[TRNSYS-users] Fwd: multiple adjacent zones to one surface ??

David BRADLEY d.bradley at tess-inc.com
Tue Feb 28 08:01:56 PST 2012


Santeri,
   As far as Trnsys3D and TRNBuild are concerned, zone 1 actually has 5 
walls: one facing west, one facing north, one facing east, one adjacent 
to zone 2 and one adjacent to zone 3. In Trnsys3D you have to draw a 
vertical line in zone 1 to break the one adjacent long wall into two 
adjacent long walls.
best,
  David


On 2/28/2012 08:21, Santeri Siren wrote:
> I think my picture did not show in the last message so here it is as 
> an attachment.
>
> Sorry for the mix up.
>
> Regards,
> Santeri Siren
>
> ---------- Forwarded message ----------
> From: *Santeri Siren* <santeri.siren1 at gmail.com 
> <mailto:santeri.siren1 at gmail.com>>
> Date: 2012/2/28
> Subject: multiple adjacent zones to one surface ??
> To: trnsys-users at cae.wisc.edu <mailto:trnsys-users at cae.wisc.edu>
>
>
> Dear all,
>
> I am trying to create my first trnsys 3d model with google sketchup. 
> Is it possible for one particular wall (or any other surface) to be 
> adjacent to two or more different zones.I am trying to illustrate my 
> question with a simple picture.
>
>
>
> If this is possible, could someone please tell me how to do it with 
> trnsys 3d.
>
> Regards,
> Santeri Siren
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120228/1a3073cd/attachment-0001.htm>


More information about the TRNSYS-users mailing list