[TRNSYS-users] PV problem (type 94)

[David BRADLEY]

Leona,
   There is no output power from Type48 because the load on the inverter 
(an input) is always zero. Can you give me a little more context as to 
what you are trying to accomplish with your simulation? I might be able 
to make a better suggestion if I had a clearer picture of the objective.
Best,
  David


On 4/9/2012 02:15, ͫͫ wrote:
>
> Dear David,
>
> i still can't get the right solution. so could you please check it for 
> me?
>
> Thanks and best regards.
>
> Leona
>
> 2012/1/6 David BRADLEY <d.bradley at tess-inc.com 
> <mailto:d.bradley at tess-inc.com>>
>
>     Leona,
>       Without seeing the project it's a little hard to tell. In some
>     cases, the Type48 takes care of the MPPT, in which case you should
>     use the Type48 voltage output as an input back to the Type94, in
>     which case you would get a value out of the "power out" output.
>     Kind regards,
>      David
>
>
>     On 1/6/2012 09:20, ͫͫ wrote:
>>     Dear David,
>>
>>     if i want to use type 48a after type 94a , which output is
>>     better? Because the output "power_out" is always 0, and the
>>     excess_power is nagative. ps, I want to use it for the heat pump.
>>
>>     Best regards
>>
>>     Leona
>>
>>
>>
>

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120409/5f8ed717/attachment-0001.htm>