[TRNSYS-users] Fwd: multiple adjacent zones to one surface ??

Santeri Siren santeri.siren1 at gmail.com
Tue Feb 28 06:21:15 PST 2012


I think my picture did not show in the last message so here it is as an
attachment.

Sorry for the mix up.

Regards,
Santeri Siren

---------- Forwarded message ----------
From: Santeri Siren <santeri.siren1 at gmail.com>
Date: 2012/2/28
Subject: multiple adjacent zones to one surface ??
To: trnsys-users at cae.wisc.edu


Dear all,

I am trying to create my first trnsys 3d model with google sketchup. Is it
possible for one particular wall (or any other surface) to be adjacent to
two or more different zones.I am trying to illustrate my question with a
simple picture.



If this is possible, could someone please tell me how to do it with trnsys
3d.

Regards,
Santeri Siren
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120228/f05339e5/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: example.bmp
Type: image/bmp
Size: 589878 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120228/f05339e5/attachment-0001.bin>


More information about the TRNSYS-users mailing list