[TRNSYS-users] Parameters walls when using Trnsys 3d Studio

[David BRADLEY]

Joke,
   Yes, that has been my method as well. Sometimes you can be a little 
bit clever in Trnsys3D using some of the wall constructions that you 
won't need (BND_WALL for example) to denote the other external wall 
constructions. If you do this, be careful to leave the wall set with the 
correct boundary condition ("outdoors" instead of "other side coefficients")
Best,
  David


On 2/16/2012 02:24, Joke De Beuckelaer wrote:
>
> Dear all,
>
> When you use the Trnsys 3d studio, you can only choose one type of 
> exterior wall in google sketchup.
>
> However, is it allowed to change the exterior wall (or window...) in 
> Trnbuild without the loss of any data? For example when you have a 
> building that has different types of walls and windows.
>
> Thanks in advance,
>
> Joke De Beuckelaer
>
> *ALWAYS LOOKING FOR GREAT PEOPLE 
> <http://www.vkgroup.be/en/news/vk-s-best-wishes-for-2012> *****
>
> ****DISCLAIMER****
> This communication is confidential and for the sole useof the 
> addressee. If you are not the intended recipient,
> please immediately notify the sender by e-mail at the address shown 
> and then delete it from your system
> without copying, disclosing or forwarding its contents. Thank you.
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120216/40e17956/attachment-0001.htm>