[TRNSYS-users] problem with control signal of type 668

[Eva gklezakou]

Dear Sirs,

I think that something going wrong with the control signal of the type 668
because even though the signal from the controller is 0 and for this reason
both COP (output of type 668) of the heat pump and the heat transfer to
load (output of type 668) are 0 the heat pump power is not 0.
Thank you for your help.

Regards,
Eva
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120821/57eba4cf/attachment-0005.htm>