[TRNSYS-users] Parameters walls when using Trnsys 3d Studio

Joke De Beuckelaer joke.d at vkgroup.be
Thu Feb 16 00:24:43 PST 2012


Dear all,

When you use the Trnsys 3d studio, you can only choose one type of exterior wall in google sketchup.
However, is it allowed to change the exterior wall (or window...) in Trnbuild without the loss of any data? For example when you have a building that has different types of walls and windows.


Thanks in advance,

Joke De Beuckelaer

 ALWAYS LOOKING FOR GREAT PEOPLE<http://www.vkgroup.be/en/news/vk-s-best-wishes-for-2012>
****DISCLAIMER****
This communication is confidential and for the sole useof the addressee. If you are not the intended recipient,
please immediately notify the sender by e-mail at the address shown and then delete it from your system
without copying, disclosing or forwarding its contents. Thank you.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120216/fcde4904/attachment-0001.htm>


More information about the TRNSYS-users mailing list