[TRNSYS-users] Hot air flow mixer

[Mazen Darwish]

Dear users

I want to model a flow mixer where hot air from a solar reciever will be
mixed with exhaust flue gases from the gas turbine
before entering a HRSG , i have tried using a tee piece for mixxing the
flows but the outlet temperature of the mixture is below
 the needed temperature which  is the gas exhaust temperature , can i use
another component to keep the temperature steady while controlling the flow
rate.

Thanks

Mazen Darwish
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120418/de39af3f/attachment-0005.htm>