000000E+00<br>*------------------------------------------------------------------------------                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
* Model "Type65d" (Type 65)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
*                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       </p>

<p>  UNIT  19     TYPE  65                                                   <br>*$UNIT_NAME Type65d                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     <br>
*$MODEL .\Output\Online Plotter\Online Plotter Without File\Type65d.tmf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 <br>
*$POSITION 653 285                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
*$LAYER Main #                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
       PARAMETERS  12<br>! 1 Nb. of left-axis variables                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <br>
! 2 Nb. of right-axis variables                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
! 3 Left axis minimum                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
! 4 Left axis maximum                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
! 5 Right axis minimum                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
! 6 Right axis maximum                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
! 7 Number of plots per simulation                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   <br>
! 8 X-axis gridpoints                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
! 9 Shut off Online w/o removing                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     <br>
! 10 Logical unit for output file                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   <br>
! 11 Output file units                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
! 12 Output file delimiter                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           <br>
       1.0000000000000000E+00    2.0000000000000000E+00    0.0000000000000000E+00    3.0000000000000000E+01    0.0000000000000000E+00<br>       1.0000000000000000E+03    1.0000000000000000E+00    1.2000000000000000E+01    0.0000000000000000E+00   -1.0000000000000000E+00<br>
       0.0000000000000000E+00    0.0000000000000000E+00<br>       INPUTS    3<br>! Type56b: 1- TAIR_Z1 ->Left axis variable                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        <br>
! Type56b: 2- QHEAT_Z1 ->Right axis variable-1                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    <br>
! Type56b: 3- QCOOL_Z1 ->Right axis variable-2                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    <br>
       5,1                       5,2                       5,3                 <br>*** INITIAL INPUT VALUES                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
       T_PT                                     Q_HEAT                                   Q_COOL                                   <br>       LABELS  3<br>       Temperatures                                                                                                                                                                                                                                                                                                <br>
       Heat transfer rates                                                                                                                                                                                                                                                                                         <br>
       Graph 1                                                                                                                                                                                                                                                                                                     <br>
*------------------------------------------------------------------------------                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
* Model "Type28b" (Type 28)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
*                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       </p>

<p>  UNIT  21     TYPE  28                                                   <br>*$UNIT_NAME Type28b                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     <br>
*$MODEL .\Output\Simulation Summary\Results to External File\Without Energy Balance\Type28b.tmf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
*$POSITION 439 402                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
*$LAYER Outputs #                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       <br>
       PARAMETERS  22<br>! 1 Summary interval                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
! 2 Summary start time                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           <br>
! 3 Summary stop time                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
! 4 Logical unit for the output file                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
! 5 Output mode                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
! 6 Operation code-1                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
! 7 Operation code-2                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
! 8 Operation code-3                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 <br>
! 9 Operation code-4                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
! 10 Operation code-5                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
! 11 Operation code-6                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
! 12 Operation code-7                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
! 13 Operation code-8                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
! 14 Operation code-9                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
! 15 Operation code-10                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            <br>
! 16 Operation code-11                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
! 17 Operation code-12                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
! 18 Operation code-13                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             <br>
! 19 Operation code-14                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
! 20 Operation code-15                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            <br>
! 21 Operation code-16                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               <br>
! 22 Operation code-17                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              <br>
      -1.0000000000000000E+00    0.0000000000000000E+00    8.7600000000000000E+03    3.4000000000000000E+01    2.0000000000000000E+00<br>      -1.1000000000000000E+01   -1.2000000000000000E+01    3.0000000000000000E+00   -1.0000000000000000E+00    3.6000000000000000E+03<br>
       2.0000000000000000E+00   -4.0000000000000000E+00   -1.1000000000000000E+01   -1.0000000000000000E+00    3.6000000000000000E+03<br>       2.0000000000000000E+00   -4.0000000000000000E+00   -1.2000000000000000E+01   -1.0000000000000000E+00    3.6000000000000000E+03<br>
       2.0000000000000000E+00   -4.0000000000000000E+00<br>       INPUTS    2<br>! Type56b: 2- QHEAT_Z1 ->Summary input-1                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
! Type56b: 3- QCOOL_Z1 ->Summary input-2                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          <br>
       5,2                       5,3                 <br>*** INITIAL INPUT VALUES                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
       0.0000000000000000E+00    0.0000000000000000E+00<br>       LABELS  3<br>       Qvent                                                                                                                                                                                                                                                                                                       <br>
       Qheat                                                                                                                                                                                                                                                                                                       <br>
       Qcool                                                                                                                                                                                                                                                                                                       <br>
*** External files                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
  ASSIGN pippo.sum   34<br>*|? File for the summary results |1000                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  <br>
*------------------------------------------------------------------------------                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         <br>
* EQUATIONS "Parameters"                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                <br>
*                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       </p>

<p>  EQUATIONS   2<br>     windowHeight = 1.0<br>     overhangProjection = 1.0<br>*$UNIT_NAME Parameters                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  <br>
*$LAYER Main                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            <br>
*$POSITION 152 114                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      <br>
*------------------------------------------------------------------------------                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         </p>

<p>  END</p>
<p><br>         TRANSIENT SIMULATION     STARTING AT TIME =  0.0000000000000000E+00<br>                                  STOPPING AT TIME =  8.7600000000000000E+03<br>                                          TIMESTEP =         1 /        1<br>
             DIFFERENTIAL EQUATION ERROR TOLERANCE =  1.0000000000000002E-03<br>                   ALGEBRAIC CONVERGENCE TOLERANCE =  1.0000000000000002E-03</p>
<p>     DIFFERENTIAL EQUATIONS SOLVED BY MODIFIED EULER   <br> <br>*** Notice at time        :         0.000000<br>    Generated by Unit     : Not applicable or not available<br>    Generated by Type     : Not applicable or not available<br>
    Message               : The following Types were loaded from TRNDll.dll: Type56, Type34, Type15, Type33, Type69, Type65, Type28<br> <br> <br>*** Notice at time        :         0.000000<br>    Generated by Unit     : Not applicable or not available<br>
    Generated by Type     : Not applicable or not available<br>    Message               : "Type157_demo_release.dll" was found but did not contain any components from the input file.<br> <br> <br>*** Notice at time        :         0.000000<br>
    Generated by Unit     : Not applicable or not available<br>    Generated by Type     : Not applicable or not available<br>    Message               : "Type204_release.dll" was found but did not contain any components from the input file.<br>
 <br> <br>*** Notice at time        :         0.000000<br>    Generated by Unit     : Not applicable or not available<br>    Generated by Type     : Not applicable or not available<br>    TRNSYS Message    199 : TRNSYS found at least one user DLL in the UserLib directory. (Note: Only DLL's including Types that are used in the simulation are loaded)<br>
    Reported information  : 0 user DLLs were loaded after searching in "C:\Program Files\Trnsys16_1\UserLib\ReleaseDLLs"<br> <br> <br>*** Notice at time        :         0.000000<br>    Generated by Unit     :     5<br>
    Generated by Type     :    56<br>    Message               : TRNFLOW multi zone air flow model  integrated<br> <br> <br>*** Notice at time        :         0.000000<br>    Generated by Unit     :     5<br>    Generated by Type     :    56<br>
    Message               : Active layers and internal window calculations integrated<br> <br> <br>*** Notice at time        :         0.000000<br>    Generated by Unit     :     5<br>    Generated by Type     :    56<br>
    Message               : No internal humidity calculations are  performed and no condensation warnings are printed. if any  of the outputs ntype 9,10,11,26,29,40,41,47,48 or 49 is specified The humidity calculations, using an internal timestep, will be switched on and condensation checks are performed<br>
 <br> <br>*** Notice at time        :         0.000000<br>    Generated by Unit     :     5<br>    Generated by Type     :    56<br>    Message               : Star network calculation: only at simulation start<br> <br> <br>
*** Fatal Error at time   :         0.000000<br>    Generated by Unit     :    15<br>    Generated by Type     :    15<br>    Message               : Unable to correctly read from the supplied data file - please check the file and re-run the simulation.<br>
 <br> <br>*** Notice at time        :         0.000000<br>    Generated by Unit     :     5<br>    Generated by Type     :    56<br>    Message               : Geometrical distribution factors for direct solar (GEOSURF) in zone   1 equal zero occurred. Direct solar   radiaton is treated as diffuse radiation!<br>
 <br>==========================================================================================<br>TYPE56 TIME REPORT: (for debugging purpose)<br>------------------------------------------------------------------------------------------<br>
time_report_unit:   6<br>time_filter:       .8760E+07 [ms]<br>==========================================================================================<br>Level0      Level1      Level2      Level3      Level4        Counter DTime[ms]  TTime[ms]<br>
==========================================================================================</p>
<p><br>*********************************************************************************************************<br>The Following UNIT Numbers, TYPE Numbers, and Logical Units Were Used in the Supplied TRNSYS Input File: <br>
                         5            15                 4<br>                        14            28                 6<br>                        15            33                 9<br>                        16            34                31<br>
                        17            56                33<br>                        19            65                34<br>                        21            69                35</p>
<p><br>*********************************************************************************************************<br>Total TRNSYS Calculation Time:                          1.7500 Seconds</p>