[TRNSYS-users] Building Type56 // Geometry Data as Output?

[Marion Hiller]

Alex,

 

there is one output in Trnsys17: Surface Area NTYPE 113

 

In the upcoming release there is also the airnode volume available.

 

If you have a wish list of entities you may send it to me.

 

Marion

 

Dipl.-Ing. Marion Hiller 
TRANSSOLAR: KlimaEngineering - Technologien für energieeffizientes Bauen
und Nutzerkomfort in Gebäude 
Munich - New York - Stuttgart + 49.711.67976.0 

Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart 
Amtsgericht Stuttgart - HRB 23347, Steuernummer 99073/00911, USt-IdNr.:
DE152272639

Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
Dipl.Phys. Stefan Holst, Prof. Dipl.-Ing. Bleicher 

 

 

  _____  

Von: Alex Rachid [mailto:wow134 at hotmail.com] 
Gesendet: Sonntag, 1. April 2012 23:23
An: trnsys users
Betreff: [TRNSYS-users] Building Type56 // Geometry Data as Output?

 

Hi to All,

Concerning TYPE56; is there a way to get the building geometry
information (Total Area, Total Volume, Zone are, etc) as outputs in
order to use them inside equations in order to avoid retyping them every
time we modify, add or remove a Zone?

Do you have other ideas?

 

Thanks to All & Regards

Alex


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20120402/50a30736/attachment-0001.htm>