[TRNSYS-users] Problem with type 9a reading data values

kordou kordou at gmail.com
Tue Sep 20 01:59:35 PDT 2011


Hi,

 

I am trying to valuate a new type that I have made in trnsys 16 with some
experimental measurements.

To do this I need to import some measurement weather data (Total solar rad,
Tamb, Wind speed and direction, RH, a room temperature, and a voltage) 

The measurements that I have are based on time interval of 5min.

 

So I fount that I could use the type9a (Utility -->Data readers -->Generic
Data Files-->First Line is Simulation Start -->Free Format) 

 

The problem that I have is that if I input a dt=5min on type9a and the same
dt in simulation, it does not run. 

If I Input dt=5min on Type9a and 1min in simulation it runs but in results
of the total simulation time is the double minus 1 hour from the expected!!!

With that I mean that I got the results of one day (24 hr) twice in this
time period minus 1 hr.  (For 24 hours of simulation I got a curve of 47
hours)

 

It is like the trnsys reads the input file in about the half time of the
real so I get 2 times this file 

 

Could someone help here?

 

Thank you in advanced 

 

Regards

Kordou

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110920/6d3aa12f/attachment-0005.htm>


More information about the TRNSYS-users mailing list