[TRNSYS-users] Type73 - Flat-Plate Collector

[Igor Grujic]

Dear Matt,

Thanks al lot for your quick reply, but I have one more question.

If I change the timestep to 0.125 (or smaller) what’s about the weather-values? (Those are generated for 1 year (8760 hours) in 1-hour-steps). 
Need to simulate a one-year-consumption of a house for which a have the hourly usage-values. Changing the time step will falsify the results, right?
(But I just gonna try it out)

Thanks again for the help

Best regards,
Igor

-------- Original-Nachricht --------
> Datum: Wed, 21 Sep 2011 10:15:24 -0500 (CDT)
> Von: "Matt Duffy" <duffy at tess-inc.com>
> An: "Igor Grujic" <igor.g at gmx.at>, trnsys-users at cae.wisc.edu
> Betreff: Re: [TRNSYS-users] Type73 - Flat-Plate Collector

> Dear Igor,First of all, please make sure that your timestep is small -
> probably under 0.125 hour. Type Type2b collector is recommended for a
> simulation like this. Honestly, there are few simulations where one should use
> Powell's method such as a PV connected to a pump. If you continue to have
> problems, please feel free to send to your local TRNSYS distributor or me.Best
> regards,Matt Duffy   ----- Original Message -----From: "Igor
> Grujic" >;igor.g at gmx.at

-- 
NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zurück-Garantie!		
Jetzt informieren: http://www.gmx.net/de/go/freephone